linux-toradex.git/Documentation/devicetree/bindings/phy, branch v4.10

Documentation: dt-bindings: rename meson-usb2-phy to meson8b-usb2-phy

2016-11-18T12:49:14+00:00

The corresponding driver only supports the USB PHY on Meson8b and GXBB
SoCs. Newer SoC versions are using a different USB PHY implementation,
which will mean that a new driver is required. Thus make sure that our
naming is specific enough so it does not conflict with upcoming drivers.

Acked-by: Rob Herring 
Signed-off-by: Martin Blumenstingl 
Signed-off-by: Kishon Vijay Abraham I

Documentation: dt-bindings: update the meson-usb2-phy example

2016-11-18T12:49:14+00:00

Update the example so the node name uses a dash (instead of an
underscore) as per convention.
Additionally it updates the example register offset to a real example
(the old value was taken from a draft where there was an additional PHY
bus).

Acked-by: Rob Herring 
Signed-off-by: Martin Blumenstingl 
Signed-off-by: Kishon Vijay Abraham I

Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2016-10-08T04:34:49+00:00

Pull ARM SoC late DT updates from Arnd Bergmann:
 "These updates have been kept in a separate branch mostly because they
  rely on updates to the respective clk drivers to keep the shared
  header files in sync.

   - The Renesas r8a7796 (R-Car M3-W) platform gets added, this is an
     automotive SoC similar to the ⅹ8a7795 chip we already support, but
     the dts changes rely on a clock driver change that has been merged
     for v4.9 through the clk tree.

   - The Amlogic meson-gxbb (S905) platform gains support for a few
     drivers merged through our tree, in particular the network and usb
     driver changes are required and included here, and also the clk
     tree changes.

   - The Allwinner platforms have seen a large-scale change to their clk
     drivers and the dts file updates must come after that. This
     includes the newly added Nextthing GR8 platform, which is derived
     from sun5i/A13.

   - Some integrator (arm32) changes rely on clk driver changes.

   - A single patch for lpc32xx has no such dependency but wasn't added
     until just before the merge window"

* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (99 commits)
  ARM: dts: lpc32xx: add device node for IRAM on-chip memory
  ARM: dts: sun8i: Add accelerometer to polaroid-mid2407pxe03
  ARM: dts: sun8i: enable UART1 for iNet D978 Rev2 board
  ARM: dts: sun8i: add pinmux for UART1 at PG
  dts: sun8i-h3: add I2C0-2 peripherals to H3 SOC
  dts: sun8i-h3: add pinmux definitions for I2C0-2
  dts: sun8i-h3: associate exposed UARTs on Orange Pi Boards
  dts: sun8i-h3: split off RTS/CTS for UART1 in seperate pinmux
  dts: sun8i-h3: add pinmux definitions for UART2-3
  ARM: dts: sun9i: a80-optimus: Disable EHCI1
  ARM: dts: sun9i: cubieboard4: Add AXP806 PMIC device node and regulators
  ARM: dts: sun9i: a80-optimus: Add AXP806 PMIC device node and regulators
  ARM: dts: sun9i: cubieboard4: Declare AXP809 SW regulator as unused
  ARM: dts: sun9i: a80-optimus: Declare AXP809 SW regulator as unused
  ARM: dts: sun8i: Add touchscreen node for sun8i-a33-ga10h
  ARM: dts: sun8i: Add touchscreen node for sun8i-a23-polaroid-mid2809pxe04
  ARM: dts: sun8i: Add touchscreen node for sun8i-a23-polaroid-mid2407pxe03
  ARM: dts: sun8i: Add touchscreen node for sun8i-a23-inet86dz
  ARM: dts: sun8i: Add touchscreen node for sun8i-a23-gt90h
  ARM64: dts: meson-gxbb-vega-s95: Enable USB Nodes
  ...

Merge branch 'next' into resolution

2016-09-15T11:15:20+00:00

Conflicts:
	drivers/extcon/extcon-adc-jack.c
	drivers/extcon/extcon-arizona.c
	drivers/extcon/extcon-gpio.c
	include/linux/extcon.h

Documentation: dt-bindings: Add documentation for the Meson USB2 PHYs

2016-09-14T18:19:01+00:00

Add the documentation for the bindings for the Meson8b and GXBB USB2
PHYs.

Signed-off-by: Martin Blumenstingl 
Acked-by: John Youn 
Signed-off-by: Kevin Hilman

phy: rockchip-usb: use rockchip_usb_phy_reset to reset phy during wakeup

2016-09-10T12:01:40+00:00

It is a hardware bug in RK3288, the only way to solve it is to
reset the phy.

Signed-off-by: Randy Li 
Signed-off-by: Kishon Vijay Abraham I

Documentation: bindings: add dt doc for Rockchip USB Type-C PHY

2016-09-10T11:19:02+00:00

This patch adds a binding that describes the Rockchip USB Type-C PHY
for rk3399

Signed-off-by: Chris Zhong 
Reviewed-by: Tomasz Figa 
Reviewed-by: Kever Yang 
Reviewed-by: Guenter Roeck 
Acked-by: Rob Herring 
Signed-off-by: Kishon Vijay Abraham I

dt-bindings: phy: ti: add documentation for ti,dra7x-usb2

2016-09-10T11:18:40+00:00

Commit 7e472402ca30 ("phy: omap-usb2: Provide workaround for
USB2PHY false disconnect") added a new binding for USB2 PHYs
on DRA7x. But it has remained undocumented so far.

Add documentation for the binding.

Signed-off-by: Sekhar Nori 
Signed-off-by: Roger Quadros 
Acked-by: Rob Herring 
Signed-off-by: Kishon Vijay Abraham I

phy: rcar-gen3-usb2: Add a compatible string for r8a7796

2016-09-10T11:18:38+00:00

This driver can support for r8a7796 SoC. So, this patch adds it.

Signed-off-by: Yoshihiro Shimoda 
Acked-by: Geert Uytterhoeven 
Acked-by: Rob Herring 
Signed-off-by: Kishon Vijay Abraham I

phy: rcar-gen3-usb2: revise the example of device tree doc

2016-09-10T11:18:37+00:00

The clocks property should be set to &cpg, not &mstpX_clks.

Signed-off-by: Yoshihiro Shimoda 
Reviewed-by: Geert Uytterhoeven 
Acked-by: Rob Herring 
Signed-off-by: Kishon Vijay Abraham I