<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux-toradex.git/Documentation/admin-guide/media, branch master</title>
<subtitle>Linux kernel for Apalis and Colibri modules</subtitle>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/'/>
<entry>
<title>media: em28xx: add StarTech.com SVID2USB23 with working audio capture</title>
<updated>2026-10-01T10:45:50+00:00</updated>
<author>
<name>David Wood</name>
<email>d01.devel@gmail.com</email>
</author>
<published>2026-09-18T22:07:32+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=afb527c549db7435685e0973d79a2cc2b86ee491'/>
<id>afb527c549db7435685e0973d79a2cc2b86ee491</id>
<content type='text'>
The StarTech.com SVID2USB23 is an EM2860 + TVP5150AM1 + EMP202 capture
dongle that ships with the generic eb1a:5051 USB ID, so it is picked up
as the EM2860/TVP5150 reference design. Video works, but analog audio
capture is silent: the ALSA device yields a flat noise floor of about
-85 dBFS whether or not anything is connected.

Audio on this board is not on the em28xx vendor path. Chip config
register 0x00 reads 0x50, so the board exposes a USB Audio Class
interface, claimed by snd-usb-audio, that is fed by the EMP202 ADC.
The ADC record source is selected by AC97_REC_SEL, which
em28xx_audio_analog_set() only programs when EM28XX_AOUT_PCM_IN is set
in the input's .aout. With .amux alone only the mixer volume registers
are written, and the record source stays at its reset value (Mic, not
wired on this board), so the ADC captures nothing.

Add a board entry for the SVID2USB23 with .aout selecting the PCM
record path from Line In, and identify the board by its EEPROM hash,
leaving the reference design entry untouched. Boards with this USB ID
that do not match a hash keep the reference design as before, without
any extra log output. card=114 also selects the entry by hand.

Verified on the SVID2USB23: the board is identified as card=114 and the
driver programs AC97_REC_SEL to 0x0404 on its own at probe. Toggling
that register alone with everything else held constant is what
separates working (-22 dBFS, line level) from silent (-85 dBFS)
capture. AC97_POWERDOWN reads 0x420d (ADC, analog and reference all
ready) throughout, so this is not a power or GPIO problem.

The V4L2 mute control still defaults to 1 and gates the bridge audio
path, so clearing it remains necessary to hear anything; that is a
separate issue.

Signed-off-by: David Wood &lt;d01.devel@gmail.com&gt;
Signed-off-by: Hans Verkuil &lt;hverkuil+cisco@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The StarTech.com SVID2USB23 is an EM2860 + TVP5150AM1 + EMP202 capture
dongle that ships with the generic eb1a:5051 USB ID, so it is picked up
as the EM2860/TVP5150 reference design. Video works, but analog audio
capture is silent: the ALSA device yields a flat noise floor of about
-85 dBFS whether or not anything is connected.

Audio on this board is not on the em28xx vendor path. Chip config
register 0x00 reads 0x50, so the board exposes a USB Audio Class
interface, claimed by snd-usb-audio, that is fed by the EMP202 ADC.
The ADC record source is selected by AC97_REC_SEL, which
em28xx_audio_analog_set() only programs when EM28XX_AOUT_PCM_IN is set
in the input's .aout. With .amux alone only the mixer volume registers
are written, and the record source stays at its reset value (Mic, not
wired on this board), so the ADC captures nothing.

Add a board entry for the SVID2USB23 with .aout selecting the PCM
record path from Line In, and identify the board by its EEPROM hash,
leaving the reference design entry untouched. Boards with this USB ID
that do not match a hash keep the reference design as before, without
any extra log output. card=114 also selects the entry by hand.

Verified on the SVID2USB23: the board is identified as card=114 and the
driver programs AC97_REC_SEL to 0x0404 on its own at probe. Toggling
that register alone with everything else held constant is what
separates working (-22 dBFS, line level) from silent (-85 dBFS)
capture. AC97_POWERDOWN reads 0x420d (ADC, analog and reference all
ready) throughout, so this is not a power or GPIO problem.

The V4L2 mute control still defaults to 1 and gates the bridge audio
path, so clearing it remains necessary to hear anything; that is a
separate issue.

Signed-off-by: David Wood &lt;d01.devel@gmail.com&gt;
Signed-off-by: Hans Verkuil &lt;hverkuil+cisco@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>media: Documentation: vivid.rst: Remove stale capture overlay mentions</title>
<updated>2026-09-23T12:54:49+00:00</updated>
<author>
<name>Hyeonjun Hong</name>
<email>hyeonjunhong330@gmail.com</email>
</author>
<published>2026-09-13T20:24:22+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=87090658cf2fa31e8cf0d52f0c009087ccfe57d1'/>
<id>87090658cf2fa31e8cf0d52f0c009087ccfe57d1</id>
<content type='text'>
The introduction of vivid.rst says that the framebuffer device is
available for testing capture and output overlays, and the feature
list mentions capture and output overlay support.

Commit ccaa9d50ca73 ("media: vivid: drop overlay support") removed
capture overlay support, and vivid now only implements output overlays.

Update both places to mention output overlays only.

Assisted-by: LLM
Signed-off-by: Hyeonjun Hong &lt;hyeonjunhong330@gmail.com&gt;
Signed-off-by: Hans Verkuil &lt;hverkuil+cisco@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The introduction of vivid.rst says that the framebuffer device is
available for testing capture and output overlays, and the feature
list mentions capture and output overlay support.

Commit ccaa9d50ca73 ("media: vivid: drop overlay support") removed
capture overlay support, and vivid now only implements output overlays.

Update both places to mention output overlays only.

Assisted-by: LLM
Signed-off-by: Hyeonjun Hong &lt;hyeonjunhong330@gmail.com&gt;
Signed-off-by: Hans Verkuil &lt;hverkuil+cisco@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge tag 'docs-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/docs/linux</title>
<updated>2026-08-20T17:31:50+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2026-08-20T17:31:50+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=72fdff1416e280e2baaa3cca69574defb998437e'/>
<id>72fdff1416e280e2baaa3cca69574defb998437e</id>
<content type='text'>
Pull documentation updates from Jonathan Corbet:
 "It has been a not-too-busy cycle for docs; here's the highlights:

   - A (hopefully) consensus change to our LLM-attribution requirements,
     removing the specific model name from the Assisted-by tag

   - A couple of new realtime documents

   - Various docs-build-system fixes

   - Ongoing work with the Chinese, Portuguese, and Japanese
     translations

  ...and lots of typo fixes, grammar tweaks, etc"

* tag 'docs-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/docs/linux: (85 commits)
  Doc: admin-guide: pm: Remove unnecessary backticks and fix a spell
  Documentation: Extend the real-time hardware bits with some firmware bits
  docs: pt_BR: Reorganize process/index.rst to follow english structure
  docs: conf.py: fix the 'utf-8' typo
  doc tools: fix 'path' typos
  Documentation: real-time: Add kernel configuration guide
  docs: python: abi_regex: convert adjacent index placeholders
  docs: python: abi_regex: catch the right exception for a bad regex
  docs: sphinx-build-wrapper: include localversion in kernel version string
  Documentation: html: adjust sidebar section titles styling
  Documentation: html: show sections in the sidebar
  checkpatch.pl: adapt to new Assisted-by: format
  MAINTAINERS: update Traditional Chinese documentation maintainers
  docs: pt_BR: process: Translate CVE documentation
  docs: pt_BR: translate the management-style.rst to Brazilian Portuguese
  docs: xforms_lists: support DEFINE_IDTENTRY_IRQ()
  coding-assistants: simplify attribution
  docs: translations: pt_BR: translate email-clients.rst
  docs: pt_BR: process: Translate the security-bugs.rst
  doc:it_IT: align doc-guide translation
  ...
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull documentation updates from Jonathan Corbet:
 "It has been a not-too-busy cycle for docs; here's the highlights:

   - A (hopefully) consensus change to our LLM-attribution requirements,
     removing the specific model name from the Assisted-by tag

   - A couple of new realtime documents

   - Various docs-build-system fixes

   - Ongoing work with the Chinese, Portuguese, and Japanese
     translations

  ...and lots of typo fixes, grammar tweaks, etc"

* tag 'docs-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/docs/linux: (85 commits)
  Doc: admin-guide: pm: Remove unnecessary backticks and fix a spell
  Documentation: Extend the real-time hardware bits with some firmware bits
  docs: pt_BR: Reorganize process/index.rst to follow english structure
  docs: conf.py: fix the 'utf-8' typo
  doc tools: fix 'path' typos
  Documentation: real-time: Add kernel configuration guide
  docs: python: abi_regex: convert adjacent index placeholders
  docs: python: abi_regex: catch the right exception for a bad regex
  docs: sphinx-build-wrapper: include localversion in kernel version string
  Documentation: html: adjust sidebar section titles styling
  Documentation: html: show sections in the sidebar
  checkpatch.pl: adapt to new Assisted-by: format
  MAINTAINERS: update Traditional Chinese documentation maintainers
  docs: pt_BR: process: Translate CVE documentation
  docs: pt_BR: translate the management-style.rst to Brazilian Portuguese
  docs: xforms_lists: support DEFINE_IDTENTRY_IRQ()
  coding-assistants: simplify attribution
  docs: translations: pt_BR: translate email-clients.rst
  docs: pt_BR: process: Translate the security-bugs.rst
  doc:it_IT: align doc-guide translation
  ...
</pre>
</div>
</content>
</entry>
<entry>
<title>Documentation: admin-guide: fix brackets and translation issue</title>
<updated>2026-07-15T16:51:27+00:00</updated>
<author>
<name>Manuel Ebner</name>
<email>manuelebner@mailbox.org</email>
</author>
<published>2026-06-29T11:08:13+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=d1bb6502294ead503abf49234368fe10c2f0e18d'/>
<id>d1bb6502294ead503abf49234368fe10c2f0e18d</id>
<content type='text'>
Add missing ']' and replace 'neuer Name' with 'new Name'.

Signed-off-by: Manuel Ebner &lt;manuelebner@mailbox.org&gt;
Signed-off-by: Jonathan Corbet &lt;corbet@lwn.net&gt;
Message-ID: &lt;20260629110812.69420-2-manuelebner@mailbox.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Add missing ']' and replace 'neuer Name' with 'new Name'.

Signed-off-by: Manuel Ebner &lt;manuelebner@mailbox.org&gt;
Signed-off-by: Jonathan Corbet &lt;corbet@lwn.net&gt;
Message-ID: &lt;20260629110812.69420-2-manuelebner@mailbox.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>media: em28xx: Add StarTech SVID2USB232</title>
<updated>2026-07-10T07:53:50+00:00</updated>
<author>
<name>Luciano Ciccariello</name>
<email>xeeynamo@hotmail.com</email>
</author>
<published>2026-05-20T14:20:10+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=bedd5ea6b718741fff04ffbfe6ec803ca62841cd'/>
<id>bedd5ea6b718741fff04ffbfe6ec803ca62841cd</id>
<content type='text'>
Add support for the StarTech SVID2USB232 USB analog video grabber
(USB ID eb1a:8286). The device uses the Empia EM28281 bridge, a
member of the em2828X family with an integrated video decoder.

Reuses the EM28XX_BUILTIN decoder path introduced in commit
8e53399c63c3 ("media: em28xx: Add support for Empia em2828X bridge").
The standard PAL/NTSC switching and composite/S-Video input
switching in em2828X_decoder_set_std() handle this board without
board-specific code.

Inputs:
 - Composite video
 - S-Video
 - Analog stereo audio (line in)

Tested on hardware with a PAL signal on both S-Video and composite
inputs (ffplay -f v4l2 /dev/video0).

This supersedes an earlier RFC posting from before EM28XX_BUILTIN was
available, which proposed a custom EM28XX_I2C_ALGO_EM28281_INTEGRATED
TVP5150-bridge algorithm. That approach is no longer necessary now that
the em2828X bridge support landed.

Link: https://lore.kernel.org/all/20260119185921.575666-1-xeeynamo@hotmail.com/
Signed-off-by: Luciano Ciccariello &lt;xeeynamo@hotmail.com&gt;
Signed-off-by: Hans Verkuil &lt;hverkuil+cisco@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Add support for the StarTech SVID2USB232 USB analog video grabber
(USB ID eb1a:8286). The device uses the Empia EM28281 bridge, a
member of the em2828X family with an integrated video decoder.

Reuses the EM28XX_BUILTIN decoder path introduced in commit
8e53399c63c3 ("media: em28xx: Add support for Empia em2828X bridge").
The standard PAL/NTSC switching and composite/S-Video input
switching in em2828X_decoder_set_std() handle this board without
board-specific code.

Inputs:
 - Composite video
 - S-Video
 - Analog stereo audio (line in)

Tested on hardware with a PAL signal on both S-Video and composite
inputs (ffplay -f v4l2 /dev/video0).

This supersedes an earlier RFC posting from before EM28XX_BUILTIN was
available, which proposed a custom EM28XX_I2C_ALGO_EM28281_INTEGRATED
TVP5150-bridge algorithm. That approach is no longer necessary now that
the em2828X bridge support landed.

Link: https://lore.kernel.org/all/20260119185921.575666-1-xeeynamo@hotmail.com/
Signed-off-by: Luciano Ciccariello &lt;xeeynamo@hotmail.com&gt;
Signed-off-by: Hans Verkuil &lt;hverkuil+cisco@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Documentation: admin-guide: media: add rk3588 vicap</title>
<updated>2026-05-28T19:10:01+00:00</updated>
<author>
<name>Michael Riesch</name>
<email>michael.riesch@collabora.com</email>
</author>
<published>2026-05-22T21:23:07+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=804ed52335e93d8e94dc44ae7d4c31f54efbb5fa'/>
<id>804ed52335e93d8e94dc44ae7d4c31f54efbb5fa</id>
<content type='text'>
Add a section that describes the Rockchip RK3588 VICAP.

Reviewed-by: Mehdi Djait &lt;mehdi.djait@linux.intel.com&gt;
Signed-off-by: Michael Riesch &lt;michael.riesch@collabora.com&gt;
Signed-off-by: Sakari Ailus &lt;sakari.ailus@linux.intel.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Add a section that describes the Rockchip RK3588 VICAP.

Reviewed-by: Mehdi Djait &lt;mehdi.djait@linux.intel.com&gt;
Signed-off-by: Michael Riesch &lt;michael.riesch@collabora.com&gt;
Signed-off-by: Sakari Ailus &lt;sakari.ailus@linux.intel.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Documentation: add documentation of AMD isp 4 driver</title>
<updated>2026-05-06T10:48:10+00:00</updated>
<author>
<name>Bin Du</name>
<email>Bin.Du@amd.com</email>
</author>
<published>2026-05-06T09:32:49+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=3cd9b7011519c3fffffb7b6752fc7603be52dc1d'/>
<id>3cd9b7011519c3fffffb7b6752fc7603be52dc1d</id>
<content type='text'>
Add documentation for AMD ISP 4 and describe the main components

Co-developed-by: Svetoslav Stoilov &lt;Svetoslav.Stoilov@amd.com&gt;
Signed-off-by: Svetoslav Stoilov &lt;Svetoslav.Stoilov@amd.com&gt;
Signed-off-by: Bin Du &lt;Bin.Du@amd.com&gt;
Reviewed-by: Mario Limonciello (AMD) &lt;superm1@kernel.org&gt;
Reviewed-by: Sultan Alsawaf &lt;sultan@kerneltoast.com&gt;
Tested-by: Alexey Zagorodnikov &lt;xglooom@gmail.com&gt;
Tested-by: Kate Hsuan &lt;hpa@redhat.com&gt;
Signed-off-by: Sakari Ailus &lt;sakari.ailus@linux.intel.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Add documentation for AMD ISP 4 and describe the main components

Co-developed-by: Svetoslav Stoilov &lt;Svetoslav.Stoilov@amd.com&gt;
Signed-off-by: Svetoslav Stoilov &lt;Svetoslav.Stoilov@amd.com&gt;
Signed-off-by: Bin Du &lt;Bin.Du@amd.com&gt;
Reviewed-by: Mario Limonciello (AMD) &lt;superm1@kernel.org&gt;
Reviewed-by: Sultan Alsawaf &lt;sultan@kerneltoast.com&gt;
Tested-by: Alexey Zagorodnikov &lt;xglooom@gmail.com&gt;
Tested-by: Kate Hsuan &lt;hpa@redhat.com&gt;
Signed-off-by: Sakari Ailus &lt;sakari.ailus@linux.intel.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>media:admin-guide:mgb4: Add zDML color mapping info</title>
<updated>2026-03-16T10:51:55+00:00</updated>
<author>
<name>Martin Tůma</name>
<email>martin.tuma@digiteqautomotive.com</email>
</author>
<published>2026-01-27T12:43:08+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=6cc2b8d987477c5dce5eee4d78b226c981386fbb'/>
<id>6cc2b8d987477c5dce5eee4d78b226c981386fbb</id>
<content type='text'>
Document the zDML (Audi Digital Matrix Light) color mapping option for
the inputs and the new outputs color mapping property.

Signed-off-by: Martin Tůma &lt;martin.tuma@digiteqautomotive.com&gt;
Signed-off-by: Hans Verkuil &lt;hverkuil+cisco@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Document the zDML (Audi Digital Matrix Light) color mapping option for
the inputs and the new outputs color mapping property.

Signed-off-by: Martin Tůma &lt;martin.tuma@digiteqautomotive.com&gt;
Signed-off-by: Hans Verkuil &lt;hverkuil+cisco@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>media: staging: Drop starfive-camss from staging</title>
<updated>2026-03-11T00:05:30+00:00</updated>
<author>
<name>Jai Luthra</name>
<email>jai.luthra@ideasonboard.com</email>
</author>
<published>2026-03-03T09:24:06+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=70eaeee95f7b4813737b9e529b4b33b3e9928336'/>
<id>70eaeee95f7b4813737b9e529b4b33b3e9928336</id>
<content type='text'>
The starfive-camss driver is no longer being worked upon for destaging,
as confirmed by the maintainer, so drop it.

Link: https://lore.kernel.org/all/ZQ0PR01MB13024A92926C415C187D2C18F29F2@ZQ0PR01MB1302.CHNPR01.prod.partner.outlook.cn/
Acked-by: Changhuang Liang &lt;changhuang.liang@starfivetech.com&gt;
Reviewed-by: Laurent Pinchart &lt;laurent.pinchart@ideasonboard.com&gt;
Signed-off-by: Jai Luthra &lt;jai.luthra@ideasonboard.com&gt;
Signed-off-by: Sakari Ailus &lt;sakari.ailus@linux.intel.com&gt;
Signed-off-by: Mauro Carvalho Chehab &lt;mchehab+huawei@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The starfive-camss driver is no longer being worked upon for destaging,
as confirmed by the maintainer, so drop it.

Link: https://lore.kernel.org/all/ZQ0PR01MB13024A92926C415C187D2C18F29F2@ZQ0PR01MB1302.CHNPR01.prod.partner.outlook.cn/
Acked-by: Changhuang Liang &lt;changhuang.liang@starfivetech.com&gt;
Reviewed-by: Laurent Pinchart &lt;laurent.pinchart@ideasonboard.com&gt;
Signed-off-by: Jai Luthra &lt;jai.luthra@ideasonboard.com&gt;
Signed-off-by: Sakari Ailus &lt;sakari.ailus@linux.intel.com&gt;
Signed-off-by: Mauro Carvalho Chehab &lt;mchehab+huawei@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Documentation: admin-guide: media: mgb4: Add GMSL1 &amp; GMSL3-coax modules info</title>
<updated>2026-01-17T08:08:02+00:00</updated>
<author>
<name>Martin Tůma</name>
<email>martin.tuma@digiteqautomotive.com</email>
</author>
<published>2026-01-16T12:55:55+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=eb4ee870747c3a77a9c3c84d84efb64bd481013a'/>
<id>eb4ee870747c3a77a9c3c84d84efb64bd481013a</id>
<content type='text'>
Add the mgb4 GMSL1 and GMSL3-coax modules info.

Signed-off-by: Martin Tůma &lt;martin.tuma@digiteqautomotive.com&gt;
Signed-off-by: Hans Verkuil &lt;hverkuil+cisco@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Add the mgb4 GMSL1 and GMSL3-coax modules info.

Signed-off-by: Martin Tůma &lt;martin.tuma@digiteqautomotive.com&gt;
Signed-off-by: Hans Verkuil &lt;hverkuil+cisco@kernel.org&gt;
</pre>
</div>
</content>
</entry>
</feed>
