Add a reference to mc-peripheral-props.yaml to allow vendor-specific
properties for memory access timings.

Fix below CHECK_DTBS warings:
arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-rdk.dtb: can@4,0 (nxp,sja1000): Unevaluated properties are not allowed ('fsl,weim-cs-timing' was unexpected)
        from schema $id: http://devicetree.org/schemas/net/can/nxp,sja1000.yaml

Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260212163000.1195586-1-Frank.Li@nxp.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Pull networking updates from Paolo Abeni:
 "Core & protocols:

   - A significant effort all around the stack to guide the compiler to
     make the right choice when inlining code, to avoid unneeded calls
     for small helper and stack canary overhead in the fast-path.

     This generates better and faster code with very small or no text
     size increases, as in many cases the call generated more code than
     the actual inlined helper.

   - Extend AccECN implementation so that is now functionally complete,
     also allow the user-space enabling it on a per network namespace
     basis.

   - Add support for memory providers with large (above 4K) rx buffer.
     Paired with hw-gro, larger rx buffer sizes reduce the number of
     buffers traversing the stack, dincreasing single stream CPU usage
     by up to ~30%.

   - Do not add HBH header to Big TCP GSO packets. This simplifies the
     RX path, the TX path and the NIC drivers, and is possible because
     user-space taps can now interpret correctly such packets without
     the HBH hint.

   - Allow IPv6 routes to be configured with a gateway address that is
     resolved out of a different interface than the one specified,
     aligning IPv6 to IPv4 behavior.

   - Multi-queue aware sch_cake. This makes it possible to scale the
     rate shaper of sch_cake across multiple CPUs, while still enforcing
     a single global rate on the interface.

   - Add support for the nbcon (new buffer console) infrastructure to
     netconsole, enabling lock-free, priority-based console operations
     that are safer in crash scenarios.

   - Improve the TCP ipv6 output path to cache the flow information,
     saving cpu cycles, reducing cache line misses and stack use.

   - Improve netfilter packet tracker to resolve clashes for most
     protocols, avoiding unneeded drops on rare occasions.

   - Add IP6IP6 tunneling acceleration to the flowtable infrastructure.

   - Reduce tcp socket size by one cache line.

   - Notify neighbour changes atomically, avoiding inconsistencies
     between the notification sequence and the actual states sequence.

   - Add vsock namespace support, allowing complete isolation of vsocks
     across different network namespaces.

   - Improve xsk generic performances with cache-alignment-oriented
     optimizations.

   - Support netconsole automatic target recovery, allowing netconsole
     to reestablish targets when underlying low-level interface comes
     back online.

  Driver API:

   - Support for switching the working mode (automatic vs manual) of a
     DPLL device via netlink.

   - Introduce PHY ports representation to expose multiple front-facing
     media ports over a single MAC.

   - Introduce "rx-polarity" and "tx-polarity" device tree properties,
     to generalize polarity inversion requirements for differential
     signaling.

   - Add helper to create, prepare and enable managed clocks.

  Device drivers:

   - Add Huawei hinic3 PF etherner driver.

   - Add DWMAC glue driver for Motorcomm YT6801 PCIe ethernet
     controller.

   - Add ethernet driver for MaxLinear MxL862xx switches

   - Remove parallel-port Ethernet driver.

   - Convert existing driver timestamp configuration reporting to
     hwtstamp_get and remove legacy ioctl().

   - Convert existing drivers to .get_rx_ring_count(), simplifing the RX
     ring count retrieval. Also remove the legacy fallback path.

   - Ethernet high-speed NICs:
      - Broadcom (bnxt, bng):
         - bnxt: add FW interface update to support FEC stats histogram
           and NVRAM defragmentation
         - bng: add TSO and H/W GRO support
      - nVidia/Mellanox (mlx5):
         - improve latency of channel restart operations, reducing the
           used H/W resources
         - add TSO support for UDP over GRE over VLAN
         - add flow counters support for hardware steering (HWS) rules
         - use a static memory area to store headers for H/W GRO,
           leading to 12% RX tput improvement
      - Intel (100G, ice, idpf):
         - ice: reorganizes layout of Tx and Rx rings for cacheline
           locality and utilizes __cacheline_group* macros on the new
           layouts
         - ice: introduces Synchronous Ethernet (SyncE) support
      - Meta (fbnic):
         - adds debugfs for firmware mailbox and tx/rx rings vectors

   - Ethernet virtual:
      - geneve: introduce GRO/GSO support for double UDP encapsulation

   - Ethernet NICs consumer, and embedded:
      - Synopsys (stmmac):
         - some code refactoring and cleanups
      - RealTek (r8169):
         - add support for RTL8127ATF (10G Fiber SFP)
         - add dash and LTR support
      - Airoha:
         - AN8811HB 2.5 Gbps phy support
      - Freescale (fec):
         - add XDP zero-copy support
      - Thunderbolt:
         - add get link setting support to allow bonding
      - Renesas:
         - add support for RZ/G3L GBETH SoC

   - Ethernet switches:
      - Maxlinear:
         - support R(G)MII slow rate configuration
         - add support for Intel GSW150
      - Motorcomm (yt921x):
         - add DCB/QoS support
      - TI:
         - icssm-prueth: support bridging (STP/RSTP) via the switchdev
           framework

   - Ethernet PHYs:
      - Realtek:
         - enable SGMII and 2500Base-X in-band auto-negotiation
         - simplify and reunify C22/C45 drivers
      - Micrel: convert bindings to DT schema

   - CAN:
      - move skb headroom content into skb extensions, making CAN
        metadata access more robust

   - CAN drivers:
      - rcar_canfd:
         - add support for FD-only mode
         - add support for the RZ/T2H SoC
      - sja1000: cleanup the CAN state handling

   - WiFi:
      - implement EPPKE/802.1X over auth frames support
      - split up drop reasons better, removing generic RX_DROP
      - additional FTM capabilities: 6 GHz support, supported number of
        spatial streams and supported number of LTF repetitions
      - better mac80211 iterators to enumerate resources
      - initial UHR (Wi-Fi 8) support for cfg80211/mac80211

   - WiFi drivers:
      - Qualcomm/Atheros:
         - ath11k: support for Channel Frequency Response measurement
         - ath12k: a significant driver refactor to support multi-wiphy
           devices and and pave the way for future device support in the
           same driver (rather than splitting to ath13k)
         - ath12k: support for the QCC2072 chipset
      - Intel:
         - iwlwifi: partial Neighbor Awareness Networking (NAN) support
         - iwlwifi: initial support for U-NII-9 and IEEE 802.11bn
      - RealTek (rtw89):
         - preparations for RTL8922DE support

   - Bluetooth:
      - implement setsockopt(BT_PHY) to set the connection packet type/PHY
      - set link_policy on incoming ACL connections

   - Bluetooth drivers:
      - btusb: add support for MediaTek7920, Realtek RTL8761BU and 8851BE
      - btqca: add WCN6855 firmware priority selection feature"

* tag 'net-next-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1254 commits)
  bnge/bng_re: Add a new HSI
  net: macb: Fix tx/rx malfunction after phy link down and up
  af_unix: Fix memleak of newsk in unix_stream_connect().
  net: ti: icssg-prueth: Add optional dependency on HSR
  net: dsa: add basic initial driver for MxL862xx switches
  net: mdio: add unlocked mdiodev C45 bus accessors
  net: dsa: add tag format for MxL862xx switches
  dt-bindings: net: dsa: add MaxLinear MxL862xx
  selftests: drivers: net: hw: Modify toeplitz.c to poll for packets
  octeontx2-pf: Unregister devlink on probe failure
  net: renesas: rswitch: fix forwarding offload statemachine
  ionic: Rate limit unknown xcvr type messages
  tcp: inet6_csk_xmit() optimization
  tcp: populate inet->cork.fl.u.ip6 in tcp_v6_syn_recv_sock()
  tcp: populate inet->cork.fl.u.ip6 in tcp_v6_connect()
  ipv6: inet6_csk_xmit() and inet6_csk_update_pmtu() use inet->cork.fl.u.ip6
  ipv6: use inet->cork.fl.u.ip6 and np->final in ip6_datagram_dst_update()
  ipv6: use np->final in inet6_sk_rebuild_header()
  ipv6: add daddr/final storage in struct ipv6_pinfo
  net: stmmac: qcom-ethqos: fix qcom_ethqos_serdes_powerup()
  ...

Pull devicetree updates from Rob Herring:
 "DT core:

   - Sync dtc/libfdt with upstream v1.7.2-62-ga26ef6400bd8

   - Add a for_each_compatible_node_scoped() loop and convert users in
     cpufreq, dmaengine, clk, cdx, powerpc and Arm

   - Simplify of/platform.c with scoped loop helpers

   - Add fw_devlink tracking for "mmc-pwrseq"

   - Optimize fw_devlink callback code size for pinctrl-N properties

   - Replace strcmp_suffix() with strends()

  DT bindings:

   - Support building single binding targets

   - Convert google,goldfish-fb, cznic,turris-mox-rwtm, ti,prm-inst

   - Add bindings for Freescale AVIC, Realtek RTD1xxx system
     controllers, Microchip 25AA010A EEPROM, OnSemi FIN3385, IEI
     WT61P803 PUZZLE, Delta Electronics DPS-800-AB power supply,
     Infineon IR35221 Digital Multi-phase Controller, Infineon PXE1610
     Digital Dual Output 6+1 VR12.5 & VR13 CPU Controller,
     socionext,uniphier-smpctrl, and xlnx,zynqmp-firmware

   - Lots of trivial binding fixes to address warnings in DTS files.
     These are mostly for arm64 platforms which is getting closer to be
     warning free. Some public shaming has helped.

   - Fix I2C bus node names in examples

   - Drop obsolete brcm,vulcan-soc binding

   - Drop unreferenced binding headers"

* tag 'devicetree-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (60 commits)
  dt-bindings: interrupt-controller: Add compatiblie string fsl,imx(1|25|27|31|35)-avic
  dt-bindings: soc: imx: add fsl,aips and fsl,emi compatible strings
  dt-bindings: display: bridge: lt8912b: Drop reset gpio requirement
  dt-bindings: firmware: fsl,scu: Mark multi-channel MU layouts as deprecated
  cpufreq: s5pv210: Simplify with scoped for each OF child loop
  dmaengine: fsl_raid: Simplify with scoped for each OF child loop
  clk: imx: imx31: Simplify with scoped for each OF child loop
  clk: imx: imx27: Simplify with scoped for each OF child loop
  cdx: Use mutex guard to simplify error handling
  cdx: Simplify with scoped for each OF child loop
  powerpc/wii: Simplify with scoped for each OF child loop
  powerpc/fsp2: Simplify with scoped for each OF child loop
  ARM: exynos: Simplify with scoped for each OF child loop
  ARM: at91: Simplify with scoped for each OF child loop
  of: Add for_each_compatible_node_scoped() helper
  dt-bindings: Fix emails with spaces or missing brackets
  scripts/dtc: Update to upstream version v1.7.2-62-ga26ef6400bd8
  dt-bindings: crypto: inside-secure,safexcel: Mandate only ring IRQs
  dt-bindings: crypto: inside-secure,safexcel: Add SoC compatibles
  of: reserved_mem: Fix placement of __free() annotation
  ...

Add documentation and an example for MaxLinear MxL86282 and MxL86252
switches.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/22a6a3c8c15b932ff4b7d0cd8863939f06a0c2b4.1770433307.git.daniel@makrotopia.org
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Reference the common PHY properties so RX and TX SerDes lane polarity
of the SGMII/1000Base-X/2500Base-X port can be configured.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/f556ef8be75e37a2f864b9d905a78962bbe76d18.1769916962.git.daniel@makrotopia.org
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Johannes Berg says:

====================
Some more changes, including pulls from drivers:
 - ath drivers: small features/cleanups
 - rtw drivers: mostly refactoring for rtw89 RTL8922DE support
 - mac80211: use hrtimers for CAC to avoid too long delays
 - cfg80211/mac80211: some initial UHR (Wi-Fi 8) support

* tag 'wireless-next-2026-02-04' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (59 commits)
  wifi: brcmsmac: phy: Remove unreachable error handling code
  wifi: mac80211: Add eMLSR/eMLMR action frame parsing support
  wifi: mac80211: add initial UHR support
  wifi: cfg80211: add initial UHR support
  wifi: ieee80211: add some initial UHR definitions
  wifi: mac80211: use wiphy_hrtimer_work for CAC timeout
  wifi: mac80211: correct ieee80211-{s1g/eht}.h include guard comments
  wifi: ath12k: clear stale link mapping of ahvif->links_map
  wifi: ath12k: Add support TX hardware queue stats
  wifi: ath12k: Add support RX PDEV stats
  wifi: ath12k: Fix index decrement when array_len is zero
  wifi: ath12k: support OBSS PD configuration for AP mode
  wifi: ath12k: add WMI support for spatial reuse parameter configuration
  dt-bindings: net: wireless: ath11k-pci: deprecate 'firmware-name' property
  wifi: ath11k: add usecase firmware handling based on device compatible
  wifi: ath10k: sdio: add missing lock protection in ath10k_sdio_fw_crashed_dump()
  wifi: ath10k: fix lock protection in ath10k_wmi_event_peer_sta_ps_state_chg()
  wifi: ath10k: snoc: support powering on the device via pwrseq
  wifi: rtw89: pci: warn if SPS OCP happens for RTL8922DE
  wifi: rtw89: pci: restore LDO setting after device resume
  ...
====================

Link: https://patch.msgid.link/20260204121143.181112-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

As per the RZ/G3L Hardware manual, CPG_CLKON_ETH register bits{12,13} are
to control the RMII{tx, rx} clocks. Document the rmii{tx.rx} clocks for
RZ/G3L SoC.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260203104541.264759-1-biju.das.jz@bp.renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The S32 chipsets have a GPR region which has a miscellaneous registers
including the GMAC_0_CTRL_STS register.  Originally, this code accessed
that register in a sort of ad-hoc way, but it's cleaner to use a
syscon interface to access these registers.

We still need to maintain the old method of accessing the GMAC register
but using a syscon will let us access other registers more cleanly.

Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/3b75e950b2f8faecd1a9fa757e7eb7b42ace838f.1769764941.git.dan.carpenter@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The Broadcom AMAC controller is DMA coherent on some platforms, so allow
the dma-coherent property.

Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251215212709.3320889-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>

Add device tree binding support for the Gigabit Ethernet (GBETH) IP on
Renesas RZ/G3L SoC. This SoC uses different Synopsys DesignWare MAC
version 5.30 compared to RZ/G3E.

RZ/G3L requires an extra clock compared to RZ/G3E and has pps interrupts.

Add a new compatible string "renesas,r9a08g046-gbeth" for RZ/G3L SoC and
update the schema to handle hardware differences between SoC variants.

Extend the base snps,dwmac.yaml schema to accommodate the PPS interrupts.

Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://patch.msgid.link/20260131161250.5047-2-biju.das.jz@bp.renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>