The FPC202 dual port controller has 20 regular GPIO lines and 8 special GPIO lines with LED features. Each one of these "LED GPIOs" can output PWM and blink signals. Describe these special-purpose GPIO lines. Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Romain Gantois <romain.gantois@bootlin.com> Link: https://patch.msgid.link/20260331-fpc202-leds-v3-2-74b173537d42@bootlin.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Document compatible for Qualcomm Glymur fastrpc which is fully compatible with Qualcomm Kaanapali fastrpc. Signed-off-by: Sibi Sankar <sibi.sankar@oss.qualcomm.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Link: https://patch.msgid.link/20260331032121.1279203-1-sibi.sankar@oss.qualcomm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert the Android Goldfish QEMU Pipe binding to DT schema format. Move the file to the misc directory as it represents a miscellaneous communication device. Update the example node name to 'pipe' to comply with generic node naming standards and fix the mismatch between unit address and reg property in the original example. Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Link: https://patch.msgid.link/20260113092602.3197681-3-visitorckw@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We need the char/misc fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull SoC fixes from Arnd Bergmann:
"The main code change is a revert of the Raspberry Pi RP1 overlay
support that was decided to not be ready.
The other fixes are all for devicetree sources:
- ethernet configuration on ixp42x-actiontec-mi424wr is board
revision specific
- validation warning fixes for imx27/imx51/imx6, hikey960 and k3
- Minor corrections across imx8 boards, addressing all types of
issues with interrups, dma, ethernet and clock settings, all simple
one-line changes"
* tag 'soc-fixes-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits)
arm64: dts: hisilicon: hikey960: Drop "snps,gctl-reset-quirk" and "snps,tx_de_emphasis*" properties
Documentation/process: maintainer-soc: Mark 'make' as commands
Documentation/process: maintainer-soc: Be more explicit about defconfig
arm64: dts: mba8mx: Fix Ethernet PHY IRQ support
arm64: dts: imx8qm-ss-dma: correct the dma channels of lpuart
arm64: dts: imx8mp: Fix LAN8740Ai PHY reference clock on DH electronics i.MX8M Plus DHCOM
arm64: dts: freescale: tx8p-ml81: fix eqos nvmem-cells
arm64: dts: freescale: moduline-display: fix compatible
dt-bindings: arm: fsl: moduline-display: fix compatible
ARM: dts: imx6q-ba16: fix RTC interrupt level
arm64: dts: freescale: imx95-toradex-smarc: fix SMARC_SDIO_WP label position
arm64: dts: freescale: imx95-toradex-smarc: use edge trigger for ethphy1 interrupt
arm64: dts: add off-on-delay-us for usdhc2 regulator
arm64: dts: imx8qm-mek: correct the light sensor interrupt type to low level
ARM: dts: nxp: imx: Fix mc13xxx LED node names
arm64: dts: imx95: correct I3C2 pclk to IMX95_CLK_BUSWAKEUP
MAINTAINERS: Fix a linusw mail address
arm64: dts: broadcom: rp1: drop RP1 overlay
arm64: dts: broadcom: bcm2712: fix RP1 endpoint PCI topology
misc: rp1: drop overlay support
...
Kaanapali introduces changes in DSP IOVA layout and CDSP DMA addressing that differ from previous SoCs. The SID field moves within the physical address, and CDSP now supports a wider DMA range, requiring updated sid_pos and DMA mask handling in the driver. Signed-off-by: Kumari Pallavi <kumari.pallavi@oss.qualcomm.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Link: https://patch.msgid.link/20251226070534.602021-2-kumari.pallavi@oss.qualcomm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The PCI subsystem links an endpoint Device Tree node to its corresponding pci_dev structure only if the Bus/Device/Function (BDF) encoded in the 'reg' property matches the actual hardware topology. Add the 'reg' property and mark it as required to ensure proper binding between the device_node and the pci_dev. Update the example to reflect this requirement. Signed-off-by: Andrea della Porta <andrea.porta@suse.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/b58bfcd957b2270fcf932d463f2db534b2ae1a6d.1766077285.git.andrea.porta@suse.com Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
My name is stamped into maintainership for a big slew of DT bindings. Now that it is changing, switch it over to my kernel.org mail address, which will hopefully be stable for the rest of my life. Signed-off-by: Linus Walleij <linusw@kernel.org> Link: https://patch.msgid.link/20251216-maintainers-dt-v1-1-0b5ab102c9bb@kernel.org Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Pull Char/Misc/IIO/Binder updates from Greg KH:
"Here is the big set of char/misc/iio and other driver subsystem
changes for 6.18-rc1.
Loads of different stuff in here, it was a busy development cycle in
lots of different subsystems, with over 27k new lines added to the
tree.
Included in here are:
- IIO updates including new drivers, reworking of existing apis, and
other goodness in the sensor subsystems
- MEI driver updates and additions
- NVMEM driver updates
- slimbus removal for an unused driver and some other minor updates
- coresight driver updates and additions
- MHI driver updates
- comedi driver updates and fixes
- extcon driver updates
- interconnect driver additions
- eeprom driver updates and fixes
- minor UIO driver updates
- tiny W1 driver updates
But the majority of new code is in the rust bindings and additions,
which includes:
- misc driver rust binding updates for read/write support, we can now
write "normal" misc drivers in rust fully, and the sample driver
shows how this can be done.
- Initial framework for USB driver rust bindings, which are disabled
for now in the build, due to limited support, but coming in through
this tree due to dependencies on other rust binding changes that
were in here. I'll be enabling these back on in the build in the
usb.git tree after -rc1 is out so that developers can continue to
work on these in linux-next over the next development cycle.
- Android Binder driver implemented in Rust.
This is the big one, and was driving a huge majority of the rust
binding work over the past years. Right now there are two binder
drivers in the kernel, selected only at build time as to which one
to use as binder wants to be included in the system at boot time.
The binder C maintainers all agreed on this, as eventually, they
want the C code to be removed from the tree, but it will take a few
releases to get there while both are maintained to ensure that the
rust implementation is fully stable and compliant with the existing
userspace apis.
All of these have been in linux-next for a while"
* tag 'char-misc-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (320 commits)
rust: usb: keep usb::Device private for now
rust: usb: don't retain device context for the interface parent
USB: disable rust bindings from the build for now
samples: rust: add a USB driver sample
rust: usb: add basic USB abstractions
coresight: Add label sysfs node support
dt-bindings: arm: Add label in the coresight components
coresight: tnoc: add new AMBA ID to support Trace Noc V2
coresight: Fix incorrect handling for return value of devm_kzalloc
coresight: tpda: fix the logic to setup the element size
coresight: trbe: Return NULL pointer for allocation failures
coresight: Refactor runtime PM
coresight: Make clock sequence consistent
coresight: Refactor driver data allocation
coresight: Consolidate clock enabling
coresight: Avoid enable programming clock duplicately
coresight: Appropriately disable trace bus clocks
coresight: Appropriately disable programming clocks
coresight: etm4x: Support atclk
coresight: catu: Support atclk
...
Convert the aspeed,ast2x00-p2a-ctrl binding to DT schema format. The schema is simple enough to just add it to the parent aspeed,ast2x00-scu binding. Signed-off-by: "Rob Herring (Arm)" <robh@kernel.org> Acked-by: Andrew Jeffery <andrew@codeconstruct.com.au> Link: https://lore.kernel.org/r/20250829230450.1496151-1-robh@kernel.org Signed-off-by: Lee Jones <lee@kernel.org>