Pull libata fixes from Tejun Heo:
 "The most notable is the revert of lock splitting optimization in ahci.
  This also made the IRQ handling threaded even when there's only one
  IRQ in use.  The conversion missed IRFQ_SHARED leading to screaming
  IRQs problem in some cases and the threaded IRQ handling showed
  performance regression in some LKP test cases.  The changes are
  reverted for now.  It'll probably be retried once threaded IRQ
  handling is removed from ahci.

  Other than that, there's one fix for ahci and several patches adding
  device IDs"

* 'for-3.18-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  ahci: fix AHCI parameters not taken into account
  ata: sata_rcar: Add r8a7793 device support
  ahci: Add Device IDs for Intel Sunrise Point PCH
  ahci: disable MSI instead of NCQ on Samsung pci-e SSDs on macbooks
  Revert "AHCI: Optimize single IRQ interrupt processing"
  Revert "AHCI: Do not acquire ata_host::lock from single IRQ handler"
  ata: sata_rcar: Disable DIPM mode for r8a7790 ES1

Pull thermal fixes from Eduardo Valentin:
 "Specifics:
   - a few code fixes improving the Exynos code base.  They remove dead
     and unreachable code.  No functional changes here
   - in Exynos code base, fixes regarding the right usage of features
     (TRIMINFO and TRIMRELOAD)
   - documentation of RCAR thermal
   - fix in the of-thermal, regarding the proper usage of of-APIs
   - fixes on thermal-core, removal of unreachable code"

[ Eduardo is sending the thermal fixes on behalf of Rui Zhang this time.
  Rui is currently unable to send pull requests due to troubles with his
  machine and he's currently in a business trip ]

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal:
  Thermal:Remove usless if(!result) before return tz
  thermal: exynos: fix IRQ clearing on TMU initialization
  thermal: fix multiple disbalanced device node counters
  thermal: rcar: Add binding docs for new R-Car Gen2 SoCs
  thermal: exynos: Add support for TRIM_RELOAD feature at Exynos3250
  thermal: exynos: Add support for many TRIMINFO_CTRL registers
  thermal: samsung: Exynos5260 and Exynos5420 should not use TRIM_RELOAD flag
  thermal: exynos: remove identical values from exynos*_tmu_registers structures
  thermal: exynos: remove redundant pdata checks from exynos_tmu_control()
  thermal: exynos: cache non_hw_trigger_levels in pdata
  thermal: exynos: simplify temp_to_code() and code_to_temp()
  thermal: exynos: remove redundant threshold_code checks from exynos_tmu_initialize()
  thermal: exynos: remove redundant pdata checks from exynos_tmu_initialize()
  thermal: exynos: remove dead code for HW_MODE calibration
  thermal: exynos: remove unused struct exynos_tmu_registers entries

  - r8a7792 (R-Car V2H)
  - r8a7793 (R-Car M2-N)
  - r8a7794 (R-Car E2)

r8a7791 is now called "R-Car M2-W".

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

Pull networking fixes from David Miller:
 "A bit has accumulated, but it's been a week or so since my last batch
  of post-merge-window fixes, so...

   1) Missing module license in netfilter reject module, from Pablo.
      Lots of people ran into this.

   2) Off by one in mac80211 baserate calculation, from Karl Beldan.

   3) Fix incorrect return value from ax88179_178a driver's set_mac_addr
      op, which broke use of it with bonding.  From Ian Morgan.

   4) Checking of skb_gso_segment()'s return value was not all
      encompassing, it can return an SKB pointer, a pointer error, or
      NULL.  Fix from Florian Westphal.

      This is crummy, and longer term will be fixed to just return error
      pointers or a real SKB.

   6) Encapsulation offloads not being handled by
      skb_gso_transport_seglen().  From Florian Westphal.

   7) Fix deadlock in TIPC stack, from Ying Xue.

   8) Fix performance regression from using rhashtable for netlink
      sockets.  The problem was the synchronize_net() invoked for every
      socket destroy.  From Thomas Graf.

   9) Fix bug in eBPF verifier, and remove the strong dependency of BPF
      on NET.  From Alexei Starovoitov.

  10) In qdisc_create(), use the correct interface to allocate
      ->cpu_bstats, otherwise the u64_stats_sync member isn't
      initialized properly.  From Sabrina Dubroca.

  11) Off by one in ip_set_nfnl_get_byindex(), from Dan Carpenter.

  12) nf_tables_newchain() was erroneously expecting error pointers from
      netdev_alloc_pcpu_stats().  It only returna a valid pointer or
      NULL.  From Sabrina Dubroca.

  13) Fix use-after-free in _decode_session6(), from Li RongQing.

  14) When we set the TX flow hash on a socket, we mistakenly do so
      before we've nailed down the final source port.  Move the setting
      deeper to fix this.  From Sathya Perla.

  15) NAPI budget accounting in amd-xgbe driver was counting descriptors
      instead of full packets, fix from Thomas Lendacky.

  16) Fix total_data_buflen calculation in hyperv driver, from Haiyang
      Zhang.

  17) Fix bcma driver build with OF_ADDRESS disabled, from Hauke
      Mehrtens.

  18) Fix mis-use of per-cpu memory in TCP md5 code.  The problem is
      that something that ends up being vmalloc memory can't be passed
      to the crypto hash routines via scatter-gather lists.  From Eric
      Dumazet.

  19) Fix regression in promiscuous mode enabling in cdc-ether, from
      Olivier Blin.

  20) Bucket eviction and frag entry killing can race with eachother,
      causing an unlink of the object from the wrong list.  Fix from
      Nikolay Aleksandrov.

  21) Missing initialization of spinlock in cxgb4 driver, from Anish
      Bhatt.

  22) Do not cache ipv4 routing failures, otherwise if the sysctl for
      forwarding is subsequently enabled this won't be seen.  From
      Nicolas Cavallari"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (131 commits)
  drivers: net: cpsw: Support ALLMULTI and fix IFF_PROMISC in switch mode
  drivers: net: cpsw: Fix broken loop condition in switch mode
  net: ethtool: Return -EOPNOTSUPP if user space tries to read EEPROM with lengh 0
  stmmac: pci: set default of the filter bins
  net: smc91x: Fix gpios for device tree based booting
  mpls: Allow mpls_gso to be built as module
  mpls: Fix mpls_gso handler.
  r8152: stop submitting intr for -EPROTO
  netfilter: nft_reject_bridge: restrict reject to prerouting and input
  netfilter: nft_reject_bridge: don't use IP stack to reject traffic
  netfilter: nf_reject_ipv6: split nf_send_reset6() in smaller functions
  netfilter: nf_reject_ipv4: split nf_send_reset() in smaller functions
  netfilter: nf_tables_bridge: update hook_mask to allow {pre,post}routing
  drivers/net: macvtap and tun depend on INET
  drivers/net, ipv6: Select IPv6 fragment idents for virtio UFO packets
  drivers/net: Disable UFO through virtio
  net: skb_fclone_busy() needs to detect orphaned skb
  gre: Use inner mac length when computing tunnel length
  mlx4: Avoid leaking steering rules on flow creation error flow
  net/mlx4_en: Don't attempt to TX offload the outer UDP checksum for VXLAN
  ...

With legacy booting, the platform init code was taking care of
the configuring of GPIOs. With device tree based booting, things
may or may not work depending what bootloader has configured or
if the legacy platform code gets called.

Let's add support for the pwrdn and reset GPIOs to the smc91x
driver to fix the issues of smc91x not working properly when
booted in device tree mode.

And let's change n900 to use these settings as some versions
of the bootloader do not configure things properly causing
errors.

Reported-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull documentation fixes from Jonathan Corbet:
 "So this is my first pull request since I rashly agreed to look after
  the documentation subtree.  It contains some typo fixes, a few minor
  documentation improvements, and, most importantly, fixes for a couple
  of build problems in various bits of sample code.

  I fully intend to start sending pull requests with signed tags.
  However, due to poor planning on my part and the general obnoxiousness
  of life, I'm 2000 miles away from my private key which is sitting on a
  powered-down machine.  This should be fixed before my next request.

  Meanwhile git.lwn.net is a machine under my control, the patches are
  all trivial, and all have done time in linux-next"

* tag 'docs-for-linus' of git://git.lwn.net/linux-2.6:
  Documentation/SubmittingPatches: Reported-by tags and permission
  Documentation: remove outdated references to the linux-next wiki
  Documentation: Restrict TSC test code to x86
  doc: kernel-parameters.txt: Add ide-generic.probe-mask
  vdso: don't require 64-bit math in standalone test
  Documentation: Add CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF case
  Documentation: Add default kmemleak off case in kernel-parameters.txt
  Docs: Document that the sticky bit is understood by hugetlbfs
  DocBook: Reduce noise from make cleandocs
  Documentation: fix vdso_standalone_test_x86 on 32-bit
  Documentation: dt-bindings: Explain order in patch series
  Documentation/ABI/testing/sysfs-ibft: fix a typo

Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

Unlike other SATA R-Car r8a7790 controllers the r8a7790 ES1 SATA R-Car
controller needs to be run with DIPM disabled.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org

Pull thermal management updates from Zhang Rui:
 "Sorry that I missed the merge window as there is a bug found in the
  last minute, and I have to fix it and wait for the code to be tested
  in linux-next tree for a few days.  Now the buggy patch has been
  dropped entirely from my next branch.  Thus I hope those changes can
  still be merged in 3.18-rc2 as most of them are platform thermal
  driver changes.

  Specifics:

   - introduce ACPI INT340X thermal drivers.

     Newer laptops and tablets may have thermal sensors and other
     devices with thermal control capabilities that are exposed for the
     OS to use via the ACPI INT340x device objects.  Several drivers are
     introduced to expose the temperature information and cooling
     ability from these objects to user-space via the normal thermal
     framework.

     From: Lu Aaron, Lan Tianyu, Jacob Pan and Zhang Rui.

   - introduce a new thermal governor, which just uses a hysteresis to
     switch abruptly on/off a cooling device.  This governor can be used
     to control certain fan devices that can not be throttled but just
     switched on or off.  From: Peter Feuerer.

   - introduce support for some new thermal interrupt functions on
     i.MX6SX, in IMX thermal driver.  From: Anson, Huang.

   - introduce tracing support on thermal framework.  From: Punit
     Agrawal.

   - small fixes in OF thermal and thermal step_wise governor"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (25 commits)
  Thermal: int340x thermal: select ACPI fan driver
  Thermal: int3400_thermal: use acpi_thermal_rel parsing APIs
  Thermal: int340x_thermal: expose acpi thermal relationship tables
  Thermal: introduce int3403 thermal driver
  Thermal: introduce INT3402 thermal driver
  Thermal: move the KELVIN_TO_MILLICELSIUS macro to thermal.h
  ACPI / Fan: support INT3404 thermal device
  ACPI / Fan: add ACPI 4.0 style fan support
  ACPI / fan: convert to platform driver
  ACPI / fan: use acpi_device_xxx_power instead of acpi_bus equivelant
  ACPI / fan: remove no need check for device pointer
  ACPI / fan: remove unused macro
  Thermal: int3400 thermal: register to thermal framework
  Thermal: int3400 thermal: add capability to detect supporting UUIDs
  Thermal: introduce int3400 thermal driver
  ACPI: add ACPI_TYPE_LOCAL_REFERENCE support to acpi_extract_package()
  ACPI: make acpi_create_platform_device() an external API
  thermal: step_wise: fix: Prevent from binary overflow when trend is dropping
  ACPI: introduce ACPI int340x thermal scan handler
  thermal: Added Bang-bang thermal governor
  ...