Pull PCI changes from Bjorn Helgaas:
 "Marvell MVEBU
    - Remove ARCH_KIRKWOOD dependency (Andrew Lunn)

  NVIDIA Tegra
    - Add debugfs support (Thierry Reding)

  Synopsys DesignWare
    - Look for configuration space in 'reg', not 'ranges' (Kishon Vijay Abraham I)
    - Program ATU with untranslated address (Kishon Vijay Abraham I)
    - Add config access-related pcie_host_ops for v3.65 hardware (Murali Karicheri)
    - Add MSI-related pcie_host_ops for v3.65 hardware (Murali Karicheri)

  TI DRA7xx
    - Add TI DR7xx PCIe driver (Kishon Vijay Abraham I)"

* tag 'pci-v3.17-changes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI: designware: Add MSI-related pcie_host_ops for v3.65 hardware
  PCI: designware: Add config access-related pcie_host_ops for v3.65 hardware
  PCI: dra7xx: Add TI DRA7xx PCIe driver
  PCI: designware: Program ATU with untranslated address
  PCI: designware: Look for configuration space in 'reg', not 'ranges'
  PCI: tegra: Add debugfs support
  PCI: mvebu: Remove ARCH_KIRKWOOD dependency

In case the Device Tree blob passed by the boot agent supplies both an
'interrupts-extended' and an 'interrupts' property in order to allow for
older kernels to be usable, prefer the new-style 'interrupts-extended'
property which conveys a lot more information.

This allows us to have bootloaders willingly maintaining backwards
compatibility with older kernels without entirely deprecating the
'interrupts' property.

Update the bindings documentation to describe a situation where both the
'interrupts-extended' and the 'interrupts' property are present, and
which one takes precedence over the other.

Cc: stable@vger.kernel.org # 3.13+
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Grant Likely <grant.likely@linaro.org>

Pull device tree updates from Grant Likely:
 "The branch contains the following device tree changes the v3.17 merge
  window:

  Group changes to the device tree.  In preparation for adding device
  tree overlay support, OF_DYNAMIC is reworked so that a set of device
  tree changes can be prepared and applied to the tree all at once.
  OF_RECONFIG notifiers see the most significant change here so that
  users always get a consistent view of the tree.  Notifiers generation
  is moved from before a change to after it, and notifiers for a group
  of changes are emitted after the entire block of changes have been
  applied

  Automatic console selection from DT.  Console drivers can now use
  of_console_check() to see if the device node is specified as a console
  device.  If so then it gets added as a preferred console.  UART
  devices get this support automatically when uart_add_one_port() is
  called.

  DT unit tests no longer depend on pre-loaded data in the device tree.
  Data is loaded dynamically at the start of unit tests, and then
  unloaded again when the tests have completed.

  Also contains a few bugfixes for reserved regions and early memory
  setup"

* tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux: (21 commits)
  of: Fixing OF Selftest build error
  drivers: of: add automated assignment of reserved regions to client devices
  of: Use proper types for checking memory overflow
  of: typo fix in __of_prop_dup()
  Adding selftest testdata dynamically into live tree
  of: Add todo tasklist for Devicetree
  of: Transactional DT support.
  of: Reorder device tree changes and notifiers
  of: Move dynamic node fixups out of powerpc and into common code
  of: Make sure attached nodes don't carry along extra children
  of: Make devicetree sysfs update functions consistent.
  of: Create unlocked versions of node and property add/remove functions
  OF: Utility helper functions for dynamic nodes
  of: Move CONFIG_OF_DYNAMIC code into a separate file
  of: rename of_aliases_mutex to just of_mutex
  of/platform: Fix of_platform_device_destroy iteration of devices
  of: Migrate of_find_node_by_name() users to for_each_node_by_name()
  tty: Update hypervisor tty drivers to use core stdout parsing code.
  arm/versatile: Add the uart as the stdout device.
  of: Enable console on serial ports specified by /chosen/stdout-path
  ...

Pull MMC updates from Ulf Hansson:
 "Me and Chris Ball decided to try out using my MMC tree as the primary
  one, to simplify handling of patches.

  This pull does thus contains all the MMC patches for 3.17 rc1, no pull
  from Chris this time.

  Details:

  MMC core:
   - forward compatibility for eMMC
   - fix some blacklisted cards with broken secure discard

  MMC host:
   - mmci: Add support for Qualcomm variant
   - mmci: Fix regression for arm_variant
   - sdhci: Various fixes and cleanups
   - sdhci: Improve external VDD regulator support
   - sdhci: Support for DDR50 1.8V mode for BayTrail
   - sdhci-st: Add driver for ST SDHCI controller
   - sh-mmcif: DMA fixes
   - omap_hsmmc: Add support for SDIO interrupts
   - sdhci-pci: Add support for Intel Quark X1000
   - dw_mmc: Update the reset sequence
   - s3cmci: port DMA code to dmaengine API"

* tag 'mmc-v3.17-1' of git://git.linaro.org/people/ulf.hansson/mmc: (67 commits)
  mmc: dw_mmc: modify the dt-binding for removing slot-node and supports-highspeed
  mmc: dw_mmc: Slot quirk "disable-wp" is deprecated.
  mmc: mmci: Reverse IRQ handling for the arm_variant
  mmc: mmci: Move all CMD irq handling to mmci_cmd_irq()
  mmc: mmci: Remove redundant check of status for DATA irq
  mmc: dw_mmc: change to use recommended reset procedure
  mmc: sdhci-pxav3: Use devm_* managed helpers
  mmc: tmio: Configure DMA slave bus width
  mmc: sh_mmcif: Configure DMA slave bus width
  mmc: sh_mmcif: Fix DMA slave address configuration
  mmc: sh_mmcif: Document DT bindings
  mmc: sdhci-pci: remove PCI PM functions in suspend/resume callback
  mmc: Do not advertise secure discard if it is blacklisted
  mmc: sdhci-msm: Get COMPILE_TEST support
  mmc: sdhci-msm: Remove unnecessary header file inclusion
  mmc: sdhci-msm: Fix the binding example
  mmc: sdhci: add DDR50 1.8V mode support for BayTrail eMMC Controller
  mmc: sdhci: Preset value not supported in Baytrail eMMC
  mmc: MMC_USDHI6ROL0 should depend on HAS_DMA
  mmc: MMC_SH_MMCIF should depend on HAS_DMA
  ...

Pull networking fixes from David Miller:
 "Several networking final fixes and tidies for the merge window:

   1) Changes during the merge window unintentionally took away the
      ability to build bluetooth modular, fix from Geert Uytterhoeven.

   2) Several phy_node reference count bug fixes from Uwe Kleine-König.

   3) Fix ucc_geth build failures, also from Uwe Kleine-König.

   4) Fix klog false positivies when netlink messages go to network
      taps, by properly resetting the network header.  Fix from Daniel
      Borkmann.

   5) Sizing estimate of VF netlink messages is too small, from Jiri
      Benc.

   6) New APM X-Gene SoC ethernet driver, from Iyappan Subramanian.

   7) VLAN untagging is erroneously dependent upon whether the VLAN
      module is loaded or not, but there are generic dependencies that
      matter wrt what can be expected as the SKB enters the stack.
      Make the basic untagging generic code, and do it unconditionally.
      From Vlad Yasevich.

   8) xen-netfront only has so many slots in it's transmit queue so
      linearize packets that have too many frags.  From Zoltan Kiss.

   9) Fix suspend/resume PHY handling in bcmgenet driver, from Florian
      Fainelli"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (55 commits)
  net: bcmgenet: correctly resume adapter from Wake-on-LAN
  net: bcmgenet: update UMAC_CMD only when link is detected
  net: bcmgenet: correctly suspend and resume PHY device
  net: bcmgenet: request and enable main clock earlier
  net: ethernet: myricom: myri10ge: myri10ge.c: Cleaning up missing null-terminate after strncpy call
  xen-netfront: Fix handling packets on compound pages with skb_linearize
  net: fec: Support phys probed from devicetree and fixed-link
  smsc: replace WARN_ON() with WARN_ON_SMP()
  xen-netback: Don't deschedule NAPI when carrier off
  net: ethernet: qlogic: qlcnic: Remove duplicate object file from Makefile
  wan: wanxl: Remove typedefs from struct names
  m68k/atari: EtherNEC - ethernet support (ne)
  net: ethernet: ti: cpmac.c: Cleaning up missing null-terminate after strncpy call
  hdlc: Remove typedefs from struct names
  airo_cs: Remove typedef local_info_t
  atmel: Remove typedef atmel_priv_ioctl
  com20020_cs: Remove typedef com20020_dev_t
  ethernet: amd: Remove typedef local_info_t
  net: Always untag vlan-tagged traffic on input.
  drivers: net: Add APM X-Gene SoC ethernet driver support.
  ...

This adds support for specifying the phy to be used with the fec in the
devicetree using the standard phy-handle property and also supports
fixed-link.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds documentation for APM X-Gene SoC ethernet DTS binding.

Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: Ravi Patel <rapatel@apm.com>
Signed-off-by: Keyur Chudgar <kchudgar@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull slave-dma updates from Vinod Koul:
 "Some notable changes are:
   - new driver for AMBA AXI NBPF by Guennadi
   - new driver for sun6i controller by Maxime
   - pl330 drivers fixes from Lar's
   - sh-dma updates and fixes from Laurent, Geert and Kuninori
   - Documentation updates from Geert
   - drivers fixes and updates spread over dw, edma, freescale, mpc512x
     etc.."

* 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (72 commits)
  dmaengine: sun6i: depends on RESET_CONTROLLER
  dma: at_hdmac: fix invalid remaining bytes detection
  dmaengine: nbpfaxi: don't build this driver where it cannot be used
  dmaengine: nbpf_error_get_channel() can be static
  dma: pl08x: Use correct specifier for size_t values
  dmaengine: Remove the context argument to the prep_dma_cyclic operation
  dmaengine: nbpfaxi: convert to tasklet
  dmaengine: nbpfaxi: fix a theoretical race
  dmaengine: add a driver for AMBA AXI NBPF DMAC IP cores
  dmaengine: add device tree binding documentation for the nbpfaxi driver
  dmaengine: edma: Do not register second device when booted with DT
  dmaengine: edma: Do not change the error code returned from edma_alloc_slot
  dmaengine: rcar-dmac: Add device tree bindings documentation
  dmaengine: shdma: Allocate cyclic sg list dynamically
  dmaengine: shdma: Make channel filter ignore unrelated devices
  dmaengine: sh: Rework Kconfig and Makefile
  dmaengine: sun6i: Fix memory leaks
  dmaengine: sun6i: Free the interrupt before killing the tasklet
  dmaengine: sun6i: Remove switch statement from buswidth convertion routine
  dmaengine: of: kconfig: select DMA_ENGINE when DMA_OF is selected
  ...

Pull thermal updates from Zhang Rui:
 "Specifics:

   - adds full support for 2 types of Thermal Controllers produced by
     STMicroelectronics.  One is a more traditional memory mapped
     variant, the other is controlled solely by system configuration
     registers.  From Lee Jones.

   - add TMU (Thermal Management Unit) support for Exynos3250 Soc.
     From Chanwoo Choi.

   - add critical and passive trip point support for int3403 thermal
     driver.  From Srinivas Pandruvada.

   - a couple of small fixes/cleanups from Javi Merino, and Geert
     Uytterhoeven"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
  thermal: document struct thermal_zone_device and thermal_governor
  thermal: cpu_cooling: fix typo highjack -> hijack
  thermal: rcar: Document SoC-specific bindings
  thermal: samsung: Add TMU support for Exynos3250 SoC
  thermal: exynos: fix ordering in exynos_tmu_remove()
  thermal: allow building dove_thermal with mvebu
  thermal: sti: Add support for ST's Memory Mapped based Thermal controller
  thermal: sti: Add support for ST's System Config Register based Thermal controller
  thermal: sti: Introduce ST Thermal core code
  thermal: sti: Supply Device Tree documentation
  Thermal: int3403: Add CRT and PSV trip

Conflicts:
	drivers/of/testcase-data/testcases.dts