Pull ARM SoC fixes from Arnd Bergmann:
 "Most of the changes are devicetree fixes for NXP, Mediatek, Rockchips
  Arm machines as well as Microchip RISC-V, and most of these address
  build-time warnings for spec violations and other minor issues. One of
  the Mediatek warnings was enabled by default and prevented a clean
  build.

  The ones that address serious runtime issues are all on the i.MX
  platform:

   - a boot time panic on imx8qm

   - USB hanging under load on imx8

   - regressions on the imx93 ethernet phy

  Code fixes include a minor error handling for the i.MX PMU driver, and
  a number of firmware driver fixes:

   - OP-TEE fix for supplicant based device enumeration, and a new sysfs
     attribute to needed to fix a race against userspace

   - Arm SCMI fix for possible truncation/overflow in the frequency
     computations

   - Multiple FF-A fixes for the newly added notification support"

* tag 'soc-fixes-6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (55 commits)
  MAINTAINERS: change the S32G2 maintainer's email address.
  arm64: dts: rockchip: Fix eMMC Data Strobe PD on rk3588
  ARM: dts: imx28-xea: Pass the 'model' property
  ARM: dts: imx7: Declare timers compatible with fsl,imx6dl-gpt
  MAINTAINERS: reinstate freescale ARM64 DT directory in i.MX entry
  arm64: dts: imx8-apalis: set wifi regulator to always-on
  ARM: imx: Check return value of devm_kasprintf in imx_mmdc_perf_init
  arm64: dts: imx8ulp: update gpio node name to align with register address
  arm64: dts: imx93: update gpio node name to align with register address
  arm64: dts: imx93: correct mediamix power
  arm64: dts: imx8qm: Add imx8qm's own pm to avoid panic during startup
  arm64: dts: freescale: imx8-ss-dma: Fix #pwm-cells
  arm64: dts: freescale: imx8-ss-lsio: Fix #pwm-cells
  dt-bindings: pwm: imx-pwm: Unify #pwm-cells for all compatibles
  ARM: dts: imx6ul-pico: Describe the Ethernet PHY clock
  arm64: dts: imx8mp: imx8mq: Add parkmode-disable-ss-quirk on DWC3
  arm64: dts: rockchip: Fix PCI node addresses on rk3399-gru
  arm64: dts: rockchip: drop interrupt-names property from rk3588s dfi
  firmware: arm_scmi: Fix possible frequency truncation when using level indexing mode
  firmware: arm_scmi: Fix frequency truncation by promoting multiplier type
  ...

OP-TEE fix for supplicant based device enumeration

Adds a sysfs attribute for devices depending on supplicant services so
that the user-space service can detect and detach those devices before
closing the supplicant

* tag 'optee-supplicant-fix-for-v6.7' of git://git.linaro.org:/people/jens.wiklander/linux-tee:
  tee: optee: Fix supplicant based device enumeration

Link: https://lore.kernel.org/r/20231114153113.GA1310615@rayden
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The commit c7d80059b086 ("leds: class: Store the color index in struct
led_classdev") introduced a new sysfs entry "color" that is commonly
created for the led classdev.  Unfortunately, this conflicts with the
"color" sysfs entry of already existing drivers such as Logitech HID
or System76 ACPI drivers.  The driver probe fails due to the conflict,
hence it leads to a severe regression with the missing keyboard, for
example.

This patch reverts partially the change in the commit above for
removing the led class color sysfs entries again for addressing the
regressions.  The newly introduced led_classdev.color field is kept as
it's already used by other driver.

Fixes: c7d80059b086 ("leds: class: Store the color index in struct led_classdev")
Reported-by: Johannes Penßel <johannes.penssel@gmail.com>
Closes: https://lore.kernel.org/r/b5646db3-acff-45aa-baef-df3f660486fb@gmail.com
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218045
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218155
Link: https://bugzilla.suse.com/show_bug.cgi?id=1217172
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231121162359.9332-1-tiwai@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>

Pull virtio updates from Michael Tsirkin:
 "vhost,virtio,vdpa: features, fixes, cleanups.

  vdpa/mlx5:
   - VHOST_BACKEND_F_ENABLE_AFTER_DRIVER_OK
   - new maintainer

  vdpa:
   - support for vq descriptor mappings
   - decouple reset of iotlb mapping from device reset

  and fixes, cleanups all over the place"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (34 commits)
  vdpa_sim: implement .reset_map support
  vdpa/mlx5: implement .reset_map driver op
  vhost-vdpa: clean iotlb map during reset for older userspace
  vdpa: introduce .compat_reset operation callback
  vhost-vdpa: introduce IOTLB_PERSIST backend feature bit
  vhost-vdpa: reset vendor specific mapping to initial state in .release
  vdpa: introduce .reset_map operation callback
  virtio_pci: add check for common cfg size
  virtio-blk: fix implicit overflow on virtio_max_dma_size
  virtio_pci: add build offset check for the new common cfg items
  virtio: add definition of VIRTIO_F_NOTIF_CONFIG_DATA feature bit
  vduse: make vduse_class constant
  vhost-scsi: Spelling s/preceeding/preceding/g
  virtio: kdoc for struct virtio_pci_modern_device
  vdpa: Update sysfs ABI documentation
  MAINTAINERS: Add myself as mlx5_vdpa driver
  virtio-balloon: correct the comment of virtballoon_migratepage()
  mlx5_vdpa: offer VHOST_BACKEND_F_ENABLE_AFTER_DRIVER_OK
  vdpa/mlx5: Update cvq iotlb mapping on ASID change
  vdpa/mlx5: Make iotlb helper functions more generic
  ...

Pull i3c updates from Alexandre Belloni:
 "There are now more fixes because as stated in my previous pull
  request, people now have access to actual hardware.

  Core:

   - handle IBI in the proper order

  Drivers:

   - cdns: fix status register access

   - mipi-i3c-hci: many fixes now that the driver has been actually
     tested

   - svc: many IBI fixes, correct compatible string, fix hot join corner
     cases"

* tag 'i3c/for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (29 commits)
  i3c: master: handle IBIs in order they came
  i3c: master: mipi-i3c-hci: Fix a kernel panic for accessing DAT_data.
  i3c: master: svc: fix compatibility string mismatch with binding doc
  i3c: master: svc: fix random hot join failure since timeout error
  i3c: master: svc: fix SDA keep low when polling IBIWON timeout happen
  i3c: master: svc: fix check wrong status register in irq handler
  i3c: master: svc: fix ibi may not return mandatory data byte
  i3c: master: svc: fix wrong data return when IBI happen during start frame
  i3c: master: svc: fix race condition in ibi work thread
  i3c: Fix typo "Provisional ID" to "Provisioned ID"
  i3c: Fix potential refcount leak in i3c_master_register_new_i3c_devs
  i3c: mipi-i3c-hci: Resume controller after aborted transfer
  i3c: mipi-i3c-hci: Resume controller explicitly
  i3c: mipi-i3c-hci: Fix missing xfer->completion in hci_cmd_v1_daa()
  i3c: mipi-i3c-hci: Do not unmap region not mapped for transfer
  i3c: mipi-i3c-hci: Set number of SW enabled Ring Bundles earlier
  i3c: mipi-i3c-hci: Fix race between bus cleanup and interrupt
  i3c: mipi-i3c-hci: Set ring start request together with enable
  i3c: mipi-i3c-hci: Remove BUG() when Ring Abort request times out
  i3c: mipi-i3c-hci: Fix out of bounds access in hci_dma_irq_handler
  ...

Pull CXL (Compute Express Link) updates from Dan Williams:
 "The main new functionality this time is work to allow Linux to
  natively handle CXL link protocol errors signalled via PCIe AER for
  current generation CXL platforms. This required some enlightenment of
  the PCIe AER core to workaround the fact that current generation RCH
  (Restricted CXL Host) platforms physically hide topology details and
  registers via a mechanism called RCRB (Root Complex Register Block).

  The next major highlight is reworks to address bugs in parsing region
  configurations for next generation VH (Virtual Host) topologies. The
  old broken algorithm is replaced with a simpler one that significantly
  increases the number of region configurations supported by Linux. This
  is again relevant for error handling so that forward and reverse
  address translation of memory errors can be carried out by Linux for
  memory regions instantiated by platform firmware.

  As for other cross-tree work, the ACPI table parsing code has been
  refactored for reuse parsing the "CDAT" structure which is an
  ACPI-like data structure that is reported by CXL devices. That work is
  in preparation for v6.8 support for CXL QoS. Think of this as dynamic
  generation of NUMA node topology information generated by Linux rather
  than platform firmware.

  Lastly, a number of internal object lifetime issues have been resolved
  along with misc. fixes and feature updates (decoders_committed sysfs
  ABI).

  Summary:

   - Add support for RCH (Restricted CXL Host) Error recovery

   - Fix several region assembly bugs

   - Fix mem-device lifetime issues relative to the sanitize command and
     RCH topology.

   - Refactor ACPI table parsing for CDAT parsing re-use in preparation
     for CXL QOS support"

* tag 'cxl-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (50 commits)
  lib/fw_table: Remove acpi_parse_entries_array() export
  cxl/pci: Change CXL AER support check to use native AER
  cxl/hdm: Remove broken error path
  cxl/hdm: Fix && vs || bug
  acpi: Move common tables helper functions to common lib
  cxl: Add support for reading CXL switch CDAT table
  cxl: Add checksum verification to CDAT from CXL
  cxl: Export QTG ids from CFMWS to sysfs as qos_class attribute
  cxl: Add decoders_committed sysfs attribute to cxl_port
  cxl: Add cxl_decoders_committed() helper
  cxl/core/regs: Rework cxl_map_pmu_regs() to use map->dev for devm
  cxl/core/regs: Rename phys_addr in cxl_map_component_regs()
  PCI/AER: Unmask RCEC internal errors to enable RCH downstream port error handling
  PCI/AER: Forward RCH downstream port-detected errors to the CXL.mem dev handler
  cxl/pci: Disable root port interrupts in RCH mode
  cxl/pci: Add RCH downstream port error logging
  cxl/pci: Map RCH downstream AER registers for logging protocol errors
  cxl/pci: Update CXL error logging to use RAS register address
  PCI/AER: Refactor cper_print_aer() for use by CXL driver module
  cxl/pci: Add RCH downstream port AER register discovery
  ...

Pull unified attestation reporting from Dan Williams:
 "In an ideal world there would be a cross-vendor standard attestation
  report format for confidential guests along with a common device
  definition to act as the transport.

  In the real world the situation ended up with multiple platform
  vendors inventing their own attestation report formats with the
  SEV-SNP implementation being a first mover to define a custom
  sev-guest character device and corresponding ioctl(). Later, this
  configfs-tsm proposal intercepted an attempt to add a tdx-guest
  character device and a corresponding new ioctl(). It also anticipated
  ARM and RISC-V showing up with more chardevs and more ioctls().

  The proposal takes for granted that Linux tolerates the vendor report
  format differentiation until a standard arrives. From talking with
  folks involved, it sounds like that standardization work is unlikely
  to resolve anytime soon. It also takes the position that kernfs ABIs
  are easier to maintain than ioctl(). The result is a shared configfs
  mechanism to return per-vendor report-blobs with the option to later
  support a standard when that arrives.

  Part of the goal here also is to get the community into the
  "uncomfortable, but beneficial to the long term maintainability of the
  kernel" state of talking to each other about their differentiation and
  opportunities to collaborate. Think of this like the device-driver
  equivalent of the common memory-management infrastructure for
  confidential-computing being built up in KVM.

  As for establishing an "upstream path for cross-vendor
  confidential-computing device driver infrastructure" this is something
  I want to discuss at Plumbers. At present, the multiple vendor
  proposals for assigning devices to confidential computing VMs likely
  needs a new dedicated repository and maintainer team, but that is a
  discussion for v6.8.

  For now, Greg and Thomas have acked this approach and this is passing
  is AMD, Intel, and Google tests.

  Summary:

   - Introduce configfs-tsm as a shared ABI for confidential computing
     attestation reports

   - Convert sev-guest to additionally support configfs-tsm alongside
     its vendor specific ioctl()

   - Added signed attestation report retrieval to the tdx-guest driver
     forgoing a new vendor specific ioctl()

   - Misc cleanups and a new __free() annotation for kvfree()"

* tag 'tsm-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/linux:
  virt: tdx-guest: Add Quote generation support using TSM_REPORTS
  virt: sevguest: Add TSM_REPORTS support for SNP_GET_EXT_REPORT
  mm/slab: Add __free() support for kvfree
  virt: sevguest: Prep for kernel internal get_ext_report()
  configfs-tsm: Introduce a shared ABI for attestation reports
  virt: coco: Add a coco/Makefile and coco/Kconfig
  virt: sevguest: Fix passing a stack buffer as a scatterlist target

Pull USB/Thunderbolt updates from Greg KH:
 "Here is the "big" set of USB and Thunderbolt changes for 6.7-rc1.
  Nothing really major in here, just lots of constant development for
  new hardware. Included in here are:

   - Thunderbolt (i.e. USB4) fixes for reported issues and support for
     new hardware types and devices

   - USB typec additions of new drivers and cleanups for some existing
     ones

   - xhci cleanups and expanded tracing support and some platform
     specific updates

   - USB "La Jolla Cove Adapter (LJCA)" support added, and the gpio,
     spi, and i2c drivers for that type of device (all acked by the
     respective subsystem maintainers.)

   - lots of USB gadget driver updates and cleanups

   - new USB dwc3 platforms supported, as well as other dwc3 fixes and
     cleanups

   - USB chipidea driver updates

   - other smaller driver cleanups and additions, full details in the
     shortlog

  All of these have been in the linux-next tree for a while with no
  reported problems"

* tag 'usb-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (167 commits)
  usb: gadget: uvc: Add missing initialization of ssp config descriptor
  usb: storage: set 1.50 as the lower bcdDevice for older "Super Top" compatibility
  usb: raw-gadget: report suspend, resume, reset, and disconnect events
  usb: raw-gadget: don't disable device if usb_ep_queue fails
  usb: raw-gadget: properly handle interrupted requests
  usb:cdnsp: remove TRB_FLUSH_ENDPOINT command
  usb: gadget: aspeed_udc: Convert to platform remove callback returning void
  dt-bindings: usb: fsa4480: Add compatible for OCP96011
  usb: typec: fsa4480: Add support to swap SBU orientation
  dt-bindings: usb: fsa4480: Add data-lanes property to endpoint
  usb: typec: tcpm: Fix NULL pointer dereference in tcpm_pd_svdm()
  Revert "dt-bindings: usb: Add bindings for multiport properties on DWC3 controller"
  Revert "dt-bindings: usb: qcom,dwc3: Add bindings for SC8280 Multiport"
  thunderbolt: Fix one kernel-doc comment
  usb: gadget: f_ncm: Always set current gadget in ncm_bind()
  usb: core: Remove duplicated check in usb_hub_create_port_device
  usb: typec: tcpm: Add additional checks for contaminant
  arm64: dts: rockchip: rk3588s: Add USB3 host controller
  usb: dwc3: add optional PHY interface clocks
  dt-bindings: usb: add rk3588 compatible to rockchip,dwc3
  ...

Pull tty and serial updates from Greg KH:
 "Here is the big set of tty/serial driver changes for 6.7-rc1. Included
  in here are:

   - console/vgacon cleanups and removals from Arnd

   - tty core and n_tty cleanups from Jiri

   - lots of 8250 driver updates and cleanups

   - sc16is7xx serial driver updates

   - dt binding updates

   - first set of port lock wrapers from Thomas for the printk fixes
     coming in future releases

   - other small serial and tty core cleanups and updates

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (193 commits)
  serdev: Replace custom code with device_match_acpi_handle()
  serdev: Simplify devm_serdev_device_open() function
  serdev: Make use of device_set_node()
  tty: n_gsm: add copyright Siemens Mobility GmbH
  tty: n_gsm: fix race condition in status line change on dead connections
  serial: core: Fix runtime PM handling for pending tx
  vgacon: fix mips/sibyte build regression
  dt-bindings: serial: drop unsupported samsung bindings
  tty: serial: samsung: drop earlycon support for unsupported platforms
  tty: 8250: Add note for PX-835
  tty: 8250: Fix IS-200 PCI ID comment
  tty: 8250: Add Brainboxes Oxford Semiconductor-based quirks
  tty: 8250: Add support for Intashield IX cards
  tty: 8250: Add support for additional Brainboxes PX cards
  tty: 8250: Fix up PX-803/PX-857
  tty: 8250: Fix port count of PX-257
  tty: 8250: Add support for Intashield IS-100
  tty: 8250: Add support for Brainboxes UP cards
  tty: 8250: Add support for additional Brainboxes UC cards
  tty: 8250: Remove UC-257 and UC-431
  ...

Pull char/misc updates from Greg KH:
 "Here is the big set of char/misc and other small driver subsystem
  changes for 6.7-rc1. Included in here are:

   - IIO subsystem driver updates and additions (largest part of this
     pull request)

   - FPGA subsystem driver updates

   - Counter subsystem driver updates

   - ICC subsystem driver updates

   - extcon subsystem driver updates

   - mei driver updates and additions

   - nvmem subsystem driver updates and additions

   - comedi subsystem dependency fixes

   - parport driver fixups

   - cdx subsystem driver and core updates

   - splice support for /dev/zero and /dev/full

   - other smaller driver cleanups

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (326 commits)
  cdx: add sysfs for subsystem, class and revision
  cdx: add sysfs for bus reset
  cdx: add support for bus enable and disable
  cdx: Register cdx bus as a device on cdx subsystem
  cdx: Create symbol namespaces for cdx subsystem
  cdx: Introduce lock to protect controller ops
  cdx: Remove cdx controller list from cdx bus system
  dts: ti: k3-am625-beagleplay: Add beaglecc1352
  greybus: Add BeaglePlay Linux Driver
  dt-bindings: net: Add ti,cc1352p7
  dt-bindings: eeprom: at24: allow NVMEM cells based on old syntax
  dt-bindings: nvmem: SID: allow NVMEM cells based on old syntax
  Revert "nvmem: add new config option"
  MAINTAINERS: coresight: Add missing Coresight files
  misc: pci_endpoint_test: Add deviceID for J721S2 PCIe EP device support
  firmware: xilinx: Move EXPORT_SYMBOL_GPL next to zynqmp_pm_feature definition
  uacce: make uacce_class constant
  ocxl: make ocxl_class constant
  cxl: make cxl_class constant
  misc: phantom: make phantom_class constant
  ...