Pull devicetree updates from Rob Herring:
 "DT core:

   - Sync dtc/libfdt with upstream v1.7.2-62-ga26ef6400bd8

   - Add a for_each_compatible_node_scoped() loop and convert users in
     cpufreq, dmaengine, clk, cdx, powerpc and Arm

   - Simplify of/platform.c with scoped loop helpers

   - Add fw_devlink tracking for "mmc-pwrseq"

   - Optimize fw_devlink callback code size for pinctrl-N properties

   - Replace strcmp_suffix() with strends()

  DT bindings:

   - Support building single binding targets

   - Convert google,goldfish-fb, cznic,turris-mox-rwtm, ti,prm-inst

   - Add bindings for Freescale AVIC, Realtek RTD1xxx system
     controllers, Microchip 25AA010A EEPROM, OnSemi FIN3385, IEI
     WT61P803 PUZZLE, Delta Electronics DPS-800-AB power supply,
     Infineon IR35221 Digital Multi-phase Controller, Infineon PXE1610
     Digital Dual Output 6+1 VR12.5 & VR13 CPU Controller,
     socionext,uniphier-smpctrl, and xlnx,zynqmp-firmware

   - Lots of trivial binding fixes to address warnings in DTS files.
     These are mostly for arm64 platforms which is getting closer to be
     warning free. Some public shaming has helped.

   - Fix I2C bus node names in examples

   - Drop obsolete brcm,vulcan-soc binding

   - Drop unreferenced binding headers"

* tag 'devicetree-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (60 commits)
  dt-bindings: interrupt-controller: Add compatiblie string fsl,imx(1|25|27|31|35)-avic
  dt-bindings: soc: imx: add fsl,aips and fsl,emi compatible strings
  dt-bindings: display: bridge: lt8912b: Drop reset gpio requirement
  dt-bindings: firmware: fsl,scu: Mark multi-channel MU layouts as deprecated
  cpufreq: s5pv210: Simplify with scoped for each OF child loop
  dmaengine: fsl_raid: Simplify with scoped for each OF child loop
  clk: imx: imx31: Simplify with scoped for each OF child loop
  clk: imx: imx27: Simplify with scoped for each OF child loop
  cdx: Use mutex guard to simplify error handling
  cdx: Simplify with scoped for each OF child loop
  powerpc/wii: Simplify with scoped for each OF child loop
  powerpc/fsp2: Simplify with scoped for each OF child loop
  ARM: exynos: Simplify with scoped for each OF child loop
  ARM: at91: Simplify with scoped for each OF child loop
  of: Add for_each_compatible_node_scoped() helper
  dt-bindings: Fix emails with spaces or missing brackets
  scripts/dtc: Update to upstream version v1.7.2-62-ga26ef6400bd8
  dt-bindings: crypto: inside-secure,safexcel: Mandate only ring IRQs
  dt-bindings: crypto: inside-secure,safexcel: Add SoC compatibles
  of: reserved_mem: Fix placement of __free() annotation
  ...

Drop the gpio reset from the list of required properties. The bridge works
fine with a reset not managed by Linux. In the driver itself the gpio is
already flagged as optional.

Signed-off-by: Dominik Haller <d.haller@phytec.de>
Link: https://patch.msgid.link/20260130205820.83189-6-d.haller@phytec.de
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>

Add compatible string for OnSemi FIN3385, a FlatLink LVDS transmitter.

Signed-off-by: Marek Vasut <marex@nabladev.com>
Link: https://patch.msgid.link/20260121085347.10368-2-marex@nabladev.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>

Some TDA998x variants (e.g. TDA19988) have an OSC_IN pin, to connect
an external oscillator circuit or clock source.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/2b66577296583a6787f770f0eb13c42a6b50768b.1768233569.git.geert+renesas@glider.be
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>

Current binding document enforces presence of either port@0 (DSI in) or
port@1 (DPI IN/OUT), with port@2 (DP out) being optional. This bridge is
capable of DSI->DP, DPI->DP and DPI->DP, it is therefore perfectly valid
to have both port@0 and port@1 described in the DT, because this is fairy
standard DPI->DP configuration of this bridge. Replace oneOf with anyOf
to cover this configuration.

Signed-off-by: Marek Vasut <marex@nabladev.com>
Link: https://patch.msgid.link/20260107213546.505137-1-marex@nabladev.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>

Make "reg" property mandatory for all LDB devices and "reg-names"
mandatory for i.MX8MP and i.MX93 which have two "reg" values. The
i.MX6SX has only one "reg" value so the "reg-names" property there
is optional and not needed.

Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Link: https://patch.msgid.link/20260106012236.295834-1-marek.vasut@mailbox.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>

The Algoltek AG6311 is a transparent DisplayPort to HDMI bridge.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Val Packett <val@packett.cool>
Link: https://patch.msgid.link/20260120234029.419825-7-val@packett.cool
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>

Add the compatible string "renesas,r9a09g057-mipi-dsi" for the Renesas
RZ/V2H(P) (R9A09G057) SoC. While the MIPI DSI LINK registers are shared
with the RZ/G2L SoC, the D-PHY register layout differs. Additionally, the
RZ/V2H(P) uses only two resets compared to three on RZ/G2L, and requires
five clocks instead of six.

To reflect these hardware differences, update the binding schema to
support the reduced clock and reset requirements for RZ/V2H(P).

Since the RZ/V2N (R9A09G056) SoC integrates an identical DSI IP to
RZ/V2H(P), the same "renesas,r9a09g057-mipi-dsi" compatible string is
reused for RZ/V2N.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20251015192611.241920-6-prabhakar.mahadev-lad.rj@bp.renesas.com

Pull devicetree updates from Rob Herring:
 "DT bindings:

   - Convert lattice,ice40-fpga-mgr, apm,xgene-storm-dma,
     brcm,sr-thermal, amazon,al-thermal, brcm,ocotp, mt8173-mdp, Actions
     Owl SPS, Marvell AP80x System Controller, Marvell CP110 System
     Controller, cznic,moxtet, and apm,xgene-slimpro-mbox to DT schema
     format

   - Add i.MX95 fsl,irqsteer, MT8365 Mali Bifrost GPU, Anvo ANV32C81W
     EEPROM, and Microchip pic64gx PLIC

   - Add missing LGE, AMD Seattle, and APM X-Gene SoC platform
     compatibles

   - Updates to brcm,bcm2836-l1-intc, brcm,bcm2835-hvs, and bcm2711-hdmi
     bindings to fix warnings on BCM2712 platforms

   - Drop obsolete db8500-thermal.txt

   - Treewide clean-up of extra blank lines and inconsistent quoting

   - Ensure all .dtbo targets are applied to a base .dtb

   - Speed up dt_binding_check by skipping running validation on empty
     examples

  DT core:

   - Add of_machine_device_match() and of_machine_get_match_data()
     helpers and convert users treewide

   - Fix bounds checking of address properties in FDT code. Rework the
     code to have a single implementation of the bounds checks.

   - Rework of_irq_init() to ignore any implicit interrupt-parent (i.e.
     in a parent node) on nodes without an interrupt. This matches the
     spec description and fixes some RISC-V platforms.

   - Avoid a spurious message on overlay removal

   - Skip DT kunit tests on RISCV+ACPI"

* tag 'devicetree-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (55 commits)
  dt-bindings: kbuild: Skip validating empty examples
  dt-bindings: interrupt-controller: brcm,bcm2836-l1-intc: Drop interrupt-controller requirement
  dt-bindings: display: Fix brcm,bcm2835-hvs bindings for BCM2712
  dt-bindings: display: bcm2711-hdmi: Add interrupt details for BCM2712
  of: Skip devicetree kunit tests when RISCV+ACPI doesn't populate root node
  soc: tegra: Simplify with of_machine_device_match()
  soc: qcom: ubwc: Simplify with of_machine_get_match_data()
  powercap: dtpm: Simplify with of_machine_get_match_data()
  platform: surface: Simplify with of_machine_get_match_data()
  irqchip/atmel-aic: Simplify with of_machine_get_match_data()
  firmware: qcom: scm: Simplify with of_machine_device_match()
  cpuidle: big_little: Simplify with of_machine_device_match()
  cpufreq: sun50i: Simplify with of_machine_device_match()
  cpufreq: mediatek: Simplify with of_machine_get_match_data()
  cpufreq: dt-platdev: Simplify with of_machine_get_match_data()
  of: Add wrappers to match root node with OF device ID tables
  dt-bindings: eeprom: at25: Add Anvo ANV32C81W
  of/reserved_mem: Simplify the logic of __reserved_mem_alloc_size()
  of/reserved_mem: Simplify the logic of fdt_scan_reserved_mem_reg_nodes()
  of/reserved_mem: Simplify the logic of __reserved_mem_reserve_reg()
  ...

The ASL CS5263 is a high-performance DP1.4 to HDMI2.0b converter,
designed to connect a DP1.4 source to an HDMI2.0b sink. The CS5263AN
integrates a DP1.4 compliant receiver, and a HDMI2.0b compliant
transmitter.

Signed-off-by: Ettore Chimenti <ettore.chimenti@linaro.org>
Signed-off-by: Georg Gottleuber <ggo@tuxedocomputers.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251121142623.251118-3-ggo@tuxedocomputers.com