linux-toradex.git/Documentation/devicetree/bindings/timer, branch v3.14.3

Merge tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2014-01-24T02:45:38+00:00

Pull ARM SoC DT updates from Olof Johansson:
 "DT and DT-conversion-related changes for various ARM platforms.  Most
  of these are to enable various devices on various boards, etc, and not
  necessarily worth enumerating.

  New boards and systems continue to come in as new devicetree files
  that don't require corresponding C changes any more, which is
  indicating that the system is starting to work fairly well.

  A few things worth pointing out:

   * ST Ericsson ux500 platforms have made the major push to move over
     to fully support the platform with DT
   * Renesas platforms continue their conversion over from legacy
     platform devices to DT-based for hardware description"

* tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (327 commits)
  ARM: dts: SiRF: add pin group for USP0 with only RX or TX frame sync
  ARM: dts: SiRF: add lost usp1_uart_nostreamctrl pin group for atlas6
  ARM: dts: sirf: add lost minigpsrtc device node
  ARM: dts: sirf: add clock, frequence-voltage table for CPU0
  ARM: dts: sirf: add lost bus_width, clock and status for sdhci
  ARM: dts: sirf: add lost clocks for cphifbg
  ARM: dts: socfpga: add pl330 clock
  ARM: dts: socfpga: update L2 tag and data latency
  arm: sun7i: cubietruck: Enable the i2c controllers
  ARM: dts: add support for EXYNOS4412 based TINY4412 board
  ARM: dts: Add initial support for Arndale Octa board
  ARM: bcm2835: add USB controller to device tree
  ARM: dts: MSM8974: Add MMIO architected timer node
  ARM: dts: MSM8974: Add restart node
  ARM: dts: sun7i: external clock outputs
  ARM: dts: sun7i: Change 32768 Hz oscillator node name to clk@N style
  ARM: dts: sun7i: Add pin muxing options for clock outputs
  ARM: dts: sun7i: Add rtp controller node
  ARM: dts: sun5i: Add rtp controller node
  ARM: dts: sun4i: Add rtp controller node
  ...

Merge tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2014-01-24T02:36:55+00:00

Pull ARM SoC cleanups from Olof Johansson:
 "This is the branch where we usually queue up cleanup efforts, moving
  drivers out of the architecture directory, header file restructuring,
  etc.  Sometimes they tangle with new development so it's hard to keep
  it strictly to cleanups.

  Some of the things included in this branch are:

   * Atmel SAMA5 conversion to common clock
   * Reset framework conversion for tegra platforms
    - Some of this depends on tegra clock driver reworks that are shared
      with Mike Turquette's clk tree.
   * Tegra DMA refactoring, which are shared branches with the DMA tree.
   * Removal of some header files on exynos to prepare for
     multiplatform"

* tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (169 commits)
  ARM: mvebu: move Armada 370/XP specific definitions to armada-370-xp.h
  ARM: mvebu: remove prototypes of non-existing functions from common.h
  ARM: mvebu: move ARMADA_XP_MAX_CPUS to armada-370-xp.h
  serial: sh-sci: Rework baud rate calculation
  serial: sh-sci: Compute overrun_bit without using baud rate algo
  serial: sh-sci: Remove unused GPIO request code
  serial: sh-sci: Move overrun_bit and error_mask fields out of pdata
  serial: sh-sci: Support resources passed through platform resources
  serial: sh-sci: Don't check IRQ in verify port operation
  serial: sh-sci: Set the UPF_FIXED_PORT flag
  serial: sh-sci: Remove duplicate interrupt check in verify port op
  serial: sh-sci: Simplify baud rate calculation algorithms
  serial: sh-sci: Remove baud rate calculation algorithm 5
  serial: sh-sci: Sort headers alphabetically
  ARM: EXYNOS: Kill exynos_pm_late_initcall()
  ARM: EXYNOS: Consolidate selection of PM_GENERIC_DOMAINS for Exynos4
  ARM: at91: switch Calao QIL-A9260 board to DT
  clk: at91: fix pmc_clk_ids data type attriubte
  PM / devfreq: use inclusion  instead of 
  ARM: EXYNOS: remove  for exynos
  ...

Merge branch 'tegra/dma-reset-rework' into next/dt

2013-12-26T19:03:29+00:00

Bringing in the tegra dma/reset framework cleanup as a base for the DT changes.

* tegra/dma-reset-rework: (320 commits)
  spi: tegra: checking for ERR_PTR instead of NULL
  ASoC: tegra: update module reset list for Tegra124
  clk: tegra: remove bogus PCIE_XCLK
  clk: tegra: remove legacy reset APIs
  ARM: tegra: remove legacy DMA entries from DT
  ARM: tegra: remove legacy clock entries from DT
  USB: EHCI: tegra: use reset framework
  Input: tegra-kbc - use reset framework
  serial: tegra: convert to standard DMA DT bindings
  serial: tegra: use reset framework
  spi: tegra: convert to standard DMA DT bindings
  spi: tegra: use reset framework
  staging: nvec: use reset framework
  i2c: tegra: use reset framework
  ASoC: tegra: convert to standard DMA DT bindings
  ASoC: tegra: allocate AHUB FIFO during probe() not startup()
  ASoC: tegra: call pm_runtime APIs around register accesses
  ASoC: tegra: use reset framework
  dma: tegra: register as an OF DMA controller
  dma: tegra: use reset framework
  ...

Signed-off-by: Olof Johansson

Documentation: devicetree: Update Exynos MCT bindings description

2013-12-20T23:24:37+00:00

This patch updates description of device tree bindings for Exynos MCT
(multicore timers). Namely:
 - added note about simplified specification of local timer interrupts,
   when using single per-processor interrupt for all local timers,
 - changed first example that was incorrectly suggesting that global
   timer interrupts are optional,
 - simplified example interrupt map,
 - added example showing simplified local timer interrupt specification.

Signed-off-by: Tomasz Figa 
Acked-by: Kyungmin Park 
Reviewed-by: Sylwester Nawrocki 
Signed-off-by: Kukjin Kim

ARM: tegra: add missing clock documentation to DT bindings

2013-12-11T23:41:55+00:00

Many of the Tegra DT binding documents say nothing about the clocks or
clock-names properties, yet those are present and required in DT files.
This patch simply updates the documentation file to match the implicit
definition of the binding, based on real-world DT content.

All Tegra bindings that mention clocks are updated to have consistent
wording and formatting of the clock-related properties.

Signed-off-by: Stephen Warren 
Acked-By: Terje Bergstrom

clocksource: Add Allwinner SoCs HS timers driver

2013-12-11T10:37:50+00:00

Most of the Allwinner SoCs (at this time, all but the A10) also have a
High Speed timers that are not using the 24MHz oscillator as a source
but rather the AHB clock running much faster.

The IP is slightly different between the A10s/A13 and the one used in
the A20/A31, since the latter have 4 timers available, while the former
have only 2 of them.

[dlezcano] : Fixed conflict with b788beda "Order Kconfig options
		alphabetically"

Signed-off-by: Maxime Ripard 
Tested-by: Emilio López 
Signed-off-by: Daniel Lezcano

clocksource: Provide timekeeping for efm32 SoCs

2013-10-22T20:36:33+00:00

An efm32 features 4 16-bit timers with a 10-bit prescaler. This driver
provides clocksource and clock event device using one timer instance
each.

Signed-off-by: Uwe Kleine-König 
Signed-off-by: Daniel Lezcano

clocksource: armada-370-xp: Add detailed clock requirements in devicetree binding

2013-09-02T19:44:58+00:00

Specifies the required clock inputs for each supported compatible.
Armada 370 requires a single clock phandle, and Armada XP requires
two clock phandles with clock-names "nbclk" and "fixed".

Cc: devicetree@vger.kernel.org
Signed-off-by: Ezequiel Garcia 
Signed-off-by: Daniel Lezcano 
Acked-by: Jason Cooper 
Acked-by: Stephen Warren 
Acked-by: Gregory CLEMENT

clocksource: armada-370-xp: Fix device-tree binding

2013-09-02T19:44:06+00:00

This commit fixes the DT binding for the Armada 370/XP SoC timer.
The previous "marvell,armada-370-xp-timer" compatible is removed and
two new compatible strings are introduced: "marvell,armada-xp-timer"
and "marvell,armada-370-timer".

The rationale behind this change is that the Armada 370 SoC and the
Armada XP SoC timers are not really compatible:

  * Armada 370 has no 25 MHz fixed timer.

  * Armada XP cannot work properly without such 25 MHz fixed timer
    as doing otherwise leads to using a clocksource whose frequency
    varies when doing cpufreq frequency changes.

This commit also removes the "marvell,timer-25Mhz" property, given
it's now meaningless.

Cc: devicetree@vger.kernel.org
Acked-by: Jason Cooper 
Reviewed-by: Andrew Lunn 
Signed-off-by: Ezequiel Garcia 
Signed-off-by: Daniel Lezcano

ARM: clocksource: moxart: documentation: Update device tree bindings document

2013-07-31T23:13:35+00:00

1. describe compatible variable "Must be" instead of "Should be".
2. change description so it's from the point of view of the device

Signed-off-by: Jonas Jensen 
Signed-off-by: Daniel Lezcano