linux-toradex.git/Documentation/devicetree/bindings/i2c, branch v4.4.78 Linux kernel for Apalis and Colibri modules Merge branch 'i2c/for-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux 2015-11-10T19:58:25+00:00 Linus Torvalds torvalds@linux-foundation.org 2015-11-10T19:58:25+00:00 d55fc37856244c929965c190c8e9dcb49e2c07aa Pull i2c updates from Wolfram Sang: - New drivers: UniPhier (with and without FIFO) - some drivers got some bigger rework: ismt, designware, img-scb (rcar had to be reverted because issues were showing up just lately) - ACPI: reworked the device scanning and added support for muxes ... and quite a lot of driver bugfixes and cleanups this time. All files touched outside of the i2c realm have proper acks. * 'i2c/for-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (70 commits) i2c: rcar: Revert the latest refactoring series i2c: pnx: remove superfluous assignment MAINTAINERS: i2c: drop i2c-pnx maintainer MAINTAINERS: i2c: mark also subdirectories as maintained i2c: cadence: enable driver for ARM64 i2c: i801: Document Intel DNV and Broxton i2c: at91: manage unexpected RXRDY flag when starting a transfer i2c: pnx: Use setup_timer instead of open coding it i2c: add ACPI support for I2C mux ports acpi: add acpi_preset_companion() stub i2c: pxa: Add support for pxa910/988 & new configuration features i2c: au1550: Convert to devm_kzalloc and devm_ioremap_resource i2c-dev: Fix I2C_SLAVE ioctl comment i2c-dev: Fix typo in ioctl name reference i2c: sirf: tune the divider to make i2c bus freq more accurate i2c: imx: Use -ENXIO as error in the NACK case i2c: i801: Add support for Intel Broxton i2c: i801: Add support for Intel DNV i2c: mediatek: add i2c resume support i2c: imx: implement bus recovery ... 
Pull i2c updates from Wolfram Sang:

 - New drivers: UniPhier (with and without FIFO)

 - some drivers got some bigger rework: ismt, designware, img-scb (rcar
   had to be reverted because issues were showing up just lately)

 - ACPI: reworked the device scanning and added support for muxes

... and quite a lot of driver bugfixes and cleanups this time.  All
files touched outside of the i2c realm have proper acks.

* 'i2c/for-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (70 commits)
  i2c: rcar: Revert the latest refactoring series
  i2c: pnx: remove superfluous assignment
  MAINTAINERS: i2c: drop i2c-pnx maintainer
  MAINTAINERS: i2c: mark also subdirectories as maintained
  i2c: cadence: enable driver for ARM64
  i2c: i801: Document Intel DNV and Broxton
  i2c: at91: manage unexpected RXRDY flag when starting a transfer
  i2c: pnx: Use setup_timer instead of open coding it
  i2c: add ACPI support for I2C mux ports
  acpi: add acpi_preset_companion() stub
  i2c: pxa: Add support for pxa910/988 & new configuration features
  i2c: au1550: Convert to devm_kzalloc and devm_ioremap_resource
  i2c-dev: Fix I2C_SLAVE ioctl comment
  i2c-dev: Fix typo in ioctl name reference
  i2c: sirf: tune the divider to make i2c bus freq more accurate
  i2c: imx: Use -ENXIO as error in the NACK case
  i2c: i801: Add support for Intel Broxton
  i2c: i801: Add support for Intel DNV
  i2c: mediatek: add i2c resume support
  i2c: imx: implement bus recovery
  ...
i2c: imx: implement bus recovery 2015-10-23T19:55:50+00:00 Gao Pan b54642@freescale.com 2015-10-23T12:28:54+00:00 1c4b6c3bcf30d0804db0d0647d8ebeb862c6f7e5 Implement bus recovery methods for i2c-imx so we can recover from situations where SCL/SDA are stuck low. Once i2c bus SCL/SDA are stuck low during transfer, config the i2c pinctrl to gpio mode by calling pinctrl sleep set function, and then use GPIO to emulate the i2c protocol to send nine dummy clock to recover i2c device. After recovery, set i2c pinctrl to default group setting. Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Gao Pan <b54642@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> 
Implement bus recovery methods for i2c-imx so we can recover from
situations where SCL/SDA are stuck low.

Once i2c bus SCL/SDA are stuck low during transfer, config the i2c
pinctrl to gpio mode by calling pinctrl sleep set function, and then
use GPIO to emulate the i2c protocol to send nine dummy clock to recover
i2c device. After recovery, set i2c pinctrl to default group setting.

Signed-off-by: Fugang Duan <B38611@freescale.com>
Signed-off-by: Gao Pan <b54642@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
i2c: uniphier_f: add UniPhier FIFO-builtin I2C driver 2015-10-23T19:55:46+00:00 Masahiro Yamada yamada.masahiro@socionext.com 2015-10-23T10:52:00+00:00 6a62974b667f3976ec44e255bed31746cca1ff51 Add support for on-chip I2C controller used on newer UniPhier SoCs such as PH1-Pro4, PH1-Pro5, etc. This adapter is equipped with 8-depth TX/RX FIFOs. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> 
Add support for on-chip I2C controller used on newer UniPhier SoCs
such as PH1-Pro4, PH1-Pro5, etc.  This adapter is equipped with
8-depth TX/RX FIFOs.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
i2c: uniphier: add UniPhier FIFO-less I2C driver 2015-10-23T19:55:45+00:00 Masahiro Yamada yamada.masahiro@socionext.com 2015-10-23T10:51:59+00:00 dd6fd4a3279310bac214867e31848f47e13caa6f Add support for on-chip I2C controller used on old UniPhier SoCs such as PH1-LD4, PH1-sLD8, etc. This adapter is so simple that it has no FIFO in it. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> 
Add support for on-chip I2C controller used on old UniPhier SoCs
such as PH1-LD4, PH1-sLD8, etc.  This adapter is so simple that
it has no FIFO in it.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
i2c: sh_mobile: add support for r8a7795 (R-Car H3) 2015-10-20T16:10:20+00:00 Wolfram Sang wsa+renesas@sang-engineering.com 2015-08-05T13:18:26+00:00 7bb6da5a3d2dae725ed228a97dd65f82e3fbd934 Enable the I2C core for this SoC. It is compitable to Gen2 SoCs, so reuse the settings. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> 
Enable the I2C core for this SoC. It is compitable to Gen2 SoCs, so
reuse the settings.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
i2c: rcar: add support for r8a7795 (R-Car H3) 2015-10-20T16:03:07+00:00 Wolfram Sang wsa+renesas@sang-engineering.com 2015-08-05T13:18:25+00:00 e7db0d34b38d56bbdb3d2d64c6233c53b77a3c6c Enable the I2C core for this SoC. I add a new type because this version has new features (e.g. DMA) which will be added somewhen later. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> 
Enable the I2C core for this SoC. I add a new type because this version
has new features (e.g. DMA) which will be added somewhen later.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
i2c: davinci: Optimize clock generation on Keystone SoC 2015-10-20T15:05:16+00:00 Alexander Sverdlin alexander.sverdlin@nokia.com 2015-09-14T09:03:50+00:00 35780e860f7d4a5f33f6ceadf09038ee26f1ef43 According to "KeyStone Architecture Inter-IC Control Bus User Guide", fixed additive part of frequency divisors (referred as "d" in the code and datasheet) always equals to 6, independent of module clock prescaler. module clock frequency master clock frequency = ---------------------- (ICCL + 6) + (ICCH + 6) It was not the case with original Davinci IP. Introduce new compatible property "ti,keystone-i2c", which triggers special handling in the driver. Without this change Keystone-based systems (having 204.8MHz input clock) choose prescaler 29 (PSC=28). Using d=5 in this case leads to bus bitrate ~353kHz instead of requested 400kHz. After correction, assuming d=6 bus rate is ~392kHz. This gives ~11% transfer rate increase. Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Tested-by: Hemanth Guruva Reddy <hemanth.guruva_reddy@nokia.com> Tested-by: Lukasz Gemborowski <lukasz.gemborowski@nokia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> 
According to "KeyStone Architecture Inter-IC Control Bus User Guide", fixed
additive part of frequency divisors (referred as "d" in the code and datasheet)
always equals to 6, independent of module clock prescaler.

                         module clock frequency
master clock frequency = ----------------------
                         (ICCL + 6) + (ICCH + 6)

It was not the case with original Davinci IP. Introduce new compatible property
"ti,keystone-i2c", which triggers special handling in the driver.

Without this change Keystone-based systems (having 204.8MHz input clock) choose
prescaler 29 (PSC=28). Using d=5 in this case leads to bus bitrate ~353kHz
instead of requested 400kHz. After correction, assuming d=6 bus rate is ~392kHz.
This gives ~11% transfer rate increase.

Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Hemanth Guruva Reddy <hemanth.guruva_reddy@nokia.com>
Tested-by: Lukasz Gemborowski <lukasz.gemborowski@nokia.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Merge tag 'iio-for-4.4a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next 2015-09-30T01:37:48+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2015-09-30T01:37:48+00:00 9f827d8099e76a4a2fb99faa88ee7859459f2360 Jonathan writes: First round of new driver, new functionality and cleanups for IIO in the 4.4 cycle New device support * APDS9960 ALS + proximity driver * bmg160 SPI devices. * HDC100x humidity sensors * Holt HI-8435 threshold detector * mma8453Q accelerometer added to the mma8452 driver * mma86452FC and mma8653FC accelerometers added to the mma8452 driver * mxc4005 accelerometer * PulsedLight LIDAR * SensorTech VZ89x volatile organic compound sensor * UPISEMI uS5182d ALS and proximity sensors New core functionality * triggered events - use triggers to check for changes in threshold type detectors on devices with out interrupt support. First user is the holt comparator. * chemical concentration and resistance channel types. New driver functionality * vf610 - buffer support. - followup coccinelle warning fix. Core rework * buffers - break out callback buffer to own module. - move buffer implementations to a new subdirectory * percolate the error code form iio_event_getfd out to userspace rather than giving a missleading error later on. Cleanups * adddac drivers - use BIT macro where appropriate. * meter drivers - use BIT macro where appropriate. * ad7303 - add an OF match table to line up with the binding docs. * adc128s052 - add an OF match table to line up with the binding docs. * adf4350 - add an OF match table to line up with the binding docs * as3935 - add an OF match table to line up with the binding docs. * berlin2-adc - use GENMASK and BIT for masks - prevent attempting to sample multiple channels at once by moving a mutex scop - coding style cleanups * bmg150_magn - kconfig sort order was wrong - fix it. * bmg160 - use i2c regmap and drop all uses of i2c_client - separate i2c and core driver * cc10001_adc - kconfig sort order was wrong - fix it. * evgen (dummy driver helper module) - move interrupt generation to irq_work to reduce differences between the dummy driver and real hardware drivers. * hmc5843 - set the name dynamically rather than to a fixed value for one of the suported parts. - export module alias information to allow autoprobing of module. * lpc32xx - on failure to get resource or irq return -ENXIO as uppose to -EBUSY * max1027 - set .of_match_table to actually allow OF style matching. * max5821 - add MODULE_DEVICE_TABLE for OF table. * mma8452 - refactor to separate out chip specific data. - add freefall / motion interrupt source for devices that do their interrupts slightly differently. - update copywrite notice. - leave naming of events directory in sysfs to the core * mcp320x - set .of_match_table so that it can be use for OF style matching. * mlx90614 - Implement filter configuration (note the datasheet changed as a result of the driver reviews to include the values we needed ;) * opt3001 - drop .owner field as assigned by platform driver core. * si7020 - replace a bitmask on the humidity values with a more correct range check. * stk310 - improved error handling. - use BIT macro where appropriate and use the resulting defines instead of magic numbers in the code. - fix indentation * st-sensors - add debugfs register read hook * tsl4531 - fix error handling in check_id * twl6030 - fix module autoload for OF * iio-trig-sysfs - document add and remove attribute * trigger in staging - code alignment fixes. - braces on both branches of if statement if needed for one. * xilinx-xadc - push interrupts into hardirq context as there isn't much in them any more and it avoids breaking PREEMPT_RT builds due to the use of a spinlock between the hardirq and the thread. Tools * event-monitor - report unsupported events. We keep expanding what can come from drivers so give a helpful error if one turns up in an out of date userspace program. * generic-buffer - helpful message about needing to enable a channel to start the buffer. 
Jonathan writes:

First round of new driver, new functionality and cleanups for IIO in the 4.4 cycle

New device support
* APDS9960 ALS + proximity driver
* bmg160 SPI devices.
* HDC100x humidity sensors
* Holt HI-8435 threshold detector
* mma8453Q accelerometer added to the mma8452 driver
* mma86452FC and mma8653FC accelerometers added to the mma8452 driver
* mxc4005 accelerometer
* PulsedLight LIDAR
* SensorTech VZ89x volatile organic compound sensor
* UPISEMI uS5182d ALS and proximity sensors

New core functionality
* triggered events - use triggers to check for changes in threshold type
  detectors on devices with out interrupt support.  First user is the holt
  comparator.
* chemical concentration and resistance channel types.

New driver functionality
* vf610
  - buffer support.
  - followup coccinelle warning fix.

Core rework
* buffers
  - break out callback buffer to own module.
  - move buffer implementations to a new subdirectory
* percolate the error code form iio_event_getfd out to userspace
  rather than giving a missleading error later on.

Cleanups
* adddac drivers
  - use BIT macro where appropriate.
* meter drivers
  - use BIT macro where appropriate.

* ad7303
 - add an OF match table to line up with the binding docs.
* adc128s052
  - add an OF match table to line up with the binding docs.
* adf4350
  - add an OF match table to line up with the binding docs
* as3935
  - add an OF match table to line up with the binding docs.
* berlin2-adc
  - use GENMASK and BIT for masks
  - prevent attempting to sample multiple channels at once by moving a
    mutex scop
  - coding style cleanups
* bmg150_magn
  - kconfig sort order was wrong - fix it.
* bmg160
  - use i2c regmap and drop all uses of i2c_client
  - separate i2c and core driver
* cc10001_adc
  - kconfig sort order was wrong - fix it.
* evgen (dummy driver helper module)
  - move interrupt generation to irq_work to reduce differences between
    the dummy driver and real hardware drivers.
* hmc5843
  - set the name dynamically rather than to a fixed value for one of the
    suported parts.
  - export module alias information to allow autoprobing of module.
* lpc32xx
  - on failure to get resource or irq return -ENXIO as uppose to -EBUSY
* max1027
  - set .of_match_table to actually allow OF style matching.
* max5821
  - add MODULE_DEVICE_TABLE for OF table.
* mma8452
  - refactor to separate out chip specific data.
  - add freefall / motion interrupt source for devices that do their
    interrupts slightly differently.
  - update copywrite notice.
  - leave naming of events directory in sysfs to the core
* mcp320x
  - set .of_match_table so that it can be use for OF style matching.
* mlx90614
  - Implement filter configuration (note the datasheet changed as a result
    of the driver reviews to include the values we needed ;)
* opt3001
  - drop .owner field as assigned by platform driver core.
* si7020
  - replace a bitmask on the humidity values with a more correct range
    check.
* stk310
  - improved error handling.
  - use BIT macro where appropriate and use the resulting defines
    instead of magic numbers in the code.
  - fix indentation
* st-sensors
  - add debugfs register read hook
* tsl4531
  - fix error handling in check_id
* twl6030
  - fix module autoload for OF
* iio-trig-sysfs
  - document add and remove attribute
* trigger in staging
  - code alignment fixes.
  - braces on both branches of if statement if needed for one.
* xilinx-xadc
  - push interrupts into hardirq context as there isn't much in them
    any more and it avoids breaking PREEMPT_RT builds due to the use
    of a spinlock between the hardirq and the thread.

Tools
* event-monitor
  - report unsupported events.  We keep expanding what can come from drivers
    so give a helpful error if one turns up in an out of date userspace
    program.
* generic-buffer
  - helpful message about needing to enable a channel to start the buffer.
iio: chemical: add SGX VZ89x VOC sensor support 2015-09-23T19:23:26+00:00 Matt Ranostay mranostay@gmail.com 2015-09-14T03:26:14+00:00 cd8d97774f23c601d0ed66b5035bcc77dd665b10 Add support for VZ89X sensors VOC and CO2 reporting channels in percentage which can be converted to part per million. Signed-off-by: Matt Ranostay <mranostay@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> 
Add support for VZ89X sensors VOC and CO2 reporting channels in
percentage which can be converted to part per million.

Signed-off-by: Matt Ranostay <mranostay@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
iio: mma8452: add support for MMA8453Q accelerometer chip 2015-09-23T19:23:21+00:00 Martin Kepplinger martink@posteo.de 2015-09-01T11:45:09+00:00 c5ea1b58e8f51d8cd72e46cc398742988a614054 This adds support for the 10 bit version if Freescale's accelerometers of this series. The datasheet is available at Freescale's website: http://cache.freescale.com/files/sensors/doc/data_sheet/MMA8453Q.pdf It creates a devicetree bindings file to document the new functionality and removes the driver from the trivial-devices list. Signed-off-by: Martin Kepplinger <martin.kepplinger@theobroma-systems.com> Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> 
This adds support for the 10 bit version if Freescale's accelerometers
of this series. The datasheet is available at Freescale's website:

http://cache.freescale.com/files/sensors/doc/data_sheet/MMA8453Q.pdf

It creates a devicetree bindings file to document the new functionality
and removes the driver from the trivial-devices list.

Signed-off-by: Martin Kepplinger <martin.kepplinger@theobroma-systems.com>
Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>