Pull i3c updates from Alexandre Belloni:
 "There are now more fixes because as stated in my previous pull
  request, people now have access to actual hardware.

  Core:

   - handle IBI in the proper order

  Drivers:

   - cdns: fix status register access

   - mipi-i3c-hci: many fixes now that the driver has been actually
     tested

   - svc: many IBI fixes, correct compatible string, fix hot join corner
     cases"

* tag 'i3c/for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (29 commits)
  i3c: master: handle IBIs in order they came
  i3c: master: mipi-i3c-hci: Fix a kernel panic for accessing DAT_data.
  i3c: master: svc: fix compatibility string mismatch with binding doc
  i3c: master: svc: fix random hot join failure since timeout error
  i3c: master: svc: fix SDA keep low when polling IBIWON timeout happen
  i3c: master: svc: fix check wrong status register in irq handler
  i3c: master: svc: fix ibi may not return mandatory data byte
  i3c: master: svc: fix wrong data return when IBI happen during start frame
  i3c: master: svc: fix race condition in ibi work thread
  i3c: Fix typo "Provisional ID" to "Provisioned ID"
  i3c: Fix potential refcount leak in i3c_master_register_new_i3c_devs
  i3c: mipi-i3c-hci: Resume controller after aborted transfer
  i3c: mipi-i3c-hci: Resume controller explicitly
  i3c: mipi-i3c-hci: Fix missing xfer->completion in hci_cmd_v1_daa()
  i3c: mipi-i3c-hci: Do not unmap region not mapped for transfer
  i3c: mipi-i3c-hci: Set number of SW enabled Ring Bundles earlier
  i3c: mipi-i3c-hci: Fix race between bus cleanup and interrupt
  i3c: mipi-i3c-hci: Set ring start request together with enable
  i3c: mipi-i3c-hci: Remove BUG() when Ring Abort request times out
  i3c: mipi-i3c-hci: Fix out of bounds access in hci_dma_irq_handler
  ...

This property is used to describe a I3C bus with attached MCTP I3C
target devices.

Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

The MIPI I3C spec refers to a Provisioned ID, since it is (sometimes)
provisioned at device manufacturing.

Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20231003075339.197099-1-matt@codeconstruct.com.au
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

Pull i3c updates from Alexandre Belloni:
 "Core:
   - Fix SETDASA when static and dynamic adress are equal
   - Fix cmd_v1 DAA exit criteria

  Drivers:
   - svc: allow probing without any device"

* tag 'i3c/for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
  i3c: master: svc: fix probe failure when no i3c device exist
  i3c: master: Fix SETDASA process
  dt-bindings: i3c: Fix description for assigned-address
  i3c: master: svc: Describe member 'saved_regs'
  i3c: master: svc: Do not check for 0 return after calling platform_get_irq()
  i3c/master: cmd_v1: Fix the exit criteria for the daa procedure
  i3c: Explicitly include correct DT includes

assigned-address is a valid property for I3C device with or without
static address. Fix the description and an example for the same.

Signed-off-by: Aniket <aniketmaurya@google.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230822051209.2837818-1-aniketmaurya@google.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

Cleanup bindings dropping the last remaining unneeded quotes. With this,
the check for this can be enabled in yamllint.

Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> # for mtd
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Wolfram Sang <wsa@kernel.org> # for AT24/I2C
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230823183749.2609013-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>

Pull devicetree updates from Rob Herring:
 "Bindings:

   - Add some missing type definitions to properties

   - Drop unneeded quotes and use absolute paths in bindings

   - Remove redundant "binding" or "schema" in binding titles

   - Add bindings for Ralink SoCs interrupt controller, QCA2066
     Bluetooth, infineon,irps5401, new NXP i.MX GPT variants, shineworld
     lh133k MIPI SPI panel, Socionext Synquacer platforms, RK3588 PCIe,
     ST M95640 EEPROM, and FSL DCP crypto variants, and Arm Cortex-R52

  DT core:

   - Improve the reserved-memory range allocation to maximize contiguous
     space

   - Use device_set_node() helper in place of open coding"

* tag 'devicetree-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (40 commits)
  dt-bindings: interrupt-controller: add Ralink SoCs interrupt controller
  dt-bindings: PCI: dwc: rockchip: Update for RK3588
  dt-bindings: auxdisplay: holtek: Add missing type for "linux,no-autorepeat"
  dt-bindings: input: mediatek,pmic-keys: Fix typo in "linux,keycodes" property name
  dt-bindings: pwm: drop unneeded quotes
  dt-bindings: crypto: drop unneeded quotes
  dt-bindings: arm: socionext: add Synquacer platforms
  dt-bindings: connector: usb: allow a single HS port
  dt-bindings: bus: ti-sysc: fix typo
  of: reserved_mem: Use stable allocation order
  of: reserved_mem: Try to keep range allocations contiguous
  dt-bindings: arm: drop unneeded quotes and use absolute /schemas path
  dt-bindings: firmware: arm,scmi: drop unneeded quotes and use absolute /schemas path
  dt-bindings: dvfs: drop unneeded quotes
  dt-bindings: gpu: drop unneeded quotes
  dt-bindings: i3c: silvaco,i3c-master: drop unneeded quotes
  dt-bindings: rockchip: grf: drop unneeded quotes
  dt-bindings: spmi: mtk,spmi-mtk-pmif: drop unneeded quotes
  dt-bindings: Remove last usage of "binding" or "schema" in titles
  dt-bindings: display: panel: mipi-dbi-spi: add spi-3wire property
  ...

Cleanup bindings dropping unneeded quotes. Once all these are fixed,
checking for this can be enabled in yamllint.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230609140735.64855-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>

Each device schema must end with unevaluatedProperties: false, if it
references other common schema.  Otherwise it would allow any properties
to be listed.

Fixes: b8b0446f1f1a ("dt-bindings: i3c: Describe Silvaco master binding")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230609141107.66128-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>

Add a devicetree binding for the ast2600 i3c controller hardware. This
is heavily based on the designware i3c core, plus a reset facility
and two platform-specific properties:

 - sda-pullup-ohms: to specify the value of the configurable pullup
   resistors on the SDA line

 - aspeed,global-regs: to reference the (ast2600-specific) i3c global
   register block, and the device index to use within it.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> (on v1)
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20230331091501.3800299-3-jk@codeconstruct.com.au
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>