linux-toradex.git/Documentation/devicetree/bindings/powerpc, branch v3.2.62

powerpc/fsl_msi: add support for "msi-address-64" property

2011-10-14T07:54:29+00:00

Add support for the msi-address-64 property of a PCI node.  This property
specifies the PCI address of MSIIR (message signaled interrupt index
register).

In commit 3da34aae ("powerpc/fsl: Support unique MSI addresses per PCIe Root
Complex"), the msi_addr_hi/msi_addr_lo fields of struct fsl_msi were redefined
from an actual address to just an offset, but the fields were not renamed
accordingly.  These fields are replace with a single field, msiir_offset,
to reflect the new meaning.

Signed-off-by: Timur Tabi 
Signed-off-by: Kumar Gala

powerpc/85xx: Adding DCSR node to dtsi device trees

2011-10-12T04:47:29+00:00

Adding new device tree binding file for the DCSR node.  Modifying device
tree dtsi files to add DCSR node for P2041, P3041, P4080, & P5020.

Signed-off-by: Stephen George 
Signed-off-by: Kumar Gala

powerpc/85xx: clean up FPGA device tree nodes for Freecsale QorIQ boards

2011-10-12T04:47:24+00:00

Standarize and document the FPGA nodes used on Freescale QorIQ reference
boards.  There are different kinds of FPGAs used on the boards, but
only two are currently standard: "pixis", "ngpixis", and "qixis".  Although
there are minor differences among the boards that have one kind of FPGA, most
of the functionality is the same, so it makes sense to create common
compatibility strings.

We also need to update the P1022DS platform file, because the compatible
string for its PIXIS node has changed.  This means that older kernels are
not compatible with newer device trees.  This is not a real problem, however,
since that particular function doesn't work anyway.  When the DIU is active,
the PIXIS is in "indirect mode", and so cannot be accessed as a memory-mapped
device.

Signed-off-by: Timur Tabi 
Signed-off-by: Kumar Gala

dt: bindings: move SEC node under new crypto/

2011-07-07T19:51:19+00:00

Since technically it's not powerpc arch-specific.  Also rename it sec2
to differentiate it from its incompatible successor, the SEC 4.

Signed-off-by: Kim Phillips 
Signed-off-by: Grant Likely

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial

2011-05-23T16:12:26+00:00

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits)
  b43: fix comment typo reqest -> request
  Haavard Skinnemoen has left Atmel
  cris: typo in mach-fs Makefile
  Kconfig: fix copy/paste-ism for dell-wmi-aio driver
  doc: timers-howto: fix a typo ("unsgined")
  perf: Only include annotate.h once in tools/perf/util/ui/browsers/annotate.c
  md, raid5: Fix spelling error in comment ('Ofcourse' --> 'Of course').
  treewide: fix a few typos in comments
  regulator: change debug statement be consistent with the style of the rest
  Revert "arm: mach-u300/gpio: Fix mem_region resource size miscalculations"
  audit: acquire creds selectively to reduce atomic op overhead
  rtlwifi: don't touch with treewide double semicolon removal
  treewide: cleanup continuations and remove logging message whitespace
  ath9k_hw: don't touch with treewide double semicolon removal
  include/linux/leds-regulator.h: fix syntax in example code
  tty: fix typo in descripton of tty_termios_encode_baud_rate
  xtensa: remove obsolete BKL kernel option from defconfig
  m68k: fix comment typo 'occcured'
  arch:Kconfig.locks Remove unused config option.
  treewide: remove extra semicolons
  ...

powerpc: Integrated Flash controller device tree bindings

2011-05-19T06:45:07+00:00

Signed-off-by: Dipen Dudhat 
Acked-By: Scott Wood 
Signed-off-by: Kumar Gala

powerpc: Add fsl mpic timer binding

2011-05-19T06:14:25+00:00

Update the existing example in the general mpic binding to have a
separate TCRx region.  Currently the example doesn't describe TCRx at
all.  The one upstream device tree with an mpic timer node (p1022ds)
uses one large reg region to describe both, even though there are other
unrelated registers in between.  That device tree also contains a bogus
interrupt specifier, and there's no upstream software that uses this yet,
so changing this shouldn't be a problem.

Add a full binding for the MPIC timer node, not just an example of
4-cell interrupts in the MPIC binding.

Add fsl,available-ranges, similar to msi-available-ranges.

Signed-off-by: Scott Wood 
Signed-off-by: Kumar Gala

treewide: fix a few typos in comments

2011-05-10T08:16:21+00:00

- kenrel -> kernel
- whetehr -> whether
- ttt -> tt
- sss -> ss

Signed-off-by: Justin P. Mattock 
Signed-off-by: Jiri Kosina

Fix common misspellings

2011-03-31T14:26:23+00:00

Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi

powerpc/fsl: 85xx: document cache sram bindings

2011-03-15T19:09:06+00:00

Adds binding documentation for cache sram for the PQ3 and some QorIQ
based platforms.

Signed-off-by: Vivek Mahajan 
Signed-off-by: Kumar Gala