linux-toradex.git/Documentation/devicetree, branch v4.9.121

net: dsa: qca8k: Add QCA8334 binding documentation

2018-08-03T05:55:26+00:00

commit 218bbea11a777c156eb7bcbdc72867b32ae10985 upstream.

Add support for the four-port variant of the Qualcomm QCA833x switch.

The CPU port default link settings can be reconfigured using
a fixed-link sub-node.

Signed-off-by: Michal Vokáč 
Reviewed-by: Rob Herring 
Reviewed-by: Andrew Lunn 
Reviewed-by: Florian Fainelli 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

dt-bindings: net: meson-dwmac: new compatible name for AXG SoC

2018-08-03T05:55:24+00:00

[ Upstream commit 7e5d05e18ba1ed491c6f836edee7f0b90f3167bc ]

We need to introduce a new compatible name for the Meson-AXG SoC
in order to support the RMII 100M ethernet PHY, since the PRG_ETH0
register of the dwmac glue layer is changed from previous old SoC.

Signed-off-by: Yixun Lan 
Reviewed-by: Rob Herring 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

dt-bindings: pinctrl: meson: add support for the Meson8m2 SoC

2018-08-03T05:55:24+00:00

[ Upstream commit 03d9fbc39730b3e6b2e7047dc85f0f70de8fb97d ]

The Meson8m2 SoC is a variant of Meson8 with some updates from Meson8b
(such as the Gigabit capable DesignWare MAC).
It is mostly pin compatible with Meson8, only 10 (existing) CBUS pins
get an additional function (four of these are Ethernet RXD2, RXD3, TXD2
and TXD3 which are required when the board uses an RGMII PHY).
The AOBUS pins seem to be identical on Meson8 and Meson8m2.

Signed-off-by: Martin Blumenstingl 
Reviewed-by: Rob Herring 
Reviewed-by: Kevin Hilman 
Signed-off-by: Linus Walleij 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

net: dsa: b53: Add BCM5389 support

2018-06-26T00:08:05+00:00

[ Upstream commit a95691bc54af1ac4b12c354f91e9cabf1cb068df ]

This patch adds support for the BCM5389 switch connected through MDIO.

Signed-off-by: Damien Thébault 
Reviewed-by: Florian Fainelli 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

dmaengine: mv_xor_v2: Fix clock resource by adding a register clock

2018-05-30T05:50:36+00:00

[ Upstream commit 3cd2c313f1d618f92d1294addc6c685c17065761 ]

On the CP110 components which are present on the Armada 7K/8K SoC we need
to explicitly enable the clock for the registers. However it is not
needed for the AP8xx component, that's why this clock is optional.

With this patch both clock have now a name, but in order to be backward
compatible, the name of the first clock is not used. It allows to still
use this clock with a device tree using the old binding.

Reviewed-by: Rob Herring 
Signed-off-by: Vinod Koul 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

clk: meson: meson8b: add compatibles for Meson8 and Meson8m2

2018-04-13T17:48:28+00:00

[ Upstream commit 855f06a1009faabb0c6a3e9b49d115496d325856 ]

The clock controller on Meson8, Meson8b and Meson8m2 is very similar
based on the code from the Amlogic GPL kernel sources. Add separate
compatibles for each SoC to make sure that we can easily implement
all the small differences for each SoC later on.

In general the Meson8 and Meson8m2 seem to be almost identical as they
even share the same mach-meson8 directory in Amlogic's GPL kernel
sources.
The main clocks on Meson8, Meson8b and Meson8m2 are very similar,
because they are all using the same PLL values, 90% of the clock gates
are the same (the actual diffstat of the mach-meson8/clock.c and
mach-meson8b/clock.c files is around 30 to 40 lines, when excluding
all commented out code).
The difference between the Meson8 and Meson8b clock gates seem to be:
- Meson8 has AIU_PCLK, HDMI_RX, VCLK2_ENCT, VCLK2_ENCL, UART3,
  CSI_DIG_CLKIN gates which don't seem to be available on Meson8b
- the gate on Meson8 for bit 7 seems to be named "_1200XXX" instead
  of "PERIPHS_TOP" (on Meson8b)
- Meson8b has a SANA gate which doesn't seem to exist on Meson8 (or
  on Meson8 the same bit is used by the UART3 gate in Amlogic's GPL
  kernel sources)
None of these gates is added for now, since it's unclear whether these
definitions are actually correct (the VCLK2_ENCT gate for example is
defined, but only used in some commented block).

The main difference between all three SoCs seem to be the video (VPU)
clocks. Apart from different supported clock rates (according to vpu.c
in mach-meson8 and mach-meson8b from Amlogic's GPL kernel sources) the
most notable difference is that Meson8m2 has a GP_PLL clock and a mux
(probably the same as on the Meson GX SoCs) to support glitch-free
(clock rate) switching.
None of these VPU clocks are not supported by our mainline meson8b
clock driver yet though.

Signed-off-by: Martin Blumenstingl 
Acked-by: Rob Herring 
Acked-by: Kevin Hilman 
Signed-off-by: Jerome Brunet 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

dt-bindings: display: sun4i: Add allwinner,tcon-channel property

2018-04-13T17:48:15+00:00

[ Upstream commit 22662f12768f971809b478386d9cc4947d00497a ]

The Allwinner Timings Controller has two, mutually exclusive, channels.
When the binding has been introduced, it was assumed that there would be
only a single user per channel in the system.

While this is likely for the channel 0 which only connects to LCD displays,
it turns out that the channel 1 can be connected to multiple controllers in
the SoC (HDMI and TV encoders for example). And while the simultaneous use
of HDMI and TV outputs cannot be achieved, switching from one to the other
at runtime definitely sounds plausible.

Add an extra property, allwinner,tcon-channel, to specify for a given
endpoint which TCON channel it is connected to, while falling back to the
previous mechanism if that property is missing.

Acked-by: Chen-Yu Tsai 
Acked-by: Rob Herring 
Signed-off-by: Maxime Ripard 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

Documentation: pinctrl: palmas: Add ti,palmas-powerhold-override property definition

2018-04-08T10:12:59+00:00

commit 0ea66f76ba17a4b229caaadd77de694111b21769 upstream.

GPIO7 is configured in POWERHOLD mode which has higher priority
over DEV_ON bit and keeps the PMIC supplies on even after the DEV_ON
bit is turned off. This property enables driver to over ride the
POWERHOLD value to GPIO7 so as to turn off the PMIC in power off
scenarios.

Signed-off-by: Keerthy 
Acked-by: Rob Herring 
Signed-off-by: Linus Walleij 
Cc: Ben Hutchings 
Signed-off-by: Greg Kroah-Hartman

omapdrm: panel: fix compatible vendor string for td028ttec1

2018-03-24T10:00:25+00:00

[ Upstream commit c1b9d4c75cd549e08bd0596d7f9dcc20f7f6e8fa ]

The vendor name was "toppoly" but other panels and the vendor list
have defined it as "tpo". So let's fix it in driver and bindings.

We keep the old definition in parallel to stay compatible with
potential older DTB setup.

Signed-off-by: H. Nikolaus Schaller 
Signed-off-by: Tomi Valkeinen 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

dt-bindings: mfd: axp20x: Add "xpowers,master-mode" property for AXP806 PMICs

2018-03-24T10:00:16+00:00

[ Upstream commit 8461cf20d17e0090e9236b73d25b31be4f7fadc5 ]

commit b101829a029a ("mfd: axp20x: Fix AXP806 access errors on cold boot")
was intended to fix the case where a board uses an AXP806 in slave mode,
but the boot loader leaves it in master mode for lack of AXP806 support.
But now the driver breaks on boards where the PMIC is operating in master
mode. To let the device tree describe which mode of operation is needed,
this patch introduces a new property "xpowers,master-mode".

Fixes: 204ae2963e10 ("mfd: axp20x: Add bindings for AXP806 PMIC")
Signed-off-by: Rask Ingemann Lambertsen 
Acked-by: Chen-Yu Tsai 
Signed-off-by: Lee Jones 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman