Pull ARM SoC fixes from Olof Johansson:

 - A revert of all SCPI changes from the 4.15 merge window. They had
   regressions on the Amlogic platforms, and the submaintainer isn't
   around to fix these bugs due to vacation, etc. So we agreed to revert
   and revisit in next release cycle.

 - A series fixing a number of bugs for ARM CCN interconnect, around
   module unload, smp_processor_id() in preemptable context, and fixing
   some memory allocation failure checks.

 - A handful of devicetree fixes for different platforms, fixing
   warnings and errors that were previously ignored by the compiler.

 - The usual set of mostly minor fixes for different platforms.

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (42 commits)
  ARM64: dts: meson-gx: fix UART pclk clock name
  ARM: omap2: hide omap3_save_secure_ram on non-OMAP3 builds
  arm: dts: nspire: Add missing #phy-cells to usb-nop-xceiv
  ARM: dts: Fix dm814x missing phy-cells property
  ARM: dts: Fix elm interrupt compiler warning
  bus: arm-ccn: fix module unloading Error: Removing state 147 which has instances left.
  bus: arm-cci: Fix use of smp_processor_id() in preemptible context
  bus: arm-ccn: Fix use of smp_processor_id() in preemptible context
  bus: arm-ccn: Simplify code
  bus: arm-ccn: Check memory allocation failure
  bus: arm-ccn: constify attribute_group structures.
  firmware: arm_scpi: Revert updates made during v4.15 merge window
  arm: dts: marvell: Add missing #phy-cells to usb-nop-xceiv
  arm64: dts: sort vendor subdirectories in Makefile alphabetically
  meson-gx-socinfo: Fix package id parsing
  ARM: meson: fix spelling mistake: "Couln't" -> "Couldn't"
  ARM: dts: meson: fix the memory region of the GPIO interrupt controller
  ARM: dts: meson: correct the sort order for the the gpio_intc node
  MAINTAINERS: exclude other Socionext SoC DT files from ARM/UNIPHIER entry
  arm64: dts: uniphier: remove unnecessary interrupt-parent
  ...

Pull DeviceTree fixes from Rob Herring:
 "Another set of DT fixes:

   - Fixes from overlay code rework. A trifecta of fixes to the locking,
     an out of bounds access, and a memory leak in of_overlay_apply()

   - Clean-up at25 eeprom binding document

   - Remove leading '0x' in unit-addresses from binding docs"

* tag 'devicetree-fixes-for-4.15-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  of: overlay: Make node skipping in init_overlay_changeset() clearer
  of: overlay: Fix out-of-bounds write in init_overlay_changeset()
  of: overlay: Fix (un)locking in of_overlay_apply()
  of: overlay: Fix memory leak in of_overlay_apply() error path
  dt-bindings: eeprom: at25: Document device-specific compatible values
  dt-bindings: eeprom: at25: Grammar s/are can/can/
  dt-bindings: Remove leading 0x from bindings notation
  of: overlay: Remove else after goto
  of: Spelling s/changset/changeset/
  of: unittest: Remove bogus overlay mutex release from overlay_data_add()

Document the recommended presence of a device-specific compatible value,
and list examples that are already in use or soon will be.
This will allow checkpatch to validate compatible values in DTS.

Update the example to match current best practices (generic node name,
specific compatible value first).

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>

Improve the binding example by removing all the leading 0x to fix the
following dtc warnings:

Warning (unit_address_format): Node /XXX unit name should not have leading "0x"

Converted using the following command:

find Documentation/devicetree/bindings -name "*.txt" -exec sed -i -e 's/([^ ])\@0x([0-9a-f])/$1\@$2/g' {} +

This is a follow up to commit 48c926cd3414

Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Rob Herring <robh@kernel.org>

Pull GPIO fixes from Linus Walleij:
 "Three small fixes for GPIO. Not much, I'm surprised by the silence in
  my subsystems. All driver fixes:

   - fix a crash in the 74x164 driver

   - fix IRQ banks in the DaVinci driver

   - fix the vendor prefix in the PCA953x driver"

* tag 'gpio-v4.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio: pca953x: fix vendor prefix for PCA9654
  gpio: davinci: Assign first bank regs for unbanked case
  gpio: 74x164: Fix crash during .remove()

Despite commit 55020c8056a8 ("of: Add vendor prefix for ON Semiconductor
Corp.") was made long ago, the latter commit 9f49f6dd0473 ("gpio: pca953x:
add onsemi,pca9654 id") made use of another, undocumented vendor prefix.
Since such prefix doesn't seem to be used in any device trees, I think we
can just fix the "compatible" string in the driver and the bindings and be
done with that...

Fixes: 9f49f6dd0473 ("gpio: pca953x: add onsemi,pca9654 id")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

With a nxp,se97 chip on an atmel sama5d31 board, the I2C adapter driver
is not always capable of avoiding the 25-35 ms timeout as specified by
the SMBUS protocol. This may cause silent corruption of the last bit of
any transfer, e.g. a one is read instead of a zero if the sensor chip
times out. This also affects the eeprom half of the nxp-se97 chip, where
this silent corruption was originally noticed. Other I2C adapters probably
suffer similar issues, e.g. bit-banging comes to mind as risky...

The SMBUS register in the nxp chip is not a standard Jedec register, but
it is not special to the nxp chips either, at least the atmel chips
have the same mechanism. Therefore, do not special case this on the
manufacturer, it is opt-in via the device property anyway.

Cc: stable@vger.kernel.org # 4.9+
Signed-off-by: Peter Rosin <peda@axentia.se>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Pull more drm updates from Dave Airlie:
 "Fixes/cleanups for rc1, non-desktop flags for VR

   - remove the MSM dt-bindings file Rob managed to push in the previous
     pull.

   - add a property/edid quirk to denote HMD devices, I had these
     hanging around for a few weeks and Keith had done some work on
     them, they are fairly self contained and small, and only affect
     people using HTC Vive VR headsets so far.

   - amdgpu, tegra, tilcdc, fsl fixes

   - some imx-drm cleanups I missed, these seemed pretty small, and no
     reason to hold off.

  I have one TTM regression fix (fixes bochs-vga in qemu) sitting
  locally awaiting review I'll probably send that in a separate pull
  request tomorrow"

* tag 'drm-for-v4.15-part2' of git://people.freedesktop.org/~airlied/linux: (33 commits)
  dt-bindings: remove file that was added accidentally
  drm/edid: quirk HTC vive headset as non-desktop. [v2]
  drm/fb: add support for not enabling fbcon on non-desktop displays [v2]
  drm: add connector info/property for non-desktop displays [v2]
  drm/amdgpu: fix rmmod KCQ disable failed error
  drm/amdgpu: fix kernel hang when starting VNC server
  drm/amdgpu: don't skip attributes when powerplay is enabled
  drm/amd/pp: fix typecast error in powerplay.
  drm/tilcdc: Remove obsolete "ti,tilcdc,slave" dts binding support
  drm/tegra: sor: Reimplement pad clock
  Revert "drm/radeon: dont switch vt on suspend"
  drm/amd/amdgpu: fix over-bound accessing in amdgpu_cs_wait_any_fence
  drm/amd/powerplay: fix unfreeze level smc message for smu7
  drm/amdgpu:fix memleak
  drm/amdgpu:fix memleak in takedown
  drm/amd/pp: fix dpm randomly failed on Vega10
  drm/amdgpu: set f_mapping on exported DMA-bufs
  drm/amdgpu: Properly allocate VM invalidate eng v2
  drm/fsl-dcu: enable IRQ before drm_atomic_helper_resume()
  drm/fsl-dcu: avoid disabling pixel clock twice on suspend
  ...