Pull MFD updates from Lee Jones:
 "New Support & Features:
   - Add comprehensive support for the ROHM BD72720 PMIC, including core
     MFD, regulator, GPIO, clock gate, RTC, and power-supply drivers
   - Add support for the Rockchip RK801 PMIC, including core MFD and
     regulator drivers
   - Add support for the ROHM BD73900 PMIC by leveraging existing common
     drivers
   - Wire up RTC, hwmon, and input sub-devices for the Apple SMC
     (macsmc) driver
   - Add support for the Delta Networks TN48M switch CPLD via the
     simple-mfd-i2c driver
   - Add support for the TS133 variant to the QNAP MCU driver
   - Provide support for the sama7d65 XLCD controller in the Atmel HLCDC
     driver
   - Add backlight sub-device support to the Congatec Board Controller
     (cgbc)
   - Add Intel Nova Lake-S (NVL-S) PCI IDs to the Intel LPSS driver

  Improvements & Fixes:
   - Implement a "wrapper regmap" for the ROHM BD72720 to handle dual
     I2C slave addresses (0x4b and 0x4c) transparently for child devices
   - Introduce mutex locking around 'mfd_of_node_list' in the MFD core
     to ensure safe concurrent access
   - Fix a potential regulator resource leak in the Arizona core driver
     during boot sequence failures
   - Resolve child device duplication issues on driver rebind for
     Qualcomm PM8xxx and OMAP USB host drivers by using
     of_platform_depopulate()
   - Fix IRQ domain name duplication for the Samsung S2MPG10 by adding a
     unique domain suffix
   - Implement LOCK register handling for the TI TPS65214 variant to
     unlock registers at probe time
   - Fully convert the Loongson-2K BMC driver to use managed resources
     (pcim) and the standard PCI resource API
   - Ensure the Apple SMC mutex is correctly initialized during probe to
     prevent NULL pointer dereferences
   - Expand the ROHM BD71828 power-supply driver to support 9-bit
     register addresses
   - Simplify the Samsung S5M RTC driver by querying platform device IRQ
     resources directly
   - Revert an incorrect read-to-write mask change in the DA9052 SPI
     driver to restore default OTP behavior
   - Fix kernel-doc warnings in the TI TPS6105x driver

- Cleanups & Refactoring
   - Simplify the MFD core by utilizing the scoped
     for_each_child_of_node_scoped() macro and streamlining device_node
     storage
   - Rename ROHM BD71828 IC-specific entities to use consistent prefixes
     for better extensibility
   - Refactor ROHM BD71828 regmap definitions using the
     regmap_reg_range() macro
   - Update the ROHM BD71828 driver to use standard C-style comment
     headers
   - Remove the now unused 'irq_data' field from the Samsung SEC core
     structure
   - Drop unnecessary use of irqd_get_trigger_type() in the Maxim
     MAX77759 driver
   - Default MFD_SPACEMIT_P1 to 'm' if ARCH_SPACEMIT is selected
   - Add missing charger-related registers to the ROHM BD71828 core
     header and Type-C CC registers to the AXP717

  Device Tree Binding Updates:
   - Add new bindings for the ROHM BD72720 PMIC, Rockchip RK801 PMIC,
     Bitmain BM1880 System Controller, and NXP LPC32xx System Control
     Block
   - Clarify trickle-charge terminology and add properties for voltage
     drop (VDR) correction and upper charge limits to the generic
     battery binding
   - Document GPR syscon for NXP S32 SoCs and the smp-memram subnode for
     Aspeed SCU
   - Document numerous new Qualcomm SPMI PMIC compatibles (pmcx0102,
     pmh0101, pmk8850, etc)
   - Add compatibles for the sama7d65 XLCD (Atmel), LAN9691 Flexcom
     (Microchip), and various MediaTek SCPSYS and regulator components
   - Fix a dead link to the audio codec binding in the DA9055
     documentation"

* tag 'mfd-next-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (41 commits)
  dt-bindings: mfd: da9055: Fix dead link to codec binding
  mfd: cgbc: Add support for backlight
  dt-bindings: mfd: qcom,spmi-pmic: Document PMICs present on Glymur and Kaanapali
  dt-bindings: mfd: Document smp-memram subnode for aspeed,ast2x00-scu
  mfd: intel-lpss: Add Intel Nova Lake-S PCI IDs
  mfd: ls2kbmc: Use PCI API instead of direct accesses
  mfd: ls2kbmc: Fully convert to use managed resources
  dt-bindings: mfd: mediatek: mt6397: Add missing MT6331 regulator compat
  dt-bindings: mfd: mediatek,mt8195-scpsys: Add mediatek,mt6795-scpsys
  dt-bindings: mfd: atmel,sama5d2-flexcom: Add microchip,lan9691-flexcom
  mfd: omap-usb-host: Fix OF populate on driver rebind
  mfd: qcom-pm8xxx: Fix OF populate on driver rebind
  dt-bindings: mfd: syscon: Allow syscon compatible for mediatek,mt7981-topmisc
  mfd: qnap-mcu: Add driver data for TS133 variant
  dt-bindings: mfd: qnap,ts433-mcu: Add qnap,ts133-mcu compatible
  mfd: sec: Fix IRQ domain names duplication
  mfd: simple-mfd-i2c: Add Delta TN48M CPLD support
  mfd: macsmc: Initialize mutex
  dt-bindings: mfd: nxp: Add NXP LPC32xx System Control Block
  mfd: Kconfig: Default MFD_SPACEMIT_P1 to 'm' if ARCH_SPACEMIT
  ...

Pull devicetree updates from Rob Herring:
 "DT core:

   - Sync dtc/libfdt with upstream v1.7.2-62-ga26ef6400bd8

   - Add a for_each_compatible_node_scoped() loop and convert users in
     cpufreq, dmaengine, clk, cdx, powerpc and Arm

   - Simplify of/platform.c with scoped loop helpers

   - Add fw_devlink tracking for "mmc-pwrseq"

   - Optimize fw_devlink callback code size for pinctrl-N properties

   - Replace strcmp_suffix() with strends()

  DT bindings:

   - Support building single binding targets

   - Convert google,goldfish-fb, cznic,turris-mox-rwtm, ti,prm-inst

   - Add bindings for Freescale AVIC, Realtek RTD1xxx system
     controllers, Microchip 25AA010A EEPROM, OnSemi FIN3385, IEI
     WT61P803 PUZZLE, Delta Electronics DPS-800-AB power supply,
     Infineon IR35221 Digital Multi-phase Controller, Infineon PXE1610
     Digital Dual Output 6+1 VR12.5 & VR13 CPU Controller,
     socionext,uniphier-smpctrl, and xlnx,zynqmp-firmware

   - Lots of trivial binding fixes to address warnings in DTS files.
     These are mostly for arm64 platforms which is getting closer to be
     warning free. Some public shaming has helped.

   - Fix I2C bus node names in examples

   - Drop obsolete brcm,vulcan-soc binding

   - Drop unreferenced binding headers"

* tag 'devicetree-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (60 commits)
  dt-bindings: interrupt-controller: Add compatiblie string fsl,imx(1|25|27|31|35)-avic
  dt-bindings: soc: imx: add fsl,aips and fsl,emi compatible strings
  dt-bindings: display: bridge: lt8912b: Drop reset gpio requirement
  dt-bindings: firmware: fsl,scu: Mark multi-channel MU layouts as deprecated
  cpufreq: s5pv210: Simplify with scoped for each OF child loop
  dmaengine: fsl_raid: Simplify with scoped for each OF child loop
  clk: imx: imx31: Simplify with scoped for each OF child loop
  clk: imx: imx27: Simplify with scoped for each OF child loop
  cdx: Use mutex guard to simplify error handling
  cdx: Simplify with scoped for each OF child loop
  powerpc/wii: Simplify with scoped for each OF child loop
  powerpc/fsp2: Simplify with scoped for each OF child loop
  ARM: exynos: Simplify with scoped for each OF child loop
  ARM: at91: Simplify with scoped for each OF child loop
  of: Add for_each_compatible_node_scoped() helper
  dt-bindings: Fix emails with spaces or missing brackets
  scripts/dtc: Update to upstream version v1.7.2-62-ga26ef6400bd8
  dt-bindings: crypto: inside-secure,safexcel: Mandate only ring IRQs
  dt-bindings: crypto: inside-secure,safexcel: Add SoC compatibles
  of: reserved_mem: Fix placement of __free() annotation
  ...

Pull gpio updates from Bartosz Golaszewski:
 "There are two new drivers and some changes to GPIO core but mostly
  just GPIO driver updates across a wide array of files, adding support
  for new models as well as various refactoring changes. Nothing
  controversial and everything has spent a good measure of time in
  linux-next.

  GPIOLIB core:
   - shrink the GPIO bus driver stub code
   - rework software node support for "undefined" software nodes
   - provide and use devm_fwnode_gpiod_get_optional()
   - only compile the OF quirk for MT2701 when needed

  New drivers:
   - add the GPIO driver for ROHM bd72720
   - add the gpio-line-mux driver providing 1-to-many mapping for a
     single real GPIO

  Driver changes:
   - refactor gpio-pca9570: use lock guard, add missing headers, use
     devres consistently
   - add support for a new model (G7 Aspeed sgpiom) to the aspeed-sgpio
     driver along with some prerequisite refactoring
   - use device_get_match_data() where applicable and save some lines
   - add support for more models to gpio-cadence
   - add the compatible property to reset-gpio and use it in shared GPIO
     management
   - drop unnecessary use of irqd_get_trigger_type() in gpio-max77759
   - add support for a new variant to gpio-pca953x
   - extend build coverage with COMPILE_TEST for more drivers
   - constify configfs structures in gpio-sim and gpio-virtuser
   - add support for the K3 SoC to gpio-spacemit
   - implement the missing .get_direction() callback in gpio-max77620
   - add support for Tegra264 to gpio-tegra186
   - drop unneeded MODULE_ALIAS() from gpio-menz127

  DT bindings:
   - document support for the opencores GPIO controller in gpio-mmio
   - document new variants for gpio-pca953x

  Documentation:
   - extensively describe interrupt source detection for gpio-pca953x
     and add more models to the list of supported variants"

* tag 'gpio-updates-for-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (59 commits)
  gpio: tegra186: Add support for Tegra264
  dt-bindings: gpio: Add Tegra264 support
  gpio: spacemit-k1: Use PDR for pin direction, not SDR/CDR
  gpio: max77620: Implement .get_direction() callback
  gpio: aspeed-sgpio: Support G7 Aspeed sgpiom controller
  dt-bindings: gpio: aspeed,sgpio: Support ast2700
  gpio: aspeed-sgpio: Convert IRQ functions to use llops callbacks
  gpio: aspeed-sgpio: Create llops to handle hardware access
  gpio: aspeed-sgpio: Remove unused bank name field
  gpio: aspeed-sgpio: Change the macro to support deferred probe
  regulator: bd71815: switch to devm_fwnode_gpiod_get_optional
  gpiolib: introduce devm_fwnode_gpiod_get_optional() wrapper
  gpio: mmio: Add compatible for opencores GPIO
  dt-bindings: gpio-mmio: Correct opencores GPIO
  gpio: pca9570: use lock guards
  gpio: pca9570: Don't use "proxy" headers
  gpio: pca9570: Use devm_mutex_init() for mutex initialization
  MAINTAINERS: Add ROHM BD72720 PMIC
  power: supply: bd71828-power: Support ROHM BD72720
  power: supply: bd71828: Support wider register addresses
  ...

Merge series from André Draszik <andre.draszik@linaro.org>:

This series extends the existing S2MPG10 PMIC driver to add support for
the regulators, and adds new S2MPG11 core and regulator drivers.

The patches are kept together in one series, due to S2MPG11 and its
regulators being very similar to S2MPG10.

The Samsung S2MPG11 PMIC is a Power Management IC for mobile
applications with buck converters, various LDOs, power meters, and
additional GPIO interfaces. It typically complements an S2MPG10 PMIC in
a main/sub configuration as the sub-PMIC and both are used on the
Google Pixel 6 and 6 Pro (oriole / raven).

A DT update for Oriole / Raven to enable these is required which I will
send out separately.

The simple audio codec bindings were consolidated into
trivial-codec.yaml by commit 4acbfcf11cbe ("ASoC: dt-bindings:
consolidate simple audio codec to trivial-codec.yaml").

Update the DA9055 binding documentation to reference the new
trivial-codec.yaml location.

Signed-off-by: Soham Metha <sohammetha01@gmail.com>
Link: https://patch.msgid.link/20260126111309.22097-1-sohammetha01@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>

The Samsung S2MPG11 PMIC is similar to the existing S2MPG10 PMIC
supported by this binding, but still differs enough from it to justify
a separate binding.

It is a Power Management IC for mobile applications with buck
converters, various LDOs, power meters, NTC thermistor inputs, and
additional GPIO interfaces and typically complements an S2MPG10 PMIC in
a main/sub configuration as the sub-PMIC.

Like S2MPG10, communication is via the Samsung ACPM firmware and it
therefore needs to be a child of the ACPM firmware node.

Add the PMIC, the regulators node, and the supply inputs of the
regulator rails, with the supply names matching the datasheet.

Note: S2MPG11 is typically used as the sub-PMIC together with an
S2MPG10 PMIC in a main/sub configuration, hence the datasheet and the
binding both suffix the supplies with an 's'.

Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20260122-s2mpg1x-regulators-v7-6-3b1f9831fffd@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>

Update the regulators node to link to the correct and expected
samsung,s2mpg10-regulators binding, in order to describe the regulators
available on this PMIC.

Additionally, describe the supply inputs of the regulator rails, with
the supply names matching the datasheet.

While at it, update the description and example slightly.

Note: S2MPG10 is typically used as the main-PMIC together with an
S2MPG11 PMIC in a main/sub configuration, hence the datasheet and the
binding both suffix the supplies with an 'm'.

Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20260122-s2mpg1x-regulators-v7-5-3b1f9831fffd@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>

The samsung,s2mpg10-pmic binding is going to acquire various additional
properties. To avoid making the common samsung,s2mps11 binding file too
complicated due to additional nesting, split s2mpg10 out into its own
file.

As a side-effect, the oneOf for the interrupts is not required anymore,
as the required: node is at the top-level now.

Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20260122-s2mpg1x-regulators-v7-4-3b1f9831fffd@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>

The Realtek system controllers are already in use with only generic
'"syscon", "simple-mfd"' compatibles and are missing specific
compatibles as required. Add a schema with specific compatibles. The
labels used in .dts files serve as the basis for the names.

It's doubtful the child nodes upstream are complete and I don't have
documentation, so the specific child nodes aren't documented here. Of
the ones in use, bindings already exist for them.

Link: https://patch.msgid.link/20251215212624.3319681-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>

Add the IEI WT61P803 PUZZLE Device Tree bindings for MFD, HWMON and LED
drivers. A new vendor prefix is also added accordingly for
IEI Integration Corp.

Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr>
Signed-off-by: Pavo Banicevic <pavo.banicevic@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Cc: Robert Marko <robert.marko@sartura.hr>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://patch.msgid.link/20210824124438.14519-2-luka.kovacic@sartura.hr
[robh: fix warnings from current tools]
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>