Pull SoC DT updates from Arnd Bergmann:
 "There are a couple new SoCs that are supported for the first time:

   - AMD Pensando Elba is a data processing unit based on Cortex-A72 CPU
     cores

   - Sophgo makes RISC-V based chips, and we now support the CV1800B
     chip used in the milkv-duo board and the massive sg2042 chip in the
     milkv-pioneer, a 64-core developer workstation.

   - Qualcomm Snapdragon 720G (sm7125) is a close relative of Snapdragon
     7c and gets added with some Xiaomi phones

   - Renesas gains support for the R8A779F4 (R-Car S4-8) automotive SoC
     and the RZ/G3S (R9A08G045) embedded SoC.

  There are also a bunch of newly supported machines that use already
  supported chips. On the 32-bit side, we have:

   - USRobotics USR8200 is a NAS/Firewall/router based on the ancient
     Intel IXP4xx platform

   - A couple of machines based on the NXP i.MX5 and i.MX6 platforms

   - One machine each for Allwinner V3s, Aspeed AST2600, Microchip
     sama5d29 and ST STM32mp157

  The other ones all use arm64 cores on chips from allwinner, amlogic,
  freescale, mediatek, qualcomm and rockchip"

* tag 'soc-dt-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (641 commits)
  ARM: dts: BCM5301X: Set switch ports for Linksys EA9200
  ARM: dts: BCM5301X: Set fixed-link for extra Netgear R8000 CPU ports
  ARM: dts: BCM5301X: Explicitly disable unused switch CPU ports
  ARM: dts: BCM5301X: Relicense Vivek's code to the GPL 2.0+ / MIT
  ARM: dts: BCM5301X: Relicense Felix's code to the GPL 2.0+ / MIT
  ARM: dts: BCM5301X: Set MAC address for Asus RT-AC87U
  arm64: dts: socionext: add missing cache properties
  riscv: dts: thead: convert isa detection to new properties
  arm64: dts: Update cache properties for socionext
  arm64: dts: ti: k3-am654-idk: Add ICSSG Ethernet ports
  arm64: dts: ti: k3-am654-icssg2: add ICSSG2 Ethernet support
  arm64: dts: ti: k3-am65-main: Add ICSSG IEP nodes
  arm64: dts: ti: k3-am62p5-sk: Updates for SK EVM
  arm64: dts: ti: k3-am62p: Add nodes for more IPs
  arm64: dts: rockchip: Add Turing RK1 SoM support
  dt-bindings: arm: rockchip: Add Turing RK1
  dt-bindings: vendor-prefixes: add turing
  arm64: dts: rockchip: Add DFI to rk3588s
  arm64: dts: rockchip: Add DFI to rk356x
  arm64: dts: rockchip: Always enable DFI on rk3399
  ...

Pull devicetree updates from Rob Herring:

 - Add a kselftest to check for unprobed DT devices

 - Fix address translation for some 3 address cells cases

 - Refactor firmware node refcounting for AMBA bus

 - Add bindings for qcom,sm4450-pdc, Qualcomm Kryo 465 CPU, and
   Freescale QMC HDLC

 - Add Marantec vendor prefix

 - Convert qcom,pm8921-keypad, cnxt,cx92755-wdt, da9062-wdt, and
   atmel,at91rm9200-wdt bindings to DT schema

 - Several additionalProperties/unevaluatedProperties on child node
   schemas fixes

 - Drop reserved-memory bindings which now live in dtschema project

 - Fix a reference to rockchip,inno-usb2phy.yaml

 - Remove backlight nodes from display panel examples

 - Expand example for using DT_SCHEMA_FILES

 - Merge simple LVDS panel bindings to one binding doc

* tag 'devicetree-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (34 commits)
  dt-bindings: soc: fsl: cpm_qe: cpm1-scc-qmc: Add support for QMC HDLC
  dt-bindings: soc: fsl: cpm_qe: cpm1-scc-qmc: Add 'additionalProperties: false' in child nodes
  dt-bindings: soc: fsl: cpm_qe: cpm1-scc-qmc: Fix example property name
  dt-bindings: arm,coresight-cti: Add missing additionalProperties on child nodes
  dt-bindings: arm,coresight-cti: Drop type for 'cpu' property
  dt-bindings: soundwire: Add reference to soundwire-controller.yaml schema
  dt-bindings: input: syna,rmi4: Make "additionalProperties: true" explicit
  media: dt-bindings: ti,ds90ub960: Add missing type for "i2c-alias"
  dt-bindings: input: qcom,pm8921-keypad: convert to YAML format
  of: overlay: unittest: overlay_bad_unresolved: Spelling s/ok/okay/
  of: address: Consolidate bus .map() functions
  of: address: Store number of bus flag cells rather than bool
  of: unittest: Add tests for address translations
  of: address: Remove duplicated functions
  of: address: Fix address translation when address-size is greater than 2
  dt-bindings: watchdog: cnxt,cx92755-wdt: convert txt to yaml
  dt-bindings: watchdog: da9062-wdt: convert txt to yaml
  dt-bindings: watchdog: fsl,scu-wdt: Document imx8dl
  dt-bindings: watchdog: atmel,at91rm9200-wdt: convert txt to yaml
  dt-bindings: usb: rockchip,dwc3: update inno usb2 phy binding name
  ...

Pull thermal control updates from Rafael Wysocki:
 "These further rework the ACPI thermal driver, after the changes made
  to it in the previous cycle, to make it easier to grasp, get rid of
  redundant pieces of internal data structures and eliminate its
  reliance on a specific ordering of trip point objects in the thermal
  core, make thermal core adjustments needed for the ACPI thermal driver
  rework, modify the thermal governor interface so as to use trip
  pointers for representing trip points in it, switch over multiple
  thermal drivers to using void platform driver remove callbacks, add
  support for 2 hardware features to the Intel int340x thermal driver,
  add support for new hardware on ARM platforms, update documentation,
  fix problems, clean up code and update the MAINTAINERS record for
  thermal control.

  Specifics:

   - Untangle the initialization and updates of passive and active trip
     points in the ACPI thermal driver (Rafael Wysocki)

   - Reduce code duplication related to the initialization and updates
     of trip points in the ACPI thermal driver (Rafael Wysocki)

   - Use trip pointers for cooling device binding in the ACPI thermal
     driver (Rafael Wysocki)

   - Simplify critical and hot trips representation in the ACPI thermal
     driver (Rafael Wysocki)

   - Use trip pointers in thermal governors and in the related part of
     the thermal core (Rafael Wysocki)

   - Drop the trips_disabled bitmask that has become redundant from the
     thermal core (Rafael Wysocki)

   - Avoid updating trip points when the thermal zone temperature falls
     into a trip point's hysteresis range (ícolas F. R. A. Prado)

   - Add power floor notifications support to the int340x thermal
     control driver (Srinivas Pandruvada)

   - Rework updating trip points in the int340x thermal driver so that
     it does not access thermal zone internals directly (Rafael
     Wysocki)

   - Use param_get_byte() instead of param_get_int() as the max_idle
     module parameter .get() callback in the Intel powerclamp thermal
     driver to avoid possible out-of-bounds access (David Arcari)

   - Add workload hints support to the int340x thermal driver (Srinivas
     Pandruvada)

   - Add support for Mediatek LVTS MT8192 along with suspend/resume
     routines (Balsam Chihi)

   - Fix probe for THERMAL_V2 in the Mediatek LVTS driver (Markus
     Schneider-Pargmann)

   - Remove duplicate error message from the max76620 driver when
     thermal_of_zone_register() fails (Thierry Reding)

   - Add i.MX7D compatible bindings to fix a warning from dtbs_check for
     the imx6ul platform (Alexander Stein)

   - Add sa8775p compatible to the QCom tsens driver (Priyansh Jain)

   - Fix error check in lvts_debugfs_init() to be against PTR_ERR() in
     the LVTS Mediatek driver (Minjie Du)

   - Remove unused variable in thermal/tools (Kuan-Wei Chiu)

   - Document the imx8dl thermal sensor (Fabio Estevam)

   - Add variable names in callback prototypes to prevent warning from
     checkpatch.pl in the imx8mm driver (Bragatheswaran Manickavel)

   - Add missing unevaluatedProperties on child node schemas for
     tegra124 (Rob Herring)

   - Add mt7988 support to the Mediatek LVTS driver (Frank Wunderlich)"

* tag 'thermal-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (111 commits)
  thermal: ACPI: Include the right header file
  thermal: core: Don't update trip points inside the hysteresis range
  thermal: core: Pass trip pointer to governor throttle callback
  thermal: gov_step_wise: Fold update_passive_instance() into its caller
  thermal: gov_power_allocator: Use trip pointers instead of trip indices
  thermal: gov_fair_share: Rearrange get_trip_level()
  thermal: trip: Define for_each_trip() macro
  thermal: trip: Simplify computing trip indices
  thermal/qcom/tsens: Drop ops_v0_1
  thermal/drivers/mediatek/lvts_thermal: Update calibration data documentation
  thermal/drivers/mediatek/lvts_thermal: Add mt8192 support
  thermal/drivers/mediatek/lvts_thermal: Add suspend and resume
  dt-bindings: thermal: mediatek: Add LVTS thermal controller definition for mt8192
  thermal/drivers/mediatek: Fix probe for THERMAL_V2
  thermal/drivers/max77620: Remove duplicate error message
  dt-bindings: timer: add imx7d compatible
  dt-bindings: net: microchip: Allow nvmem-cell usage
  dt-bindings: imx-thermal: Add #thermal-sensor-cells property
  dt-bindings: thermal: tsens: Add sa8775p compatible
  thermal/drivers/mediatek/lvts_thermal: Fix error check in lvts_debugfs_init()
  ...

Since commit bad3db104f89 ("ARM: imx: source gpt per clk from OSC for
system timer") osc_per can be used for clocking the GPT which is not
scaled when entering low bus mode.
This clock source is available only on i.MX6Q (incl. i.MX6QP) and i.MX6DL.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230810144451.1459985-7-alexander.stein@ew.tq-group.com
Signed-off-by: Rob Herring <robh@kernel.org>

Currently the dtbs_check for imx6ul generates warnings like this:

['fsl,imx7d-gpt', 'fsl,imx6sx-gpt'] is too long

The driver has no special handling for fsl,imx7d-gpt, so fsl,imx6sx-gpt is
used. Therefore make imx7d GPT compatible to the imx6sx one to fix the
warning.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20231012080033.2715241-4-alexander.stein@ew.tq-group.com

Add device tree bindings for the Cirrus Logic EP93xx timer block
used in these SoCs.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230915-ep93xx-v4-11-a1d779dcec10@maquefel.me

Add MTU3a binding documentation for Renesas RZ/{G2UL,Five} SoCs.

MTU3a block is identical to one found on RZ/G2L, so no driver changes are
required. The fallback compatible string "renesas,rz-mtu3" will be used
on RZ/{G2UL,Five}.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230727081848.100834-4-biju.das.jz@bp.renesas.com

Fix the documentation issues pointed by Pavel while backporting
it to 6.1.y-cip.
 - Replace '32- bit'->'32-bit'
 - Consistently remove '.' at the end of line for the specifications
 - Replace '          (excluding MTU8)'-> '(excluding MTU8)'

Reported-by: Pavel Machek <pavel@denx.de>
Closes: https://lore.kernel.org/all/ZH79%2FUjgYg+0Ruiu@duo.ucw.cz
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230727081848.100834-3-biju.das.jz@bp.renesas.com

As per R01UH0914EJ0130 Rev.1.30 HW manual the MTU3 overflow/underflow
interrupt names starts with 'tci' instead of 'tgi'.

Fix this documentation issue by replacing below overflow/underflow
interrupt names:
 - tgiv0->tciv0
 - tgiv1->tciv1
 - tgiu1->tciu1
 - tgiv2->tciv2
 - tgiu2->tciu2
 - tgiv3->tciv3
 - tgiv4->tciv4
 - tgiv6->tciv6
 - tgiv7->tciv7
 - tgiv8->tciv8
 - tgiu8->tciu8

Fixes: 0a9d6b54297e ("dt-bindings: timer: Document RZ/G2L MTU3a bindings")
Cc: stable@kernel.org
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230727081848.100834-2-biju.das.jz@bp.renesas.com

Add compatible string for the SOPHGO CV1800B clint.

Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>