Extend the existing Tegra186 GPIO controller device tree bindings with
support for the GPIO controllers found on Tegra238. Tegra238 has two
GPIO controllers: the main controller and always-on (AON) controller.
The number of pins is slightly different, but the programming model
remains the same.

Add a new header, include/dt-bindings/gpio/nvidia,tegra238-gpio.h,
that defines port IDs as well as the TEGRA238_MAIN_GPIO() helper,
both of which are used in conjunction to create a unique specifier
for each pin.

Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260514124835.108532-1-pshete@nvidia.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>

EIO (Extended IO) GPIO is a Xilinx IP block that exposes
multiplexed I/O pins through an EIO interface.

The EIO GPIO block has 2 banks with 26 GPIOs each (52 total).
The GPIO width cannot be determined from the hardware registers,
the driver relies on the compatible string to select the correct
bank/pin configuration. A new compatible is therefore required.

The block is currently present on xa2ve3288 silicon.
The compatible string uses version 1.0 matching the IP core version.

Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Link: https://patch.msgid.link/20260512060917.2096456-3-shubhrajyoti.datta@amd.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>

Sort the compatible string alphabetically.

Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Link: https://patch.msgid.link/20260512060917.2096456-2-shubhrajyoti.datta@amd.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>

GPIO hogs are described in the gpio.txt binding as automatic default
GPIO configuration items.

Allow them for GPIO ports in DesignWare APB GPIO controller nodes.

Cc: Hoan Tran <hoan@os.amperecomputing.com>
Cc: Linus Walleij <linusw@kernel.org>
Cc: Bartosz Golaszewski <brgl@kernel.org>
Cc: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Icenowy Zheng <zhengxingda@iscas.ac.cn>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260507081710.4090814-8-zhengxingda@iscas.ac.cn
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>

The Waveshare DSI TOUCH family of panels has separate on-board GPIO
controller, which controls power supplies to the panel and the touch
screen and provides reset pins for both the panel and the touchscreen.
Also it provides a simple PWM controller for panel backlight.

Add bindings for these GPIO controllers. As overall integration might be
not very obvious (and it differs significantly from the bindings used by
the original drivers), provide complete example with the on-board
regulators and the DSI panel.

Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260507-waveshare-dsi-touch-v5-1-d2ac7ccc22d4@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>

The 74HC595 and 74LVC594 shift registers latch their outputs until the
first serial write, so boards that depend on a specific power-on pattern
(for example active-low indicators, reset lines, or other signals that
must come up non-zero) have no way to express that today: the Linux
driver always writes zeros from its zero-initialised buffer during
probe.

Document support for the existing lines-initial-states bitmask, already
defined for nxp,pcf8575, so the same convention covers this output-only
device. Bit N corresponds to GPIO line N. Because the 74HC595/74LVC594
family is push-pull output only (no input mode, no high-impedance state
under software control), bit=0 drives the line low and bit=1 drives it
high; this differs from nxp,pcf8575, where the 0/1 polarity reflects the
quasi-bidirectional nature of that part.

The bitmask covers up to 32 lines, which fits the typical 1-4 chip
cascades that appear in tree. Should longer chains require seeding in
the future, the property can be extended to a uint32-array without
breaking the bit-N-equals-line-N convention.

Suggested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Chanhong Jung <happycpu@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260429035134.1023330-2-happycpu@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>

Pull MFD updates from Lee Jones:
 "Core:
   - Add a resource-managed version of alloc_workqueue()
     (`devm_alloc_workqueue()`)
   - Preserve the Open Firmware (OF) node when an ACPI handle
     is present

  Apple SMC:
   - Wire up the Apple SMC power driver by adding a new MFD cell

  Atmel HLCDC:
   - Fetch the LVDS PLL clock as a fallback if the generic sys_clk
     is unavailable

  Broadcom BCM2835 PM:
   - Add support for the BCM2712 power management device
   - Introduce a hardware type identifier to distinguish SoC variants

  Congatec CGBC, KEMPLD, RSMU, Si476x:
   - Fix various kernel-doc warnings and correct struct member names

  DLN2:
   - Drop redundant USB device references and switch to managed
     resource allocations
   - Update bare 'unsigned' types to 'unsigned int'

  ENE KB3930:
   - Use the of_device_is_system_power_controller() wrapper

  EZX PCAP:
   - Avoid rescheduling after destroying the workqueue by switching
     to a device-managed workqueue
   - Drop redundant memory allocation error messages
   - Return directly instead of using empty goto statements

  Freescale i.MX25 TSADC:
   - Convert devicetree bindings from TXT to YAML format

  Freescale MC13xxx:
   - Fix a memory leak in subdevice platform data allocation by
     using devm_kmemdup()

  Intel LPC ICH:
   - Expose a software node for the GPIO controller cell to fix
     GPIO lookups

  Intel LPSS:
   - Add PCI IDs for the Intel Nova Lake-H platform

  Maxim MAX77620:
   - Convert devicetree bindings from TXT to YAML format
   - Document an optional I2C address for the MAX77663 RTC device

  Maxim MAX77705:
   - Make the max77705_pm_ops variable static to resolve a
     sparse warning

  MediaTek MT6397:
   - Correct the hardware CIDs for the MT6328, MT6331, and MT6332
     PMICs to allow proper driver binding

  ROHM BD71828:
   - Enable system wakeup via the power button

  ROHM BD72720:
   - Add a new compatible string for the ROHM BD73900 PMIC

  SpacemiT P1:
   - Drop the deprecated "vin-supply" property from the devicetree
     bindings
   - Add individual regulator supply properties to match actual
     hardware topology

  STMicroelectronics STPMIC1:
   - Attempt system shutdown a second time to handle transient I2C
     communication failures

  Viperboard:
   - Drop redundant USB device references"

* tag 'mfd-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (28 commits)
  mfd: core: Preserve OF node when ACPI handle is present
  mfd: ene-kb3930: Use of_device_is_system_power_controller() wrapper
  mfd: intel-lpss: Add Intel Nova Lake-H PCI IDs
  dt-bindings: mfd: max77620: Document optional RTC address for MAX77663
  dt-bindings: mfd: max77620: Convert to DT schema
  mfd: ezx-pcap: Avoid rescheduling after destroying workqueue
  mfd: ezx-pcap: Return directly instead of empty gotos
  mfd: ezx-pcap: Drop memory allocation error message
  mfd: bcm2835-pm: Add BCM2712 PM device support
  mfd: bcm2835-pm: Introduce SoC-specific type identifier
  dt-bindings: mfd: bd72720: Add ROHM BD73900
  mfd: si476x: Fix kernel-doc warnings
  mfd: rsmu: Remove a empty kernel-doc line
  mfd: kempld: Fix kernel-doc struct member names
  mfd: congatec: Fix kernel-doc struct member names
  dt-bindings: mfd: Convert fsl-imx25-tsadc.txt to yaml format
  mfd: viperboard: Drop redundant device reference
  mfd: dln2: Switch to managed resources and fix bare unsigned types
  mfd: macsmc: Wire up Apple SMC power driver
  mfd: mt6397: Properly fix CID of MT6328, MT6331 and MT6332
  ...

Pull gpio updates from Bartosz Golaszewski:
 "For this merge window we have two new drivers: support for
  GPIO-signalled ACPI events on Intel platforms and a generic
  GPIO-over-pinctrl driver using the ARM SCMI protocol for
  controlling pins.

  Several things have been reworked in GPIO core: we unduplicated GPIO
  hog handling, reduced the number of SRCU locks and dereferences,
  improved support for software-node-based lookup and removed more
  legacy code after converting remaining users to modern alternatives.

  There's also a number of driver reworks and refactoring, documentation
  updates, some bug-fixes and new tests.

  GPIO core:
   - defer probe on software node lookups when the remote software node
     exists but has not been registered as a firmware node yet
   - unify GPIO hog handling by moving code duplicated in OF and ACPI
     modules into GPIO core and allow setting up hogs with software
     nodes
   - allow matching GPIO controllers by secondary firmware node if
     matching by primary does not succeed
   - demote deferral warnings to debug level as they are quite normal
     when using software nodes which don't support fw_devlink yet
   - disable the legacy GPIO character device uAPI v1 supprt in Kconfig
     by default
   - rework several core functions in preparation for the upcoming
     Revocable helper library for protecting resources against sudden
     removal, this reduces the number of SRCU dereferences in GPIO core
   - simplify file descriptor logic in GPIO character device code by
     using FD_PREPARE()
   - introduce a header defining symbols used by both GPIO consumers and
     providers to avoid having to include provider-specific headers from
     drivers which only consume GPIOs
   - replace snprintf() with strscpy() where formatting is not required

  New drivers:
   - add the gpio-by-pinctrl generic driver using the ARM SCMI protocol
     to control GPIOs (along with SCMI changes pulled from the pinctrl
     tree)
   - add a driver providing support for handling of platform events via
     GPIO-signalled ACPI events (used on Intel Nova Lake and later
     platforms)

  Driver changes:
   - extend the gpio-kempld driver with support for more recent models,
     interrupts and setting/getting multiple values at once
   - improve interrupt handling in gpio-brcmstb
   - add support for multi-SoC systems in gpio-tegra186
   - make sure we return correct values from the .get() callbacks in
     several GPIO drivers by normalizing any values other than 0, 1 or
     negative error numbers
   - use flexible arrays in several drivers to reduce the number of
     required memory allocations
   - simplify synchronous waiting for virtual drivers to probe and
     remove the dedicated, a bit overengineered helper library
     dev-sync-probe
   - remove unneeded Kconfig dependencies on OF_GPIO in several drivers
     and subsystems
   - convert the two remaining users of of_get_named_gpio() to using
     GPIO descriptors and remove the (no longer used) function along
     with the header that declares it
   - add missing includes in gpio-mmio
   - shrink and simplify code in gpio-max732x by using guard(mutex)
   - remove duplicated code handling the 'ngpios' property from
     gpio-ts4800, it's already handled in GPIO core
   - use correct variable type in gpio-aspeed
   - add support for a new model in gpio-realtek-otto
   - allow to specify the active-low setting of simulated hogs over the
     configfs interface (in addition to existing devicetree support) in
     gpio-sim

  Bug fixes:
   - clear the OF_POPULATED flag on hog nodes in GPIO chip remove path
     on OF systems
   - fix resource leaks in error path in gpiochip_add_data_with_key()
   - drop redundant device reference in gpio-mpsse

  Tests:
   - add selftests for use-after-free cases in GPIO character device
     code

  DT bindings:
   - add a DT binding document for SCMI based, gpio-over-pinctrl devices
   - fix interrupt description in microchip,mpfs-gpio
   - add new compatible for gpio-realtek-otto
   - describe the resets of the mpfs-gpio controller
   - fix maintainer's email in gpio-delay bindings
   - remove the binding document for cavium,thunder-8890 as the
     corresponding device is bound over PCI and not firmware nodes

  Documentation:
   - update the recommended way of converting legacy boards to using
     software nodes for GPIO description
   - describe GPIO line value semantics
   - misc updates to kerneldocs

  Misc:
   - convert OMAP1 ams-delta board to using GPIO hogs described with
     software nodes"

* tag 'gpio-updates-for-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (79 commits)
  gpio: swnode: defer probe on references to unregistered software nodes
  dt-bindings: gpio: cavium,thunder-8890: Remove DT binding
  Documentation: gpio: update the preferred method for using software node lookup
  gpio: gpio-by-pinctrl: s/used to do/is used to do/
  gpio: aspeed: fix unsigned long int declaration
  gpio: rockchip: convert to dynamic GPIO base allocation
  gpio: remove dev-sync-probe
  gpio: virtuser: stop using dev-sync-probe
  gpio: aggregator: stop using dev-sync-probe
  gpio: sim: stop using dev-sync-probe
  gpio: Add Intel Nova Lake ACPI GPIO events driver
  gpiolib: Make deferral warnings debug messages
  gpiolib: fix hogs with multiple lines
  gpio: fix up CONFIG_OF dependencies
  gpio: gpio-by-pinctrl: add pinctrl based generic GPIO driver
  gpio: dt-bindings: Add GPIO on top of generic pin control
  firmware: arm_scmi: Allow PINCTRL_REQUEST to return EOPNOTSUPP
  pinctrl: scmi: ignore PIN_CONFIG_PERSIST_STATE
  pinctrl: scmi: Delete PIN_CONFIG_OUTPUT_IMPEDANCE_OHMS support
  pinctrl: scmi: Add SCMI_PIN_INPUT_VALUE
  ...

Remove the cavium,thunder-8890 GPIO binding as there are no active
use cases. The binding is unused as the corresponding kernel driver
binds via PCI and not the compatible.

Signed-off-by: Shi Hao <i.shihao.999@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260408093313.17025-1-i.shihao.999@gmail.com
[Bartosz: tweaked the commit message]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>

The GPIO controller on PolarFire SoC supports more than one type of
interrupt and needs two interrupt cells.

Fixes: 735806d8a68e9 ("dt-bindings: gpio: add bindings for microchip mpfs gpio")
Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260326-wise-gumdrop-49217723a72a@spud
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>