linux-toradex.git/Documentation/devicetree/bindings/powerpc, branch v3.11

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial

2013-07-04T18:40:58+00:00

Pull trivial tree updates from Jiri Kosina:
 "The usual stuff from trivial tree"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (34 commits)
  treewide: relase -> release
  Documentation/cgroups/memory.txt: fix stat file documentation
  sysctl/net.txt: delete reference to obsolete 2.4.x kernel
  spinlock_api_smp.h: fix preprocessor comments
  treewide: Fix typo in printk
  doc: device tree: clarify stuff in usage-model.txt.
  open firmware: "/aliasas" -> "/aliases"
  md: bcache: Fixed a typo with the word 'arithmetic'
  irq/generic-chip: fix a few kernel-doc entries
  frv: Convert use of typedef ctl_table to struct ctl_table
  sgi: xpc: Convert use of typedef ctl_table to struct ctl_table
  doc: clk: Fix incorrect wording
  Documentation/arm/IXP4xx fix a typo
  Documentation/networking/ieee802154 fix a typo
  Documentation/DocBook/media/v4l fix a typo
  Documentation/video4linux/si476x.txt fix a typo
  Documentation/virtual/kvm/api.txt fix a typo
  Documentation/early-userspace/README fix a typo
  Documentation/video4linux/soc-camera.txt fix a typo
  lguest: fix CONFIG_PAE -> CONFIG_x86_PAE in comment
  ...

powerpc: Add T4 LAC device tree binding & defs

2013-06-25T00:52:36+00:00

The Interlaken is a narrow, high speed channelized chip-to-chip interface. To
facilitate interoperability between a data path device and a look-aside
co-processor, the Interlaken Look-Aside protocol is defined for short
transaction-related transfers. Although based on the Interlaken protocol,
Interlaken Look-Aside is not directly compatible with Interlaken and can be
considered a different operation mode.

The Interlaken LA controller connects internal platform to Interlaken serial
interface. It accepts LA command through software portals, which are system
memory mapped 4KB spaces. The LA commands are then translated into the
Interlaken control words and data words, which are sent on TX side to TCAM
through SerDes lanes.

Signed-off-by: Joe Liccese 
Signed-off-by: Scott Wood

doc: fix misspellings with 'codespell' tool

2013-05-28T10:02:12+00:00

Signed-off-by: Anatol Pomozov 
Signed-off-by: Jiri Kosina

powerpc/e6500: Add architecture categories for e6500 cores

2013-03-05T23:10:02+00:00

-also define a binding for fsl,eref-* properties

Signed-off-by: Stuart Yoder 
Signed-off-by: Kumar Gala

Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

2013-02-24T01:09:55+00:00

Pull powerpc updates from Benjamin Herrenschmidt:
 "So from the depth of frozen Minnesota, here's the powerpc pull request
  for 3.9.  It has a few interesting highlights, in addition to the
  usual bunch of bug fixes, minor updates, embedded device tree updates
  and new boards:

   - Hand tuned asm implementation of SHA1 (by Paulus & Michael
     Ellerman)

   - Support for Doorbell interrupts on Power8 (kind of fast
     thread-thread IPIs) by Ian Munsie

   - Long overdue cleanup of the way we handle relocation of our open
     firmware trampoline (prom_init.c) on 64-bit by Anton Blanchard

   - Support for saving/restoring & context switching the PPR (Processor
     Priority Register) on server processors that support it.  This
     allows the kernel to preserve thread priorities established by
     userspace.  By Haren Myneni.

   - DAWR (new watchpoint facility) support on Power8 by Michael Neuling

   - Ability to change the DSCR (Data Stream Control Register) which
     controls cache prefetching on a running process via ptrace by
     Alexey Kardashevskiy

   - Support for context switching the TAR register on Power8 (new
     branch target register meant to be used by some new specific
     userspace perf event interrupt facility which is yet to be enabled)
     by Ian Munsie.

   - Improve preservation of the CFAR register (which captures the
     origin of a branch) on various exception conditions by Paulus.

   - Move the Bestcomm DMA driver from arch powerpc to drivers/dma where
     it belongs by Philippe De Muyter

   - Support for Transactional Memory on Power8 by Michael Neuling
     (based on original work by Matt Evans).  For those curious about
     the feature, the patch contains a pretty good description."

(See commit db8ff907027b: "powerpc: Documentation for transactional
memory on powerpc" for the mentioned description added to the file
Documentation/powerpc/transactional_memory.txt)

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (140 commits)
  powerpc/kexec: Disable hard IRQ before kexec
  powerpc/85xx: l2sram - Add compatible string for BSC9131 platform
  powerpc/85xx: bsc9131 - Correct typo in SDHC device node
  powerpc/e500/qemu-e500: enable coreint
  powerpc/mpic: allow coreint to be determined by MPIC version
  powerpc/fsl_pci: Store the pci ctlr device ptr in the pci ctlr struct
  powerpc/85xx: Board support for ppa8548
  powerpc/fsl: remove extraneous DIU platform functions
  arch/powerpc/platforms/85xx/p1022_ds.c: adjust duplicate test
  powerpc: Documentation for transactional memory on powerpc
  powerpc: Add transactional memory to pseries and ppc64 defconfigs
  powerpc: Add config option for transactional memory
  powerpc: Add transactional memory to POWER8 cpu features
  powerpc: Add new transactional memory state to the signal context
  powerpc: Hook in new transactional memory code
  powerpc: Routines for FP/VSX/VMX unavailable during a transaction
  powerpc: Add transactional memory unavaliable execption handler
  powerpc: Add reclaim and recheckpoint functions for context switching transactional memory processes
  powerpc: Add FP/VSX and VMX register load functions for transactional memory
  powerpc: Add helper functions for transactional memory context switching
  ...

powerpc/85xx: describe the PAMU topology in the device tree

2013-02-13T13:49:02+00:00

The PAMU caches use the LIODNs to determine which cache lines hold the
entries for the corresponding LIODs.  The LIODNs must therefore be
carefully assigned to avoid cache thrashing -- two active LIODs with
LIODNs that put them in the same cache line.

Currently, LIODNs are statically assigned by U-Boot, but this has
limitations.  LIODNs are assigned even for devices that may be disabled
or unused by the kernel.  Static assignments also do not allow for device
drivers which may know which LIODs can be used simultaneously.  In
other words, we really should assign LIODNs dynamically in Linux.

To do that, we need to describe the PAMU device and cache topologies in
the device trees.

Signed-off-by: Timur Tabi 
Acked-by: Stuart Yoder 
Acked-by: Scott Wood 
Signed-off-by: Kumar Gala

documentation/devicetree: Fix typos

2013-02-06T11:06:36+00:00

Correct spelling typos within Documentation/devicetree

Signed-off-by: Masanari Iida 
Signed-off-by: Grant Likely

powerpc/dma/raidengine: add raidengine device

2012-11-25T13:19:51+00:00

The RaidEngine is a new Freescale hardware that used for parity
computation offloading in RAID5/6.

This patch adds the device node in device tree and related binding
documentation.

Signed-off-by: Harninder Rai 
Signed-off-by: Naveen Burmi 
Signed-off-by: Xuelin Shi 
Signed-off-by: Kumar Gala

powerpc: Update Integrated Flash controller device tree bindings

2012-09-12T19:57:10+00:00

Freescale's Integrated Flash controller (IFC) may have one or two
interrupts. In case of single interrupt line, it will cover all IFC
interrupts.

Update this information in IFC device tree bindings

Signed-off-by: Prabhakar Kushwaha 
Signed-off-by: Kumar Gala

powerpc: document the FSL MPIC message register binding

2012-03-16T21:15:28+00:00

This binding documents how the message register blocks found in some FSL
MPIC implementations shall be represented in a device tree.

Signed-off-by: Meador Inge 
Signed-off-by: Jia Hongtao 
Signed-off-by: Kumar Gala