linux-toradex.git/Documentation/devicetree/bindings/watchdog, branch v4.6-rc5 Linux kernel for Apalis and Colibri modules Merge tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc 2016-03-20T22:26:57+00:00 Linus Torvalds torvalds@linux-foundation.org 2016-03-20T22:26:57+00:00 915c56bc01d6eab071e0dd1c6ea3bf73fbe5124f Pull ARM 64-bit DT updates from Arnd Bergmann: "The arm64 device tree changes make up an increasing portion of the overall changes, so they are kept separate from the 32-bit devicetree changes and from the other arm64 updates. Newly added SoCs and boards are: - 96Boards Husky board - AMD Overdrive board - Amlogic S905 SoC and related Tronsmart boxes - Annapurna Labs Alpine family and development board - Broadcom Vulcan servers - Broadcom Northstar 2 SoC - Marvell Armada 3700 family and development board - Qualcomm MSM8996 SoC Additional devices are enabled for existing platforms from Applied Micro, Hisilicon, Mediatek, Qualcomm, and Renesas and there are a couple of other updates for Rockchip, Xilinx and NXP/Freescale" * tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (102 commits) ARM64: dts: amlogic: Add Tronsmart Vega S95 configs Documentation: devicetree: amlogic: Document Tronsmart Vega S95 boards ARM64: dts: Prepare configs for Amlogic Meson GXBaby Documentation: devicetree: amlogic: Document Meson GXBaby devicetree: bindings: Add vendor prefix for Tronsmart arm64: dts: qcom: Fix MPP's function used for LED control arm64: dts: alpine: add the MSIX node in the Alpine v2 dtsi arm64: dts: add the Alpine v2 EVP arm64: dts: marvell: re-order Device Tree nodes for Armada AP806 arm64: dts: marvell: update Armada AP806 clock description arm64: dts: marvell: add Device Tree files for Armada 7K/8K arm64: dts: apm: Add DT node for X-Gene v2 SLIMpro Mailbox I2C Driver arm64: dts: apm: Mailbox device tree node for APM X-Gene v2 platform. arm64: dts: apm: Add DT node for X-Gene v1 SLIMpro Mailbox I2C Driver arm64: dts: apm: mailbox device tree node for APM X-Gene platform. arm64: dts: apm: Update GPIO to control power-off on X-Gene v2 platforms arm64: dts: apm: Update GPIO standby controller DT node for X-Gene v2 platforms arm64: dts: apm: Update GPIO to control power-off on X-Gene v1 platforms arm64: dts: salvator-x: enable USB 2.0 Host of channel 1 and 2 arm64: dts: salvator-x: enable usb2_phy of channel 1 and 2 ... 
Pull ARM 64-bit DT updates from Arnd Bergmann:
 "The arm64 device tree changes make up an increasing portion of the
  overall changes, so they are kept separate from the 32-bit devicetree
  changes and from the other arm64 updates.

  Newly added SoCs and boards are:
   - 96Boards Husky board
   - AMD Overdrive board
   - Amlogic S905 SoC and related Tronsmart boxes
   - Annapurna Labs Alpine family and development board
   - Broadcom Vulcan servers
   - Broadcom Northstar 2 SoC
   - Marvell Armada 3700 family and development board
   - Qualcomm MSM8996 SoC

  Additional devices are enabled for existing platforms from Applied
  Micro, Hisilicon, Mediatek, Qualcomm, and Renesas and there are a
  couple of other updates for Rockchip, Xilinx and NXP/Freescale"

* tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (102 commits)
  ARM64: dts: amlogic: Add Tronsmart Vega S95 configs
  Documentation: devicetree: amlogic: Document Tronsmart Vega S95 boards
  ARM64: dts: Prepare configs for Amlogic Meson GXBaby
  Documentation: devicetree: amlogic: Document Meson GXBaby
  devicetree: bindings: Add vendor prefix for Tronsmart
  arm64: dts: qcom: Fix MPP's function used for LED control
  arm64: dts: alpine: add the MSIX node in the Alpine v2 dtsi
  arm64: dts: add the Alpine v2 EVP
  arm64: dts: marvell: re-order Device Tree nodes for Armada AP806
  arm64: dts: marvell: update Armada AP806 clock description
  arm64: dts: marvell: add Device Tree files for Armada 7K/8K
  arm64: dts: apm: Add DT node for X-Gene v2 SLIMpro Mailbox I2C Driver
  arm64: dts: apm: Mailbox device tree node for APM X-Gene v2 platform.
  arm64: dts: apm: Add DT node for X-Gene v1 SLIMpro Mailbox I2C Driver
  arm64: dts: apm: mailbox device tree node for APM X-Gene platform.
  arm64: dts: apm: Update GPIO to control power-off on X-Gene v2 platforms
  arm64: dts: apm: Update GPIO standby controller DT node for X-Gene v2 platforms
  arm64: dts: apm: Update GPIO to control power-off on X-Gene v1 platforms
  arm64: dts: salvator-x: enable USB 2.0 Host of channel 1 and 2
  arm64: dts: salvator-x: enable usb2_phy of channel 1 and 2
  ...
Documentation: add sbsa-gwdt driver documentation 2016-03-04T19:23:14+00:00 Fu Wei fu.wei@linaro.org 2016-02-29T08:46:47+00:00 2fc94b5f229a5d9d1db7fd91d0a4808cfeb915f5 The sbsa-gwdt.txt documentation in devicetree/bindings/watchdog is for introducing SBSA(Server Base System Architecture) Generic Watchdog device node info into FDT. Also add sbsa-gwdt introduction in watchdog-parameters.txt Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Fu Wei <fu.wei@linaro.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> 
The sbsa-gwdt.txt documentation in devicetree/bindings/watchdog is for
introducing SBSA(Server Base System Architecture) Generic Watchdog
device node info into FDT.

Also add sbsa-gwdt introduction in watchdog-parameters.txt

Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Fu Wei <fu.wei@linaro.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
dt-bindings: watchdog: Add ARM SP805 DT bindings 2016-02-12T23:48:54+00:00 Anup Patel anup.patel@broadcom.com 2016-02-10T06:10:49+00:00 f2e876969c19ba441c9595ae51969ab1347ca7a6 The ARM SP805 DT node is already present in various DTS files. This patch adds missing DT bindings documentation for ARM SP805. Signed-off-by: Anup Patel <anup.patel@broadcom.com> Reviewed-by: Ray Jui <rjui@broadcom.com> Reviewed-by: Vikram Prakash <vikramp@broadcom.com> Reviewed-by: Scott Branden <sbranden@broadcom.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> 
The ARM SP805 DT node is already present in various DTS files.
This patch adds missing DT bindings documentation for ARM SP805.

Signed-off-by: Anup Patel <anup.patel@broadcom.com>
Reviewed-by: Ray Jui <rjui@broadcom.com>
Reviewed-by: Vikram Prakash <vikramp@broadcom.com>
Reviewed-by: Scott Branden <sbranden@broadcom.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Merge tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc 2016-01-21T02:21:32+00:00 Linus Torvalds torvalds@linux-foundation.org 2016-01-21T02:21:32+00:00 62c79bb3a99fb46a8624f9c7e86fa5ee2f936360 Pull ARM 64-bit DT updates from Olof Johansson: "This is the first release where we split up the 64-bit contributions a bit more, and in particular we are having a separate DT branch for them. Contents: - New devices added to Broadcom NorthStar2 - Misc fixes for Exynos7 boards - QCOM updates for MSM8916 - Rockchip tweaks for rk3368 SoC and eval board - A series of fixes for APM X-Gene v1 and v2 - Renesas R8A7795 CPU/PSCI additions - Marvell Berlin4CT PSCI, cpuidle, watchdog portions - Freescale LS1043a SoC and dev board support + some treewide or other misc changes" * tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (104 commits) dts/ls2080a: Update DTSI to add support of SP805 WDT Documentation: DT: Add entry for ARM SP805-WDT arm64: dts: X-Gene v2: I2C1 clock is always on arm64: dts: X-Gene v1: I2C0 clock is always on arm64: dts: Fix to use standard DT node names for X-Gene 1 and X-Gene 2 platforms arm64: dts: hikey: add label properties to UARTs arm64: dts: apq8016-sbc: add label properties for UART, I2C, and SPI arm64: dts: apq8016-sbc: enable UART0 on LS connector arm64: dts: juno: Add idle-states to device tree arm64: dts: Added syscon-reboot node for FSL's LS2080A SoC arm64: dts: add LS1043a-RDB board support arm64: dts: add Freescale LS1043a SoC support Documentation: DT: Add entry for Freescale LS1043a-RDB board arm64: dts: uniphier: add PH1-LD10 SoC/board support arm64: renesas: r8a7795: fix SATA clock assignment arm64: dts: salvator-x: Enable SATA controller arm64: dts: r8a7795: Add SATA controller node arm64: renesas: r8a7795: add internal delay for i2c IPs arm64: renesas: salvator-x: Add board part number to DT bindings arm64: dts: r8a7795: Add pmu device nodes ... 
Pull ARM 64-bit DT updates from Olof Johansson:
 "This is the first release where we split up the 64-bit contributions a
  bit more, and in particular we are having a separate DT branch for
  them.

  Contents:

   - New devices added to Broadcom NorthStar2
   - Misc fixes for Exynos7 boards
   - QCOM updates for MSM8916
   - Rockchip tweaks for rk3368 SoC and eval board
   - A series of fixes for APM X-Gene v1 and v2
   - Renesas R8A7795 CPU/PSCI additions
   - Marvell Berlin4CT PSCI, cpuidle, watchdog portions
   - Freescale LS1043a SoC and dev board support

  + some treewide or other misc changes"

* tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (104 commits)
  dts/ls2080a: Update DTSI to add support of SP805 WDT
  Documentation: DT: Add entry for ARM SP805-WDT
  arm64: dts: X-Gene v2: I2C1 clock is always on
  arm64: dts: X-Gene v1: I2C0 clock is always on
  arm64: dts: Fix to use standard DT node names for X-Gene 1 and X-Gene 2 platforms
  arm64: dts: hikey: add label properties to UARTs
  arm64: dts: apq8016-sbc: add label properties for UART, I2C, and SPI
  arm64: dts: apq8016-sbc: enable UART0 on LS connector
  arm64: dts: juno: Add idle-states to device tree
  arm64: dts: Added syscon-reboot node for FSL's LS2080A SoC
  arm64: dts: add LS1043a-RDB board support
  arm64: dts: add Freescale LS1043a SoC support
  Documentation: DT: Add entry for Freescale LS1043a-RDB board
  arm64: dts: uniphier: add PH1-LD10 SoC/board support
  arm64: renesas: r8a7795: fix SATA clock assignment
  arm64: dts: salvator-x: Enable SATA controller
  arm64: dts: r8a7795: Add SATA controller node
  arm64: renesas: r8a7795: add internal delay for i2c IPs
  arm64: renesas: salvator-x: Add board part number to DT bindings
  arm64: dts: r8a7795: Add pmu device nodes
  ...
Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc 2016-01-21T02:16:29+00:00 Linus Torvalds torvalds@linux-foundation.org 2016-01-21T02:16:29+00:00 6d1c244803f2c013fb9c31b0904c01f1830b73ab Pull ARM DT updates from Olof Johansson: "As usual, the bulk of this release is again DT file contents. There's a huge number of changes here, and it's challenging to give a crisp overview of just what is in here. To start with: New boards: - TI-based DM3730 from LogicPD (Torpedo) - Cosmic+ M4 (nommu) initial support (Freescale Vybrid) - Raspberry Pi 2 DT files - Watchdog on Meson8b - Veyron-mickey (ASUS Chromebit) DTS - Rockchip rk3228 SoC and eval board - Sigma Designs Tango4 Improvements: - Improved support for Qualcomm APQ8084, including Sony Xperia Z DT files - Misc new devices for Rockchip rk3036 and rk3288 - Allwinner updates for misc SoCs and systems ... and a _large_ number of other changes across the field. Devices added to SoC DTSI and board DTS files for a number of SoC vendors, new product boards on already-supported SoCs, cleanups and refactorings of existing DTS/DTSI files and a bunch of other changes" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (469 commits) ARM: dts: compulab: add new board description ARM: versatile: add the syscon LEDs to the DT dts: vt8500: Fix errors in SDHC node for WM8505 ARM: dts: imx6q: clean up unused ipu2grp ARM: dts: silk: Add compatible property to "partitions" node ARM: dts: gose: Add compatible property to "partitions" node ARM: dts: porter: Add compatible property to "partitions" node ARM: dts: koelsch: Add compatible property to "partitions" node ARM: dts: lager: Add compatible property to "partitions" node ARM: dts: bockw: Add compatible property to "partitions" node ARM: dts: meson8b: Add watchdog node Documentation: watchdog: Add new bindings for meson8b ARM: meson: Add status LED for Odroid-C1 ARM: dts: uniphier: fix a typo in comment block ARM: bcm2835: Add the auxiliary clocks to the device tree. ARM: bcm2835: Add devicetree for bcm2836 and Raspberry Pi 2 B ARM: bcm2835: Move the CPU/peripheral include out of common RPi DT. ARM: bcm2835: Split the DT for peripherals from the DT for the CPU ARM: realview: set up cache correctly on the PB11MPCore ARM: dts: Unify G2D device node with other devices on exynos4 ... 
Pull ARM DT updates from Olof Johansson:
 "As usual, the bulk of this release is again DT file contents.

  There's a huge number of changes here, and it's challenging to give a
  crisp overview of just what is in here.  To start with:

  New boards:

   - TI-based DM3730 from LogicPD (Torpedo)
   - Cosmic+ M4 (nommu) initial support (Freescale Vybrid)
   - Raspberry Pi 2 DT files
   - Watchdog on Meson8b
   - Veyron-mickey (ASUS Chromebit) DTS
   - Rockchip rk3228 SoC and eval board
   - Sigma Designs Tango4

  Improvements:

   - Improved support for Qualcomm APQ8084, including Sony Xperia Z DT files
   - Misc new devices for Rockchip rk3036 and rk3288
   - Allwinner updates for misc SoCs and systems

  ... and a _large_ number of other changes across the field.  Devices
  added to SoC DTSI and board DTS files for a number of SoC vendors, new
  product boards on already-supported SoCs, cleanups and refactorings of
  existing DTS/DTSI files and a bunch of other changes"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (469 commits)
  ARM: dts: compulab: add new board description
  ARM: versatile: add the syscon LEDs to the DT
  dts: vt8500: Fix errors in SDHC node for WM8505
  ARM: dts: imx6q: clean up unused ipu2grp
  ARM: dts: silk: Add compatible property to "partitions" node
  ARM: dts: gose: Add compatible property to "partitions" node
  ARM: dts: porter: Add compatible property to "partitions" node
  ARM: dts: koelsch: Add compatible property to "partitions" node
  ARM: dts: lager: Add compatible property to "partitions" node
  ARM: dts: bockw: Add compatible property to "partitions" node
  ARM: dts: meson8b: Add watchdog node
  Documentation: watchdog: Add new bindings for meson8b
  ARM: meson: Add status LED for Odroid-C1
  ARM: dts: uniphier: fix a typo in comment block
  ARM: bcm2835: Add the auxiliary clocks to the device tree.
  ARM: bcm2835: Add devicetree for bcm2836 and Raspberry Pi 2 B
  ARM: bcm2835: Move the CPU/peripheral include out of common RPi DT.
  ARM: bcm2835: Split the DT for peripherals from the DT for the CPU
  ARM: realview: set up cache correctly on the PB11MPCore
  ARM: dts: Unify G2D device node with other devices on exynos4
  ...
watchdog: add MT7621 watchdog support 2016-01-09T16:45:28+00:00 John Crispin blogic@openwrt.org 2016-01-04T19:36:38+00:00 ab3f09fe16d158cb4f84e558c61ec5d6d601f2e0 This patch adds support for the watchdog core found on newer MediaTek Wifi SoCs MT7621 and MT7628. There is no symbol for MT7628 as it is a subtype of MT7620 so we depend on that instead. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> 
This patch adds support for the watchdog core found on newer MediaTek Wifi
SoCs MT7621 and MT7628. There is no symbol for MT7628 as it is a subtype of
MT7620 so we depend on that instead.

Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Merge tag 'meson-for-4.5/dts' of https://github.com/carlocaione/linux-meson into next/dt 2016-01-08T10:43:57+00:00 Arnd Bergmann arnd@arndb.de 2016-01-08T10:43:57+00:00 3c81e4e60a627afb7ac7b8dc855a88b02d9f0cca Merge "Amlogic DT changes for 4.5" from Carlo Caione: This pull request includes the Amlogic Meson8b DTS changes for v4.5 * tag 'meson-for-4.5/dts' of https://github.com/carlocaione/linux-meson: ARM: dts: meson8b: Add watchdog node Documentation: watchdog: Add new bindings for meson8b ARM: meson: Add status LED for Odroid-C1 
Merge "Amlogic DT changes for 4.5" from Carlo Caione:

This pull request includes the Amlogic Meson8b DTS changes for v4.5

* tag 'meson-for-4.5/dts' of https://github.com/carlocaione/linux-meson:
  ARM: dts: meson8b: Add watchdog node
  Documentation: watchdog: Add new bindings for meson8b
  ARM: meson: Add status LED for Odroid-C1
Documentation: watchdog: Add new bindings for meson8b 2016-01-04T09:54:44+00:00 Carlo Caione carlo@endlessm.com 2015-11-08T12:18:56+00:00 ea22446a9d170bf7f32bd7f99036e17df918f054 We make the documentation not meson6 specific anymore and add the new binding for meson8b SoC. Signed-off-by: Carlo Caione <carlo@endlessm.com> 
We make the documentation not meson6 specific anymore and add the new
binding for meson8b SoC.

Signed-off-by: Carlo Caione <carlo@endlessm.com>
Documentation: DT: Add entry for ARM SP805-WDT 2015-12-31T15:40:00+00:00 Bhupesh Sharma bhupesh.sharma@freescale.com 2015-12-28T10:01:23+00:00 766faef1f4c0b37b2cb2c0de214dacf54e29ac05 This patch adds a devicetree binding documentation for ARM's SP805 WatchDog Timer. Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> 
This patch adds a devicetree binding documentation for ARM's
SP805 WatchDog Timer.

Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
devicetree: watchdog: add binding for Sigma Designs SMP8642 watchdog 2015-12-28T22:03:55+00:00 Mans Rullgard mans@mansr.com 2015-11-18T17:55:42+00:00 2bfc9beb61ed042c4c7632bd1c96c9dfbcedcc05 This adds a binding for the watchdog in Sigma Designs SMP8642 and similar devices. Signed-off-by: Mans Rullgard <mans@mansr.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> 
This adds a binding for the watchdog in Sigma Designs SMP8642 and
similar devices.

Signed-off-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>