Pull MFD updates from Lee Jones:
 "New Support & Features:
   - Cirrus Logic CS42L43: Add support for the CS42L44 variant
   - Khadas MCU: Add support for the VIM4 MCU variant along with
     per-variant fan duty-cycle levels and optional fan supply regulator
     support
   - Maxim MAX77705: Add support for the PASS2 hardware revision
   - MediaTek MT6397: Add AUXADC sub-device support for MT6397
   - Motorola CPCAP: Support per-board sub-device compositions and add
     the Tegra20 Mot composition
   - ROHM BD73800: Add support for the BD73800 PMIC core, regulator,
     RTC, clock gate, and GPIO sub-devices
   - TI LM3533: Add VIN regulator supply support, configure initial
     backlight mapping mode from Device Tree, and implement the
     `backlight_scale` property
   - X-Powers AC200: Add support for the AC200 I2C mixed-signal companion IC

  Improvements & Fixes:
   - Cirrus Logic CS42L43: Synchronize SoundWire enumeration work in
     `remove()` before devres cleanup begins
   - Dialog DA903x: Manage IRQ work cancellation and sub-device removal
     via devres to prevent use-after-free during teardown
   - Dialog DA9150: Balance `enable_irq_wake()` with
     `disable_irq_wake()` during probe failure and driver removal
   - Intel LPSS: Add DMI quirks for Dell Latitude 5285 and 7275 to
     ignore ACPI resource conflicts on the I2C4 controller
   - Intel Quark I2C/GPIO: Manage the fixed-rate clock and its clkdev
     lookup with devres to fix a resource leak on unbind
   - Maxim MAX77705: Select `REGMAP_I2C` and `REGMAP_IRQ` in Kconfig to
     fix build errors
   - Qualcomm WCD934x: Initialize the parent DMA mask to suppress "DMA
     mask not set" warnings on child devices
   - Qualcomm WCD934x: Pass the valid device pointer to
     `dev_err_probe()` on IRQ lookup failure to avoid a NULL pointer
     dereference
   - Rockchip RK8xx: Register the poweroff handler in the atomic
     `SYS_OFF_MODE_POWER_OFF` phase so polling I2C transfers complete
     during shutdown
   - ST-Ericsson AB8500: Use `devm_mfd_add_devices()` to prevent leaking
     child devices on probe failure
   - TI BQ257xx: Mark self-modifying BQ25792 configuration registers as
     volatile
   - TI LM3533: Set `coherent_dma_mask` to zero to suppress "DMA mask
     not set" warnings
   - TI TPS65217: Check for errors during IRQ initialization and
     masking, and manage IRQ domain and wake teardown with devres
   - TI TWL: Unregister the auxiliary platform device via a devres
     action on probe failure and driver unbind

  Cleanups & Refactoring
   - Core: Convert drivers from deprecated `SIMPLE_DEV_PM_OPS()` to
     `DEFINE_SIMPLE_DEV_PM_OPS()` and `pm_sleep_ptr()`
   - Core: Fix spelling mistakes in comments across various MFD drivers
     and headers
   - Maintainers: Add ROHM BD73800 PMIC files under the ROHM PMIC entry
   - Maintainers: Specify the `for-mfd-next` branch for the MFD and
     Syscon git trees
   - Dialog DA9062: Use `DEFINE_RES_IRQ_NAMED()` for IRQ resource
     definitions
   - Intel LPSS: Simplify DebugFS handling by dropping redundant error
     checks and intermediate dentry variables, using octal permissions,
     and switching to
    `debugfs_remove()`
   - Khadas MCU: Convert MFD cell arrays to `const` and use
     `MFD_CELL_NAME()`
   - ST-Ericsson AB8500: Fix a spelling typo in a comment
   - TI LM3533: Convert from platform data to Device Tree bindings and
     pass only regmap and light sensor presence to child devices
   - TI LM3533: Remove driver-specific regmap wrappers, redundant pdata
     helpers, and unnecessary `extern` qualifiers, and use `dev_groups`
     for sysfs attributes
   - Wolfson WM831x: Fix a spelling typo in a comment

  Device Tree Binding Updates
   - HiSilicon Hi6421 SPMI: Fix the compatible string to match
     `hisilicon,hi6421-spmi`
   - MediaTek MT6357: Allow an `adc` child node
   - MediaTek MT6360: Allow two-cell interrupt specifiers with trigger
     flags
   - MediaTek MT6397: Document the `#sound-dai-cells` property
   - MediaTek MT6397: Document the battery-backed NVMEM layout under the
     RTC child node
   - MediaTek MT6397: Document the MT6323 PMIC EFUSE child node
   - Motorola CPCAP: Convert MFD and power button bindings to DT schema
     and document the Mapphone and Mot compositions
   - Qualcomm SPMI PMIC: Document the PM4125 audio codec compatible
   - Qualcomm SPMI PMIC: Document the PMAU0102 PMIC compatible
   - Qualcomm TCSR: Document the MSM8952 TCSR compatible
   - Rockchip RK805: Fold the pin controller binding into the RK805 PMIC
     DT schema
   - ROHM BD73800: Document the BD73800 PMIC and its regulators
   - ROHM PMIC: Factor out common pin properties into
     `rohm,pmic-pins.yaml` and reference them across BD71815, BD71828,
     and BD72720 bindings
   - ST-Ericsson AB8500: Document AB8500 and AB8505 buck converter
     regulators
   - ST-Ericsson AB8500: Document codec audio graph ports, sound DAI
     cells, and analog microphone wiring properties
   - ST-Ericsson DB8500 PRCMU: Deprecate the `db8500-prcmu-regulators`
     child node and make it optional
   - Syscon: Document the Ambarella CV75 secure scratchpad compatible
   - TI BQ25703A: Add the BQ25798 compatible with fallback to BQ25792
   - TI Keystone: Convert Device State Control bindings to DT schema
   - TI LM3533: Document the LM3533 LED controller, backlight, and
     indicator LED bindings
   - TI LP3943: Convert MFD and PWM bindings to DT schema
   - TI TPS61050: Convert bindings to DT schema
   - TI TPS65086: Make the `regulators` child node optional
   - TI TPS65910: Document `wakeup-source` and GPIO hog child nodes
   - TI TWL6040: Convert bindings to DT schema and align property names
     with the driver
   - X-Powers AC200: Document the AC200 mixed-signal companion IC"

* tag 'mfd-next-7.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (74 commits)
  dt-bindings: mfd: db8500-prcmu: Deprecate EPOD regulators
  dt-bindings: mfd: syscon: Add Ambarella CV75 secure scratchpad
  dt-bindings: mfd: rockchip,rk805: Convert pinctrl to DT schema
  mfd: intel-lpss: Add Dell Latitude 7275 to the resource conflict quirk
  mfd: intel-lpss: Add resource conflict quirk for Dell Latitude 5285
  mfd: tps65217: Use devres for IRQ domain and wake teardown
  mfd: tps65217: Check return value when masking interrupt sources
  mfd: tps65217: Fix NULL pointer dereference on IRQ init failure
  dt-bindings: mfd: qcom,spmi-pmic: Add compatibles for pm4125-codec
  mfd: bq257xx: Mark self-modifying BQ25792 registers volatile
  dt-bindings: mfd: mediatek: mt6397: describe the RTC's nvmem layout
  mfd: mt6397-core: Add mt6397 AUXADC support
  mfd: max77705: Mark PASS2 revision as supported
  mfd: ab8500: Fix child device leaks on probe failure
  dt-bindings: mfd: Add MT6397 sound DAI cells
  dt-bindings: mfd: mediatek: mt6397: Add mt6323 PMIC EFUSE
  dt-bindings: mfd: hisilicon: Fix Hi6421 SPMI compatible
  dt-bindings: mfd: ti,bq25703a: Expand to include BQ25798
  dt-bindings: mfd: Allow MT6360 interrupt flags
  dt-bindings: mfd: mediatek: Allow MT6357 ADC
  ...

Pull devicetree updates from Rob Herring:

 - A bunch of improvements in dt-check-style. Fix various bindings based
   on these additional checks.

 - Convert hisilicon,hix5hd2-ir, hisilicon,hi6220-ade,
   hisilicon,hi6220-dsi, hisilicon,hip05-sas-v1, MediaTek RT5650 codecs,
   mediatek,g3dsys, mediatek,mt2701-scpsys, ti,omap-mpu, and
   ti,omap-ocp2scp to DT schema format

 - Add schemas for ST STM32MP2 DWC3 xHCI USB, ST STM32MP25 USB2-FEMTO
   PHY, spacemit,k1-gpu and spacemit,k3-gpu, HiSilicon local bus,
   HiSilicon HIP05 CPLD, SDMC DM2016, and QCom SM7250 and Kuno PDC

 - Various binding updates to fix schema warnings in .dts files

 - Drop obsolete .txt bindings for STM32(MP1) RCC, VExpress hwmon and
   regulator, and mailbox.txt

 - Remove the unused of_overlay_remove_all() function

 - Fixes for of_check_msi_parent()

 - Add "i2c-parent" tracking to fw_devlink

* tag 'devicetree-for-7.4' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (72 commits)
  dt-bindings: usb: dwc3: Document ST STM32MP2 DWC3 xHCI USB controller
  dt-bindings: iommu: Describe MT8195 infra IRQs
  dt-bindings: clock: mediatek: Add MT8516 fallbacks
  dt-bindings: media: Convert hisilicon,hix5hd2-ir to DT schema
  dt-bindings: display: Convert hisilicon,hi6220-ade to DT schema
  dt-bindings: display: Convert hisilicon,hi6220-dsi to DT schema
  dt-bindings: phy: Document ST STM32MP25 USB2-FEMTO PHY
  of: overlay: remove unused of_overlay_remove_all()
  dt-bindings: power: Convert mediatek,mt2701-scpsys to DT schema
  dt-bindings: bus: Add HiSilicon local bus
  dt-bindings: gpu: img,powervr-rogue: add spacemit,k1-gpu and spacemit,k3-gpu
  dt-bindings: interrupt-controller: qcom,pdc: Document SM7250 PDC
  dt-bindings: vendor-prefixes: add Ambarella
  dt-bindings: reset: Drop obsolete STM32(MP1) RCC bindings
  dt-bindings: arm: keystone: ti,sci: Correct reg and mboxes constraints
  dt-bindings: ASoC: Convert MediaTek RT5650 codecs bindings to DT schema
  dt-bindings: scsi: Convert hisilicon,hip05-sas-v1 to DT schema
  of/irq: Stop the MSI walk at the first msi-parent
  of/irq: Fix device node refcount leak in of_check_msi_parent()
  dt-bindings: display: faraday,tve200: Use a level-high interrupt
  ...

Pull pin control updates from Linus Walleij:
 "Nothing special really, some new drivers, the usual trickle of fixes.

  Oddly not even vary many LLM-assisted fixes, I guess they haven't
  found their way into this subsystem yet.

  Core changes:

   - Support input-debounce-ns pin config property.

  New drivers:

   - Qualcomm:
       - Hawi SoC TLMM and LPASS LPI TLMM
       - Kuno (ARM32!) SoC TLMM
       - MSM8952 SoC TLMM
       - PMAU0102 SPMIO GPIO

   - Starfive JHB100 SoC sys0, sys0h, sys1, sys2, per0, per1,
     per2 per2pok and per3 (apparently strongly modularized silicon)

   - Ambarella CV75

   - Apple T8140 SoC used in iPhone 16 [Pro] and MacBook Neo

   - Econet EN7528

   - Allwinner Sunxi A733

   - Mediatek MT6735

  Improvements:

   - Renesas RZ/3GL: SD channel PoC, I2C power source etc

   - The SCMI pin controller uses generic helpers for handling
     groups and functions"

* tag 'pinctrl-v7.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (106 commits)
  pinctrl: stm32: program the EXTI mux from .alloc instead of .activate
  pinctrl: stm32: Fix the unit of the hwspinlock timeout
  pinctrl: stm32: Fix fwnode reference leak in stm32_gpiolib_register_bank()
  dt-bindings: pinctrl: brcm,nsp-gpio: Convert to DT schema
  pinctrl: mediatek: Add MT6735 pinctrl driver
  dt-bindings: pinctrl: mediatek,mt6779-pinctrl: Add bindings for MT6735 pin controller
  dt-bindings: pinctrl: mediatek,mt6779-pinctrl: Document MT6765 pin controller
  dt-bindings: pinctrl: mediatek,mt6779-pinctrl: Add MT6795
  dt-bindings: pinctrl: mediatek,mt6779-pinctrl: Improve pinctrl subnode and property descriptions
  dt-bindings: pinctrl: mediatek,mt6779-pinctrl: Pull pinctrl node changes from MT6795 document
  pinctrl: tegra: xusb: free maps on DT map failure
  pinctrl: sprd: free maps on DT map failure
  pinctrl: kconfig: Select generic pinctrl helpers for scmi pinctrl
  pinctrl: scmi: Replace pinctrl ops get group info with generics
  pinctrl: scmi: Replace pinmux ops get function info with generics
  pinctrl: ambarella: fix NULL vs IS_ERR() bug in amb_pinctrl_register()
  pinctrl: starfive: fix missing CONFIG_OF dependencies
  pinctrl: ambarella: add CONFIG_OF dependency
  pinctrl: apple: Add t8140-pinctrl support
  dt-bindings: pinctrl: apple,pinctrl: Add t8140 compatible
  ...

Pull SoC devicetree updates from Arnd Bergmann:
 "This is a rather large update of over 1000 non-merge commits touching
  devicetree files and bindings.

  A few notable SoC were added this time:

   - Apple M4 and A18 Pro are used in laptops, these follow the M3 model
     added in 7.2.

   - Google Laguna (aka Tensor G5) is used last year's Pixel phone
     generation. Unlike the earlier Tensor chips, this is not based on
     Samsung's Exynos family design but starts a new chip family.

   - Qualcomm's Hawi and Nord SoCs are two powerful chips using the
     custom Oryon cores. Product names and applications are so far not
     known, which means that Qualcomm is doing something right by
     upstreaming kernel support early.

  The ST stm32mp23xc/stm32mp25xc SoC support was previously removed
  because there were no users upstream, but they are back now that
  boards have shown up. Renesas RZ/G2M v3.0 (R8A774A3) is just a minor
  variation of the already supported SoC.

  In total, there are 81 new dts files for individual boards, and they
  are all over the place. Only one riscv based machine is added, the
  Milk-V Meles SBC using the T-Head th1520 chip. For 32-bit Arm, we have
  13 new boards. About half are industrial embedded boards using NXP
  i.MX6/7 chips, the rest are older products: two Amazon tablets, two
  Motorola phones and two SoM boards.

  Everything else is 64-bit Arm:

   - many industrial embedded boards using NXP layerscape, NXP i.MX8/9,
     Qualcomm Hamoa, ST stm32mp2, Rockchip rk35xx, and Renesas RZ/G2
     SoCs

   - Laptops and tablets using Apple M4, Qualcomm Snapdragon X2,
     Snapdragon X1 Elite and Allwinner A133 chips

   - Valve Steam Frame VR headset using Snapdragon 8 Gen 3

   - Seven handheld game consoles using Qualcomm Dragonwing qcs8550

   - Mobile phones using Google Tensor G5, Samsung Exynos 850, and
     various Qualcomm Snapdragon chips

  Aside from the new stuff, there is still a lot going on for existing
  socs and boards, including GPU hardware support on MediaTek MT8173
  based laptops. Most patches actually add features this time, as the
  compile-time diagnostic changes are slowing down"

* tag 'soc-dt-7.4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (1022 commits)
  arm64: dts: rockchip: Add Radxa E54C
  dt-bindings: arm: rockchip: Add Radxa E54C
  arm64: dts: rockchip: remove FRL GPIO for 100ASK DshanPi A1
  arm64: dts: rockchip: fix M.2 E-key reset pinctrl on rk3588 rock-5-itx
  arm64: dts: rockchip: add pcie30phy data-lanes on rk3588 coolpi-cm5-evb
  arm64: dts: rockchip: Add the fan tachometers to Kobol Helios64
  arm64: dts: rockchip: enable NPU on Radxa E52C
  arm64: dts: rockchip: fix adc button voltage on Radxa E52C
  riscv: dts: sophgo: sg2002-milkv-duo256m: drop reserved memory node
  riscv: dts: sophgo: cv1800b-milkv-duo: drop reserved memory node
  arm64: dts: nuvoton: npcm845-evb: Add peripheral nodes
  arm64: dts: nuvoton: npcm845-evb: Fix DTS coding style
  arm64: dts: nuvoton: npcm845: Add peripheral nodes
  arm64: dts: nuvoton: npcm845: Split APB address ranges
  riscv: dts: sophgo: cv180x: Fix internal ephy node name
  riscv: dts: sophgo: add Milk-V Duo 256M ethernet support overlay
  riscv: dts: sophgo: Limit SG2042 SPI NOR to 12.5 MHz
  riscv: dts: sophgo: Enable SPI NOR on SRD3-10
  riscv: dts: spacemit: set ETH MAC from eeprom for OrangePi
  arm64: dts: allwinner: sun50i-h616: Add video engine
  ...

pinctrl-rk805.txt describes the pinmux controller that is part of the
Rockchip RK805 PMIC. The PMIC itself is already described by
rockchip,rk805.yaml, so the pinmux part belongs there as well: the
pinctrl node is a child of the PMIC node, not a separate device.

Fold the pinmux description into rockchip,rk805.yaml and drop the
standalone text binding.

While doing so, add the missing child node schema. The rockchip,rk805.yaml
schema ends with 'additionalProperties: false' but did not describe the pin
configuration child nodes at all, so a valid pinmux node like the one shown
in pinctrl-rk805.txt was rejected:

    pmic@18 (rockchip,rk805): 'rk805-default-pins' does not match any of
    the regexes: '^pinctrl-[0-9]+$'

The pin configuration nodes require 'pins'; without it a node that names
no pin is accepted silently, while the text binding it replaces listed
'pins' as required. The RK805 exposes two output-only GPIOs, so 'pins' is
an enum of gpio0 and gpio1 and a typo such as "gpio2" is caught.

The nodes may be direct children of the PMIC, or sit one level deeper
inside a "pinmux" grouping node, which is the layout the example of the
text binding used. pinctrl-bindings.txt allows the configuration nodes to
be grandchildren of the pin controller, and the driver reaches both
layouts: pinconf_generic_dt_node_to_map() parses the referenced node and
then walks its children. The example shows both.

The example also regains the gpio-controller and #gpio-cells lines that the
example of the text binding had.

Reported-by: Sashiko <sashiko-bot@kernel.org>
Link: https://sashiko.dev/#/patchset/20260923034245.396417-1-quchaosheng000406@163.com?part=1
Link: https://sashiko.dev/#/patchset/20260923062746.516666-1-quchaosheng000406@163.com?part=1
Link: https://sashiko.dev/#/patchset/20260923074337.575122-1-quchaosheng000406@163.com?part=1
Assisted-by: LLM
Signed-off-by: Quchaosheng <quchaosheng000406@163.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260923083001.606935-1-quchaosheng000406@163.com
Signed-off-by: Lee Jones <lee@kernel.org>

The brcm,nsp-gpio-a compatible used by the NSP GPIO controller was only
documented in the legacy text binding, so dtbs_check reported "failed to
match any schema" for the gpio@20 node in bcm-nsp.dtsi.

Convert the text binding to DT schema. Beyond a direct conversion:

- Require pin configuration nodes to use a '-pins' suffix and GPIO hogs
  a '-hog' suffix, as the old example used arbitrary node names. No
  in-tree DTS has child nodes under this controller, so nothing is
  affected.
- Document slew-rate, which the driver supports but the text binding
  never listed.
- Add #interrupt-cells and gpio-line-names, and make #interrupt-cells
  depend on interrupt-controller.

Assisted-by: LLM
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Linus Walleij <linusw@kernel.org>

Qualcomm pin control updates for v7.4-rc1

New drivers:
- add the TLMM drivers for Kuno and MSM8952
- add the LPASS LPI driver for Hawi

New model support:
- support PMAU0102 GPIO in pinctrl-spmi-gpio

Driver improvements:
- fix/unify naming convention in defines specific to Qualcomm pinctrl
  drivers
- extend debugfs verbosity for pinctrl-lpass-lpi
- make the return type from kcalloc() const in tlmm-test

Devicetree bindings:
- add binding documents for new drivers
- document compatibles for new models
- document the gpio-line-names property for qcom,sc8280xp-tlmm

Signed-off-by: Linus Walleij <linusw@kernel.org>

Add DT bindings for the MT6735 pin controller.

Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Linus Walleij <linusw@kernel.org>

The MT6765 pin controller has had a driver for a while, but DT
bindings were never documented for it.

Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>

Combine MT6795 pin controller document into MT6779 one. In the
process, amend the example with comments and additional pinctrl
nodes from the MT6795 example, replace the current interrupts
property description with the one from the MT6795 document since
it makes more sense and define its items using conditionals
as they now vary between variants. Also use conditionals to define
valid values for the drive-strength property as well as items of
the interrupts property for each variant since they are different
on MT6795.

Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Linus Walleij <linusw@kernel.org>