linux-toradex.git/Documentation/devicetree/bindings/soc/fsl, branch master Linux kernel for Apalis and Colibri modules dt-bindings: fsl: layerscape-dcfg: define DCFG_DCSR region 2026-08-07T04:54:23+00:00 Vladimir Oltean vladimir.oltean@nxp.com 2026-07-21T23:16:01+00:00 d1b710f463fc26081d37c56a85b15dfa25560e36 In Layerscape (Arm) and QorIQ (PowerPC) devices, hardware peripherals are accessed by the CPU through a portion of the SoC address space called CCSR ("Configuration, Control, and Status Registers"). All hardware IP blocks have their registers mapped here, and the Device Configuration block makes no exception. However, there exists a secondary range of the address space named DCSR ("Debug Control and Status Registers") which, like CCSR, also holds registers of hardware IP blocks, except the DCSR contents is hidden in all public reference manuals. The intention of the CCSR/DCSR split, to the best of my knowledge, was to place the functionality that is too low level for normal use, and which is necessary only for debug, in a completely separate address space which can be hidden. A use case has appeared where networking SerDes lanes need to be reconfigured at runtime for a different protocol (example: 10GBase-R to SGMII), and the architecture of the SoCs does not normally permit that. The Reset Configuration Word (RCW) is a data structure read by the SoC preboot loader (PBL) which contains stuff like pinmuxing and SerDes protocol mapping for each lane. The RCW that the PBL has loaded is visible in the DCFG block's normal status registers (from CCSR), as read only. Turns out, the RCW is also mapped in the DCFG's shadow register map (in DCSR), in a write-only form. Writing to the RCW registers from the DCFG's DCSR space to change what the PBL has loaded is called "RCW override". It has been validated that the RCW override procedure is necessary to reconfigure the networking data path when a SerDes lane performs a major protocol change. It changes some internal muxes which connect the PCS to either the 10G MAC or to the 1G MAC. Defining the DCSR area of the DCFG as a secondary 'reg' array element allows operating systems to perform RCW overrides. Since it is introduced late in the binding's lifetime, it is optional. It can be identified by name, but also by index (first 'reg' is CCSR). Note that while all SoCs should have a DCFG register block in DCSR, we only need to expose it for the SoCs where the RCW override procedure is known to be needed and has been validated. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20260721231603.67865-8-vladimir.oltean@nxp.com Signed-off-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org> 
In Layerscape (Arm) and QorIQ (PowerPC) devices, hardware peripherals
are accessed by the CPU through a portion of the SoC address space
called CCSR ("Configuration, Control, and Status Registers"). All
hardware IP blocks have their registers mapped here, and the Device
Configuration block makes no exception.

However, there exists a secondary range of the address space named DCSR
("Debug Control and Status Registers") which, like CCSR, also holds
registers of hardware IP blocks, except the DCSR contents is hidden in
all public reference manuals.

The intention of the CCSR/DCSR split, to the best of my knowledge, was
to place the functionality that is too low level for normal use, and
which is necessary only for debug, in a completely separate address
space which can be hidden.

A use case has appeared where networking SerDes lanes need to be
reconfigured at runtime for a different protocol (example: 10GBase-R to
SGMII), and the architecture of the SoCs does not normally permit that.
The Reset Configuration Word (RCW) is a data structure read by the SoC
preboot loader (PBL) which contains stuff like pinmuxing and SerDes
protocol mapping for each lane.

The RCW that the PBL has loaded is visible in the DCFG block's normal
status registers (from CCSR), as read only. Turns out, the RCW is also
mapped in the DCFG's shadow register map (in DCSR), in a write-only
form. Writing to the RCW registers from the DCFG's DCSR space to change
what the PBL has loaded is called "RCW override".

It has been validated that the RCW override procedure is necessary to
reconfigure the networking data path when a SerDes lane performs a major
protocol change. It changes some internal muxes which connect the PCS to
either the 10G MAC or to the 1G MAC.

Defining the DCSR area of the DCFG as a secondary 'reg' array element
allows operating systems to perform RCW overrides. Since it is
introduced late in the binding's lifetime, it is optional. It can be
identified by name, but also by index (first 'reg' is CCSR).

Note that while all SoCs should have a DCFG register block in DCSR, we
only need to expose it for the SoCs where the RCW override procedure is
known to be needed and has been validated.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20260721231603.67865-8-vladimir.oltean@nxp.com
Signed-off-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
dt-bindings: soc: fsl: qe: Convert QE GPIO to DT schema 2026-08-03T12:58:58+00:00 Christophe Leroy christophe.leroy@csgroup.eu 2026-07-08T10:15:16+00:00 b6a375b38c279a22149b08426e80a0947baa2eb2 Convert QE GPIO devicetree binding to DT schema. The old binding uses fsl,<chip>-qe-pario-bank because multiple MCP83XX SoC has support for these GPIO banks. The best practice is to list out every <chip> instead. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Paul Louvel <paul.louvel@bootlin.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Reviewed-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org> Link: https://lore.kernel.org/r/20260708-qe-pic-gpios-v2-3-1972044cfbd1@bootlin.com Signed-off-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org> 
Convert QE GPIO devicetree binding to DT schema. The old binding uses
fsl,<chip>-qe-pario-bank because multiple MCP83XX SoC has support for
these GPIO banks. The best practice is to list out every <chip> instead.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Paul Louvel <paul.louvel@bootlin.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Link: https://lore.kernel.org/r/20260708-qe-pic-gpios-v2-3-1972044cfbd1@bootlin.com
Signed-off-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
dt-bindings: Remove extra blank lines 2025-11-17T17:24:50+00:00 Rob Herring (Arm) robh@kernel.org 2025-10-23T14:37:56+00:00 0b2333183ade2bad21a7ed7b16b93d87d0a83043 Generally at most 1 blank line is the standard style for DT schema files. Remove the few cases with more than 1 so that the yamllint check for this can be enabled. Acked-by: Lee Jones <lee@kernel.org> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> # remoteproc Acked-by: Georgi Djakov <djakov@kernel.org> Acked-by: Vinod Koul <vkoul@kernel.org> Acked-by: Andi Shyti <andi.shyti@kernel.org> Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Acked-by: Jonathan Cameron <jonathan.cameron@huawei.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Uwe Kleine-König <ukleinek@kernel.org> # for allwinner,sun4i-a10-pwm.yaml Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> # mtd Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Manivannan Sadhasivam <mani@kernel.org> # For PCI controller bindings Link: https://patch.msgid.link/20251023143957.2899600-1-robh@kernel.org Signed-off-by: Rob Herring (Arm) <robh@kernel.org> 
Generally at most 1 blank line is the standard style for DT schema
files. Remove the few cases with more than 1 so that the yamllint check
for this can be enabled.

Acked-by: Lee Jones <lee@kernel.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> # remoteproc
Acked-by: Georgi Djakov <djakov@kernel.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Uwe Kleine-König <ukleinek@kernel.org> # for allwinner,sun4i-a10-pwm.yaml
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> # mtd
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Manivannan Sadhasivam <mani@kernel.org> # For PCI controller bindings
Link: https://patch.msgid.link/20251023143957.2899600-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
dt-bindings: soc: add vf610 reboot syscon controller 2025-09-03T14:01:25+00:00 Frank Li Frank.Li@nxp.com 2025-08-19T16:53:16+00:00 835bdddd028ff57afaee28eb5e4b260f714fd555 Add vf610 reboot controller, which used to reboot whole system. Fix below CHECK_DTB warnings: arch/arm/boot/dts/nxp/vf/vf610-bk4.dtb: /soc/bus@40000000/src@4006e000: failed to match any schema with compatible: ['fsl,vf610-src', 'syscon'] IC reference manual calls it as system reset controller(SRC), but it is not module as reset controller, which used to reset individual device. SRC works as reboot controller, which reboots whole system. It provides a syscon interface to syscon-reboot. Signed-off-by: Frank Li <Frank.Li@nxp.com> Link: https://lore.kernel.org/r/20250819165317.3739366-1-Frank.Li@nxp.com Signed-off-by: Rob Herring (Arm) <robh@kernel.org> 
Add vf610 reboot controller, which used to reboot whole system. Fix below
CHECK_DTB warnings:

arch/arm/boot/dts/nxp/vf/vf610-bk4.dtb: /soc/bus@40000000/src@4006e000:
    failed to match any schema with compatible: ['fsl,vf610-src', 'syscon']

IC reference manual calls it as system reset controller(SRC), but it is not
module as reset controller, which used to reset individual device. SRC
works as reboot controller, which reboots whole system. It provides a
syscon interface to syscon-reboot.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250819165317.3739366-1-Frank.Li@nxp.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Merge tag 'devicetree-for-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux 2025-07-29T17:57:58+00:00 Linus Torvalds torvalds@linux-foundation.org 2025-07-29T17:57:58+00:00 69f2970aad93758bea863432e49b564e0ba649ca Pull devicetree updates from Rob Herring: - Add bindings for arm,armv7m-nvic, fsl,icoll, fsl,imx23-digctl, Xilinx INTC, Analog Devices ADT7411, and a bunch of trivial hwmon devices - Convert fsl,vf610-mscm-ir, fsl,dsu, via,vt8500-timer, nxp,isp1301, Marvell Armada NETA and BM, apm,xgene1-msi, fsl,mpic-msi, himax,hx8357d, and sitronix,st7586 bindings to DT schema format - Fixes for some display bindings - More indentation clean-ups in examples - Add more guidelines and clarifications on writing bindings * tag 'devicetree-for-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (31 commits) dt-bindings: Correct indentation and style in DTS example dt-bindings: display: mediatek,dp: Allow DisplayPort AUX bus dt-bindings: fsl: convert fsl,vf610-mscm-ir.txt to yaml format dt-bindings: interrupt-controller: Add fsl,icoll.yaml dt-bindings: interrupt-controller: Add missing Xilinx INTC binding dt-bindings: display: sprd,sharkl3-dsi-host: Fix missing clocks constraints dt-bindings: display: sprd,sharkl3-dpu: Fix missing clocks constraints dt-bindings: display: imx: convert fsl,dcu.txt to yaml format dt-bindings: timer: via,vt8500-timer: Convert to YAML dt-bindings: net: Convert Marvell Armada NETA and BM to DT schema dt-bindings: trivial-devices: Add undocumented hwmon devices dt-bindings: interrupt-controller: Convert apm,xgene1-msi to DT schema dt-bindings: gpu: mali-bifrost: Add Allwinner A523 compatible docs: dt: writing-schema: Document preferred order of properties docs: dt: writing-bindings: Document discouraged instance IDs docs: dt: writing-bindings: Document compatible and filename naming docs: dt: submitting-patches: Avoid 'YAML' in the subject and add an example MAINTAINERS: adjust file entry in INTEL STRATIX10 FIRMWARE DRIVERS docs: dt: writing-bindings: Consistently use single-whitespace docs: dt: writing-bindings: Express better expectations of "specific" ... 
Pull devicetree updates from Rob Herring:

 - Add bindings for arm,armv7m-nvic, fsl,icoll, fsl,imx23-digctl, Xilinx
   INTC, Analog Devices ADT7411, and a bunch of trivial hwmon devices

 - Convert fsl,vf610-mscm-ir, fsl,dsu, via,vt8500-timer, nxp,isp1301,
   Marvell Armada NETA and BM, apm,xgene1-msi, fsl,mpic-msi,
   himax,hx8357d, and sitronix,st7586 bindings to DT schema format

 - Fixes for some display bindings

 - More indentation clean-ups in examples

 - Add more guidelines and clarifications on writing bindings

* tag 'devicetree-for-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (31 commits)
  dt-bindings: Correct indentation and style in DTS example
  dt-bindings: display: mediatek,dp: Allow DisplayPort AUX bus
  dt-bindings: fsl: convert fsl,vf610-mscm-ir.txt to yaml format
  dt-bindings: interrupt-controller: Add fsl,icoll.yaml
  dt-bindings: interrupt-controller: Add missing Xilinx INTC binding
  dt-bindings: display: sprd,sharkl3-dsi-host: Fix missing clocks constraints
  dt-bindings: display: sprd,sharkl3-dpu: Fix missing clocks constraints
  dt-bindings: display: imx: convert fsl,dcu.txt to yaml format
  dt-bindings: timer: via,vt8500-timer: Convert to YAML
  dt-bindings: net: Convert Marvell Armada NETA and BM to DT schema
  dt-bindings: trivial-devices: Add undocumented hwmon devices
  dt-bindings: interrupt-controller: Convert apm,xgene1-msi to DT schema
  dt-bindings: gpu: mali-bifrost: Add Allwinner A523 compatible
  docs: dt: writing-schema: Document preferred order of properties
  docs: dt: writing-bindings: Document discouraged instance IDs
  docs: dt: writing-bindings: Document compatible and filename naming
  docs: dt: submitting-patches: Avoid 'YAML' in the subject and add an example
  MAINTAINERS: adjust file entry in INTEL STRATIX10 FIRMWARE DRIVERS
  docs: dt: writing-bindings: Consistently use single-whitespace
  docs: dt: writing-bindings: Express better expectations of "specific"
  ...
Merge tag 'devicetree-fixes-for-6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux 2025-06-26T19:26:39+00:00 Linus Torvalds torvalds@linux-foundation.org 2025-06-26T19:26:39+00:00 f02769e7f272d6f42b9767f066c5a99afd2338f3 Pull devicetree fixes from Rob Herring: - Convert altr,uart-1.0 and altr,juart-1.0 to DT schema. These were applied for nios2, but never sent upstream. - Fix extra '/' in fsl,ls1028a-reset '$id' path - Fix warnings in ti,sn65dsi83 schema due to unnecessary $ref. * tag 'devicetree-fixes-for-6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: serial: Convert altr,uart-1.0 to DT schema dt-bindings: serial: Convert altr,juart-1.0 to DT schema dt-bindings: soc: fsl,ls1028a-reset: Drop extra "/" in $id dt-bindings: drm/bridge: ti-sn65dsi83: drop $ref to fix lvds-vod* warnings 
Pull devicetree fixes from Rob Herring:

 - Convert altr,uart-1.0 and altr,juart-1.0 to DT schema. These were
   applied for nios2, but never sent upstream.

 - Fix extra '/' in fsl,ls1028a-reset '$id' path

 - Fix warnings in ti,sn65dsi83 schema due to unnecessary $ref.

* tag 'devicetree-fixes-for-6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: serial: Convert altr,uart-1.0 to DT schema
  dt-bindings: serial: Convert altr,juart-1.0 to DT schema
  dt-bindings: soc: fsl,ls1028a-reset: Drop extra "/" in $id
  dt-bindings: drm/bridge: ti-sn65dsi83: drop $ref to fix lvds-vod* warnings
dt-bindings: soc: Add fsl,imx23-digctl.yaml for i.MX23 and i.MX28 2025-06-09T16:02:05+00:00 Frank Li Frank.Li@nxp.com 2025-05-28T18:35:48+00:00 28ddb755949b996637eb457759edff5de77a474d Add fsl,imx23-digctl.yaml for i.MX23 and i.MX28 to fix below CHECK_DTB warning: arch/arm/boot/dts/nxp/mxs/imx23-sansa.dtb: /apb@80000000/apbh-bus@80000000/digctl@8001c000: failed to match any schema with compatible: ['fsl,imx23-digctl'] Signed-off-by: Frank Li <Frank.Li@nxp.com> Link: https://lore.kernel.org/r/20250528183549.694434-1-Frank.Li@nxp.com Signed-off-by: Rob Herring (Arm) <robh@kernel.org> 
Add fsl,imx23-digctl.yaml for i.MX23 and i.MX28 to fix below CHECK_DTB
warning:

arch/arm/boot/dts/nxp/mxs/imx23-sansa.dtb: /apb@80000000/apbh-bus@80000000/digctl@8001c000:
    failed to match any schema with compatible: ['fsl,imx23-digctl']

Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250528183549.694434-1-Frank.Li@nxp.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
dt-bindings: soc: fsl,ls1028a-reset: Drop extra "/" in $id 2025-06-09T14:21:27+00:00 Rob Herring (Arm) robh@kernel.org 2025-05-07T21:59:02+00:00 d53fd59707c402d03ec740b4e90a2ddcb5312006 The $id value has a double "//". Drop it. Fixes: 9ca5a7d9d2e0 ("dt-bindings: soc: fsl: Add fsl,ls1028a-reset for reset syscon node") Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250507215903.2748698-1-robh@kernel.org Signed-off-by: Rob Herring (Arm) <robh@kernel.org> 
The $id value has a double "//". Drop it.

Fixes: 9ca5a7d9d2e0 ("dt-bindings: soc: fsl: Add fsl,ls1028a-reset for reset syscon node")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250507215903.2748698-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Merge tag 'devicetree-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux 2025-05-29T15:22:07+00:00 Linus Torvalds torvalds@linux-foundation.org 2025-05-29T15:22:07+00:00 bf373e4c786bfe989e637195252698f45b157a68 Pull devicetree updates from Rob Herring: "DT Bindings: - Convert all remaining interrupt-controller bindings to DT schema - Convert Rockchip CDN-DP and Freescale TCON, M4IF, TigerP, LDB, PPC PMC, imx-drm, and ftm-quaddec to DT schema - Add bindings for fsl,vf610-pit, fsl,ls1021a-wdt, sgx,vz89te, maxim,max30208, ti,lp8864, and fairphone,fp5-sndcard - Add top-level constraints for renesas,vsp1 and renesas,fcp - Add missing constraint in amlogic,pinctrl-a4 'group' nodes - Adjust the allowed properties for dwc3-xilinx, sony,imx219, pci-iommu, and renesas,dsi - Add EcoNet vendor prefix - Fix the reserved-memory.yaml in fsl,qman-fqd - Drop obsolete numa.txt and cpu-topology.txt which are schemas in dtschema now - Drop Renesas RZ/N1S bindings - Ensure Arm cpu nodes don't allow undocumented properties. Add all the properties which are in use and undocumented. Drop the Mediatek cpufreq binding which is not a binding, but just what DT properties the driver uses. - Add compatibles for Renesas RZ/G3E and RZ/V2N Mali Bifrost GPU - Update documentation on defining child nodes with separate schemas - Add bindings to PSCI MAINTAINERS entry DT core: - Add new functions to simplify driver handling of 'memory-region' properties. Users to be added next cycle. - Simplify of_dma_set_restricted_buffer() to use of_for_each_phandle() - Add missing unlock on error in unittest_data_add()" * tag 'devicetree-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (87 commits) dt-bindings: timer: Add fsl,vf610-pit.yaml dt-bindings: gpu: mali-bifrost: Add compatible for RZ/G3E SoC ASoC: dt-bindings: qcom,sm8250: Add Fairphone 5 sound card dt-bindings: arm/cpus: Allow 2 power-domains entries dt-bindings: usb: dwc3-xilinx: allow dma-coherent media: dt-bindings: sony,imx219: Allow props from video-interface-devices dt-bindings: soundwire: qcom: Document v2.1.0 version of IP block dt-bindings: watchdog: fsl-imx-wdt: add compatible string fsl,ls1021a-wdt dt-bindings: pinctrl: amlogic,pinctrl-a4: Add missing constraint on allowed 'group' node properties dt-bindings: display: rockchip: Convert cdn-dp-rockchip.txt to yaml dt-bindings: display: bridge: renesas,dsi: allow properties from dsi-controller dt-bindings: trivial-devices: Add VZ89TE to trivial media: dt-bindings: renesas,vsp1: add top-level constraints media: dt-bindings: renesas,fcp: add top-level constraints dt-bindings: trivial-devices: Add Maxim max30208 dt-bindings: soc: fsl,qman-fqd: Fix reserved-memory.yaml reference dt-bindings: interrupt-controller: Convert ti,omap-intc-irq to DT schema dt-bindings: interrupt-controller: Convert ti,omap4-wugen-mpu to DT schema dt-bindings: interrupt-controller: Convert ti,keystone-irq to DT schema dt-bindings: interrupt-controller: Convert technologic,ts4800-irqc to DT schema ... 
Pull devicetree updates from Rob Herring:
 "DT Bindings:

   - Convert all remaining interrupt-controller bindings to DT schema

   - Convert Rockchip CDN-DP and Freescale TCON, M4IF, TigerP, LDB, PPC
     PMC, imx-drm, and ftm-quaddec to DT schema

   - Add bindings for fsl,vf610-pit, fsl,ls1021a-wdt, sgx,vz89te,
     maxim,max30208, ti,lp8864, and fairphone,fp5-sndcard

   - Add top-level constraints for renesas,vsp1 and renesas,fcp

   - Add missing constraint in amlogic,pinctrl-a4 'group' nodes

   - Adjust the allowed properties for dwc3-xilinx, sony,imx219,
     pci-iommu, and renesas,dsi

   - Add EcoNet vendor prefix

   - Fix the reserved-memory.yaml in fsl,qman-fqd

   - Drop obsolete numa.txt and cpu-topology.txt which are schemas in
     dtschema now

   - Drop Renesas RZ/N1S bindings

   - Ensure Arm cpu nodes don't allow undocumented properties. Add all
     the properties which are in use and undocumented. Drop the Mediatek
     cpufreq binding which is not a binding, but just what DT properties
     the driver uses.

   - Add compatibles for Renesas RZ/G3E and RZ/V2N Mali Bifrost GPU

   - Update documentation on defining child nodes with separate schemas

   - Add bindings to PSCI MAINTAINERS entry

  DT core:

   - Add new functions to simplify driver handling of 'memory-region'
     properties. Users to be added next cycle.

   - Simplify of_dma_set_restricted_buffer() to use
     of_for_each_phandle()

   - Add missing unlock on error in unittest_data_add()"

* tag 'devicetree-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (87 commits)
  dt-bindings: timer: Add fsl,vf610-pit.yaml
  dt-bindings: gpu: mali-bifrost: Add compatible for RZ/G3E SoC
  ASoC: dt-bindings: qcom,sm8250: Add Fairphone 5 sound card
  dt-bindings: arm/cpus: Allow 2 power-domains entries
  dt-bindings: usb: dwc3-xilinx: allow dma-coherent
  media: dt-bindings: sony,imx219: Allow props from video-interface-devices
  dt-bindings: soundwire: qcom: Document v2.1.0 version of IP block
  dt-bindings: watchdog: fsl-imx-wdt: add compatible string fsl,ls1021a-wdt
  dt-bindings: pinctrl: amlogic,pinctrl-a4: Add missing constraint on allowed 'group' node properties
  dt-bindings: display: rockchip: Convert cdn-dp-rockchip.txt to yaml
  dt-bindings: display: bridge: renesas,dsi: allow properties from dsi-controller
  dt-bindings: trivial-devices: Add VZ89TE to trivial
  media: dt-bindings: renesas,vsp1: add top-level constraints
  media: dt-bindings: renesas,fcp: add top-level constraints
  dt-bindings: trivial-devices: Add Maxim max30208
  dt-bindings: soc: fsl,qman-fqd: Fix reserved-memory.yaml reference
  dt-bindings: interrupt-controller: Convert ti,omap-intc-irq to DT schema
  dt-bindings: interrupt-controller: Convert ti,omap4-wugen-mpu to DT schema
  dt-bindings: interrupt-controller: Convert ti,keystone-irq to DT schema
  dt-bindings: interrupt-controller: Convert technologic,ts4800-irqc to DT schema
  ...
dt-bindings: soc: fsl,qman-fqd: Fix reserved-memory.yaml reference 2025-05-13T21:20:06+00:00 Rob Herring (Arm) robh@kernel.org 2025-05-07T15:42:31+00:00 1090c38bbfd9ab7f22830c0e8a5c605e7d4ef084 The reserved-memory.yaml reference needs the full path. No warnings were generated because the example has the wrong compatible string, so fix that too. Fixes: 304a90c4f75d ("dt-bindings: soc: fsl: Convert q(b)man-* to yaml format") Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20250507154231.1590634-1-robh@kernel.org Signed-off-by: Rob Herring (Arm) <robh@kernel.org> 
The reserved-memory.yaml reference needs the full path. No warnings were
generated because the example has the wrong compatible string, so fix
that too.

Fixes: 304a90c4f75d ("dt-bindings: soc: fsl: Convert q(b)man-* to yaml format")
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250507154231.1590634-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>