Pull MIPS updates from Ralf Baechle:
 "These are the highlists of the main MIPS pull request for 4.4:

   - Add latencytop support
   - Support appended DTBs
   - VDSO support and initially use it for gettimeofday.
   - Drop the .MIPS.abiflags and ELF NOTE sections from vmlinux
   - Support for the 5KE, an internal test core.
   - Switch all MIPS platfroms to libata drivers.
   - Improved support, cleanups for ralink and Lantiq platforms.
   - Support for the new xilfpga platform.
   - A number of DTB improvments for BMIPS.
   - Improved support for CM and CPS.
   - Minor JZ4740 and BCM47xx enhancements"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (120 commits)
  MIPS: idle: add case for CPU_5KE
  MIPS: Octeon: Support APPENDED_DTB
  MIPS: vmlinux: create a section for appended DTB
  MIPS: Clean up compat_siginfo_t
  MIPS: Fix PAGE_MASK definition
  MIPS: BMIPS: Enable GZIP ramdisk and timed printks
  MIPS: Add xilfpga defconfig
  MIPS: xilfpga: Add mipsfpga platform code
  MIPS: xilfpga: Add xilfpga device tree files.
  dt-bindings: MIPS: Document xilfpga bindings and boot style
  MIPS: Make MIPS_CMDLINE_DTB default
  MIPS: Make the kernel arguments from dtb available
  MIPS: Use USE_OF as the guard for appended dtb
  MIPS: BCM63XX: Use pr_* instead of printk
  MIPS: Loongson: Cleanup CONFIG_LOONGSON_SUSPEND.
  MIPS: lantiq: Disable xbar fpi burst mode
  MIPS: lantiq: Force the crossbar to big endian
  MIPS: lantiq: Initialize the USB core on boot
  MIPS: lantiq: Return correct value for fpi clock on ar9
  MIPS: ralink: Add missing clock on rt305x
  ...

Pull more input updates from Dmitry Torokhov:
 "An update to the tsc2005 driver that allows it to also support tsc2004
  (basically the same controller, but uses i2c instead of spi bus), and
  a couple of bug fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: parkbd - drop bogus __init from parkbd_allocate_serio()
  Input: elantech - add Fujitsu Lifebook U745 to force crc_enabled
  Input: tsc2004 - add support for tsc2004
  Input: tsc200x-core - rename functions and variables
  Input: tsc2005 - separate SPI and core functions

Pull final round of SCSI updates from James Bottomley:
 "Sorry for the delay in this patch which was mostly caused by getting
  the merger of the mpt2/mpt3sas driver, which was seen as an essential
  item of maintenance work to do before the drivers diverge too much.
  Unfortunately, this caused a compile failure (detected by linux-next),
  which then had to be fixed up and incubated.

  In addition to the mpt2/3sas rework, there are updates from pm80xx,
  lpfc, bnx2fc, hpsa, ipr, aacraid, megaraid_sas, storvsc and ufs plus
  an assortment of changes including some year 2038 issues, a fix for a
  remove before detach issue in some drivers and a couple of other minor
  issues"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (141 commits)
  mpt3sas: fix inline markers on non inline function declarations
  sd: Clear PS bit before Mode Select.
  ibmvscsi: set max_lun to 32
  ibmvscsi: display default value for max_id, max_lun and max_channel.
  mptfusion: don't allow negative bytes in kbuf_alloc_2_sgl()
  scsi: pmcraid: replace struct timeval with ktime_get_real_seconds()
  mvumi: 64bit value for seconds_since1970
  be2iscsi: Fix bogus WARN_ON length check
  scsi_scan: don't dump trace when scsi_prep_async_scan() is called twice
  mpt3sas: Bump mpt3sas driver version to 09.102.00.00
  mpt3sas: Single driver module which supports both SAS 2.0 & SAS 3.0 HBAs
  mpt2sas, mpt3sas: Update the driver versions
  mpt3sas: setpci reset kernel oops fix
  mpt3sas: Added OEM Gen2 PnP ID branding names
  mpt3sas: Refcount fw_events and fix unsafe list usage
  mpt3sas: Refcount sas_device objects and fix unsafe list usage
  mpt3sas: sysfs attribute to report Backup Rail Monitor Status
  mpt3sas: Ported WarpDrive product SSS6200 support
  mpt3sas: fix for driver fails EEH, recovery from injected pci bus error
  mpt3sas: Manage MSI-X vectors according to HBA device type
  ...

Pull DeviceTree fixes from Rob Herring:

 - Add empty of_translate_address needed for HiSilicon network driver.

 - Fix alignment requirements for CMA regions in DT.

 - Fix booting on PPC systems which can't do WARN() early.

 - Rename ak4554 binding doc from .c to .txt.

* tag 'devicetree-fixes-for-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  of: Provide static inline function for of_translate_address if needed
  drivers: of: of_reserved_mem: fixup the alignment with CMA setup
  of: Print rather than WARN'ing when overlap check fails
  dt-bindings: ak4554: extension should be .txt

Pull pwm updates from Thierry Reding:
 "This round contains a couple of new drivers for the Marvell Berlin
  family of SoCs, various SoCs from Renesas and Broadcom as well as the
  backlight PWM present on MediaTek SoCs.

  Further existing drivers are extended to support a wider range of
  hardware.

  The remaining patches are minor fixes and cleanups across the board.

  Note that one of the patches included in this pull request is against
  arch/unicore32.  I've included it here because I couldn't get a
  response from Guan Xuetao and I consider the change low-risk.
  Equivalent patches have been merged and tested in Samsung and PXA
  trees.  The goal is to finally get rid of legacy code paths that have
  repeatedly been causing headaches"

* tag 'pwm/for-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (24 commits)
  pwm: sunxi: Fix whitespace issue
  pwm: sysfs: Make use of the DEVICE_ATTR_[RW][WO] macro's
  pwm: sysfs: Remove unnecessary temporary variable
  unicore32: nb0916: Use PWM lookup table
  pwm: pwm-rcar: Revise the device tree binding document about compatible
  pwm: Return -ENODEV if no PWM lookup match is found
  pwm: sun4i: Add support for PWM controller on sun5i SoCs
  pwm: Set enable state properly on failed call to enable
  pwm: lpss: Add support for runtime PM
  pwm: lpss: Add more Intel Broxton IDs
  pwm: lpss: Support all four PWMs on Intel Broxton
  pwm: lpss: Add support for multiple PWMs
  pwm-pca9685: enable ACPI device found on Galileo Gen2
  pwm: Add MediaTek display PWM driver support
  dt-bindings: pwm: Add MediaTek display PWM bindings
  pwm: tipwmss: Enable on TI DRA7x and AM437x
  pwm: atmel-hlcdc: add sama5d2 SoC support.
  pwm: Add Broadcom BCM7038 PWM controller support
  Documentation: dt: add Broadcom BCM7038 PWM controller binding
  pwm: Add support for R-Car PWM Timer
  ...

Pull thermal updates from Zhang Rui:

 - Implement generic devfreq cooling mechanism through frequency
   reduction for devices using devfreq.  From Ørjan Eide and Javi
   Merino.

 - Introduce OMAP3 support on TI SoC thermal driver.  From Pavel Mack
   and Eduardo Valentin.

 - A bounch of small fixes on devfreq_cooling, Exynos, IMX, Armada, and
   Rockchip thermal drivers.

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (24 commits)
  thermal: exynos: Directly return 0 instead of using local ret variable
  thermal: exynos: Remove unneeded semicolon
  thermal: exynos: Use IS_ERR() because regulator cannot be NULL
  thermal: exynos: Fix first temperature read after registering sensor
  thermal: exynos: Fix unbalanced regulator disable on probe failure
  devfreq_cooling: return on allocation failure
  thermal: rockchip: support the sleep pinctrl state to avoid glitches in s2r
  dt-bindings: rockchip-thermal: Add the pinctrl states in this document
  thermal: devfreq_cooling: Make power a u64
  thermal: devfreq_cooling: use a thermal_cooling_device for register and unregister
  thermal: underflow bug in imx_set_trip_temp()
  thermal: armada: Fix possible overflow in the Armada 380 thermal sensor formula
  thermal: imx: register irq handler later in probe
  thermal: rockhip: fix setting thermal shutdown polarity
  thermal: rockchip: fix handling of invalid readings
  devfreq_cooling: add trace information
  thermal: Add devfreq cooling
  PM / OPP: get the voltage for all OPPs
  tools/thermal: tmon: use pkg-config also for CFLAGS
  linux/thermal.h: rename KELVIN_TO_CELSIUS to DECI_KELVIN_TO_CELSIUS
  ...

Xilfpga boots only with device-tree. Document the required properties
and the unique boot style

Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Cc: robh+dt@kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/11361/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Pull networking fixes from David Miller:

 1) Fix null deref in xt_TEE netfilter module, from Eric Dumazet.

 2) Several spots need to get to the original listner for SYN-ACK
    packets, most spots got this ok but some were not.  Whilst covering
    the remaining cases, create a helper to do this.  From Eric Dumazet.

 3) Missiing check of return value from alloc_netdev() in CAIF SPI code,
    from Rasmus Villemoes.

 4) Don't sleep while != TASK_RUNNING in macvtap, from Vlad Yasevich.

 5) Use after free in mvneta driver, from Justin Maggard.

 6) Fix race on dst->flags access in dst_release(), from Eric Dumazet.

 7) Add missing ZLIB_INFLATE dependency for new qed driver.  From Arnd
    Bergmann.

 8) Fix multicast getsockopt deadlock, from WANG Cong.

 9) Fix deadlock in btusb, from Kuba Pawlak.

10) Some ipv6_add_dev() failure paths were not cleaning up the SNMP6
    counter state.  From Sabrina Dubroca.

11) Fix packet_bind() race, which can cause lost notifications, from
    Francesco Ruggeri.

12) Fix MAC restoration in qlcnic driver during bonding mode changes,
    from Jarod Wilson.

13) Revert bridging forward delay change which broke libvirt and other
    userspace things, from Vlad Yasevich.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (65 commits)
  Revert "bridge: Allow forward delay to be cfgd when STP enabled"
  bpf_trace: Make dependent on PERF_EVENTS
  qed: select ZLIB_INFLATE
  net: fix a race in dst_release()
  net: mvneta: Fix memory use after free.
  net: Documentation: Fix default value tcp_limit_output_bytes
  macvtap: Resolve possible __might_sleep warning in macvtap_do_read()
  mvneta: add FIXED_PHY dependency
  net: caif: check return value of alloc_netdev
  net: hisilicon: NET_VENDOR_HISILICON should depend on HAS_DMA
  drivers: net: xgene: fix RGMII 10/100Mb mode
  netfilter: nft_meta: use skb_to_full_sk() helper
  net_sched: em_meta: use skb_to_full_sk() helper
  sched: cls_flow: use skb_to_full_sk() helper
  netfilter: xt_owner: use skb_to_full_sk() helper
  smack: use skb_to_full_sk() helper
  net: add skb_to_full_sk() helper and use it in selinux_netlbl_skbuff_setsid()
  bpf: doc: correct arch list for supported eBPF JIT
  dwc_eth_qos: Delete an unnecessary check before the function call "of_node_put"
  bonding: fix panic on non-ARPHRD_ETHER enslave failure
  ...

Signed-off-by: Raphaël Poggi <poggi.raph@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Pull ARM DT updates from Olof Johansson:
 "As usual, this is the massive branch we have for each release.  Lots
  of various updates and additions of hardware descriptions on existing
  hardware, as well as the usual additions of new boards and SoCs.

  This is also the first release where we've started mixing 64- and
  32-bit DT updates in one branch.

  (Specific details on what's actually here and new is pretty easy to
  tell from the diffstat, so there's little point in duplicating listing
  it here)"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (499 commits)
  ARM: dts: uniphier: add system-bus-controller nodes
  ARM64: juno: disable NOR flash node by default
  ARM: dts: uniphier: add outer cache controller nodes
  arm64: defconfig: Enable PCI generic host bridge by default
  arm64: Juno: Add support for the PCIe host bridge on Juno R1
  Documentation: of: Document the bindings used by Juno R1 PCIe host bridge
  ARM: dts: uniphier: add I2C aliases for ProXstream2 boards
  dts/Makefile: Add build support for LS2080a QDS & RDB board DTS
  dts/ls2080a: Add DTS support for LS2080a QDS & RDB boards
  dts/ls2080a: Update Simulator DTS to add support of various peripherals
  dts/ls2080a: Remove text about writing to Free Software Foundation
  dts/ls2080a: Update DTSI to add support of various peripherals
  doc: DTS: Update DWC3 binding to provide reference to generic bindings
  doc/bindings: Update GPIO devicetree binding documentation for LS2080A
  Documentation/dts: Move FSL board-specific bindings out of /powerpc
  Documentation: DT: Add entry for FSL LS2080A QDS and RDB boards
  arm64: Rename FSL LS2085A SoC support code to LS2080A
  arm64: Use generic Layerscape SoC family naming
  ARM: dts: uniphier: add ProXstream2 Vodka board support
  ARM: dts: uniphier: add ProXstream2 Gentil board support
  ...