Merge thermal control core fixes for 6.0-rc3:

 - Fix missing required property for thermal zone description (Daniel
   Lezcano).

 - Add missing export symbol for
   thermal_zone_device_register_with_trips() (Daniel Lezcano).

* thermal-core:
  dt-bindings: thermal: Fix missing required property
  thermal/core: Add missing EXPORT_SYMBOL_GPL

Pull drm fixes from Dave Airlie:
 "Regular weekly fixes.

  The nouveau patch just enables modesetting on GA103 hw which is like
  other ampere cards that are already supported. amdgpu has 2 weeks of
  fixes, as Alex was away, so a bit larger than usual, otherwise some
  i915 and misc other fixes.

  ttm:
   - NULL ptr dereference

  i915:
   - disable pci resize on 32-bit systems
   - don't leak the ccs state
   - TLB invalidation fixes

  nouveau:
   - GA103 enablement
   - off-by-one fix

  amdgpu:
   - Revert some DML stack changes
   - Rounding fixes in KFD allocations
   - atombios vram info table parsing fix
   - DCN 3.1.4 fixes
   - Clockgating fixes for various new IPs
   - SMU 13.0.4 fixes
   - DCN 3.1.4 FP fixes
   - TMDS fixes for YCbCr420 4k modes
   - DCN 3.2.x fixes
   - USB 4 fixes
   - SMU 13.0 fixes
   - SMU driver unload memory leak fixes
   - Display orientation fix
   - Regression fix for generic fbdev conversion
   - SDMA 6.x fixes
   - SR-IOV fixes
   - IH 6.x fixes
   - Use after free fix in bo list handling
   - Revert pipe1 support
   - XGMI hive reset fix

  amdkfd:
   - Fix potential crach in kfd_create_indirect_link_prop()

  imx:
   - warning fix

  meson:
   - refcounting fix

  lvds-codec:
   - error check fix

  sun4i:
   - underflow fix
   - dt-binding fix"

* tag 'drm-fixes-2022-08-19' of git://anongit.freedesktop.org/drm/drm: (109 commits)
  Revert "drm/amd/amdgpu: add pipe1 hardware support"
  drm/amdgpu: Fix use-after-free on amdgpu_bo_list mutex
  drm/amdgpu: Fix interrupt handling on ih_soft ring
  drm/amdgpu: Add secure display TA load for Renoir
  drm/amd/display: Include scaling factor for SubVP command
  drm/amdgpu/vcn: Return void from the stop_dbg_mode
  drm/amdgpu: remove useless condition in amdgpu_job_stop_all_jobs_on_sched()
  drm/amdgpu: Add decode_iv_ts helper for ih_v6 block
  drm/amd/display: add chip revision to DCN32
  drm/amd/display: avoid doing vm_init multiple time
  drm/amd/display: Use pitch when calculating size to cache in MALL
  drm/amd/display: Don't set DSC for phantom pipes
  drm/amd/display: Update clock table policy for DCN314
  drm/amd/display: Modify header inclusion pattern
  drm/amd/display: Fix plug/unplug external monitor will hang while playback MPO video
  drm/amd/display: Add debug parameter to retain default clock table
  drm/amdgpu: Increase tlb flush timeout for sriov
  drm/amd/display: do not compare integers of different widths
  drm/amd/display: Add reserved dc_log_type.
  drm/amd/display: Fix pixel clock programming
  ...

Pull networking fixes from Jakub Kicinski:
 "Including fixes from netfilter.

  Current release - regressions:

   - tcp: fix cleanup and leaks in tcp_read_skb() (the new way BPF
     socket maps get data out of the TCP stack)

   - tls: rx: react to strparser initialization errors

   - netfilter: nf_tables: fix scheduling-while-atomic splat

   - net: fix suspicious RCU usage in bpf_sk_reuseport_detach()

  Current release - new code bugs:

   - mlxsw: ptp: fix a couple of races, static checker warnings and
     error handling

  Previous releases - regressions:

   - netfilter:
      - nf_tables: fix possible module reference underflow in error path
      - make conntrack helpers deal with BIG TCP (skbs > 64kB)
      - nfnetlink: re-enable conntrack expectation events

   - net: fix potential refcount leak in ndisc_router_discovery()

  Previous releases - always broken:

   - sched: cls_route: disallow handle of 0

   - neigh: fix possible local DoS due to net iface start/stop loop

   - rtnetlink: fix module refcount leak in rtnetlink_rcv_msg

   - sched: fix adding qlen to qcpu->backlog in gnet_stats_add_queue_cpu

   - virtio_net: fix endian-ness for RSS

   - dsa: mv88e6060: prevent crash on an unused port

   - fec: fix timer capture timing in `fec_ptp_enable_pps()`

   - ocelot: stats: fix races, integer wrapping and reading incorrect
     registers (the change of register definitions here accounts for
     bulk of the changed LoC in this PR)"

* tag 'net-6.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (77 commits)
  net: moxa: MAC address reading, generating, validity checking
  tcp: handle pure FIN case correctly
  tcp: refactor tcp_read_skb() a bit
  tcp: fix tcp_cleanup_rbuf() for tcp_read_skb()
  tcp: fix sock skb accounting in tcp_read_skb()
  igb: Add lock to avoid data race
  dt-bindings: Fix incorrect "the the" corrections
  net: genl: fix error path memory leak in policy dumping
  stmmac: intel: Add a missing clk_disable_unprepare() call in intel_eth_pci_remove()
  net: ethernet: mtk_eth_soc: fix possible NULL pointer dereference in mtk_xdp_run
  net/mlx5e: Allocate flow steering storage during uplink initialization
  net: mscc: ocelot: report ndo_get_stats64 from the wraparound-resistant ocelot->stats
  net: mscc: ocelot: keep ocelot_stat_layout by reg address, not offset
  net: mscc: ocelot: make struct ocelot_stat_layout array indexable
  net: mscc: ocelot: fix race between ndo_get_stats64 and ocelot_check_stats_work
  net: mscc: ocelot: turn stats_lock into a spinlock
  net: mscc: ocelot: fix address of SYS_COUNT_TX_AGING counter
  net: mscc: ocelot: fix incorrect ndo_get_stats64 packet counters
  net: dsa: felix: fix ethtool 256-511 and 512-1023 TX packet counters
  net: dsa: don't warn in dsa_port_set_state_now() when driver doesn't support it
  ...

Lots of double occurrences of "the" were replaced by single occurrences,
but some of them should become "to the" instead.

Fixes: 12e5bde18d7f6ca4 ("dt-bindings: Fix typo in comment")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/c5743c0a1a24b3a8893797b52fed88b99e56b04b.1660755148.git.geert+renesas@glider.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

One patch for imx/dcss to get rid of a warning message, one off-by-one
fix and GA103 support for nouveau, a refcounting fix for meson, a NULL
pointer dereference fix for ttm, a error check fix for lvds-codec, a
dt-binding schema fix and an underflow fix for sun4i

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220816094401.wtadc7ddr6lzq6aj@houat

Pull spi fixes from Mark Brown:
 "A few fixes that came in since my pull request, the Meson fix is a
  little large since it's fixing all possible cases of the problem that
  was observed with the driver and clock API trying to share
  configuration by integrating the device clocking fully with the clock
  API rather than spot fixing the one instance that was observed"

* tag 'spi-fix-v6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: dt-bindings: Drop Pratyush Yadav
  spi: meson-spicc: add local pow2 clock ops to preserve rate between messages
  MAINTAINERS: rectify entry for ARM/HPE GXP ARCHITECTURE
  spi: spi.c: Add missing __percpu annotations in users of spi_statistics

Pull regulator fixes from Mark Brown:
 "A couple of small fixes that came in since my pull request, nothing
  major here"

* tag 'regulator-fix-v6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: core: Fix missing error return from regulator_bulk_get()
  regulator: pca9450: Remove restrictions for regulator-name

When the thermal zone description was converted to yaml schema, the
required 'trips' property was forgotten.

The initial text bindings was describing:

"
[ ... ]

* Thermal zone nodes

The thermal zone node is the node containing all the required info
for describing a thermal zone, including its cooling device bindings. The
thermal zone node must contain, apart from its own properties, one sub-node
containing trip nodes and one sub-node containing all the zone cooling maps.

Required properties:
- polling-delay:        The maximum number of milliseconds to wait between polls
  Type: unsigned        when checking this thermal zone.
  Size: one cell

- polling-delay-passive: The maximum number of milliseconds to wait
  Type: unsigned        between polls when performing passive cooling.
  Size: one cell

- thermal-sensors:      A list of thermal sensor phandles and sensor specifier
  Type: list of         used while monitoring the thermal zone.
  phandles + sensor
  specifier

- trips:                A sub-node which is a container of only trip point nodes
  Type: sub-node        required to describe the thermal zone.

Optional property:
- cooling-maps:         A sub-node which is a container of only cooling device
  Type: sub-node        map nodes, used to describe the relation between trips
                        and cooling devices.
  [ ... ]

"

Now the schema describes:

"
    [ ... ]

    required:
      - polling-delay
      - polling-delay-passive
      - thermal-sensors

    [ ... ]
"

Add the missing 'trips' property in the required properties.

Fixed: 1202a442a31fd ("dt-bindings: thermal: Add yaml bindings for thermal zones")
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220809085629.509116-3-daniel.lezcano@linaro.org

When adding the D1 TCON bindings, I missed the conditional blocks that
restrict the binding for TCON LCD vs TCON TV hardware. Add the D1 TCON
variants to the appropriate blocks for DE2 TCON LCDs and TCON TVs.

Fixes: ae5a5d26c15c ("dt-bindings: display: Add D1 display engine compatibles")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220812073702.57618-1-samuel@sholland.org

Pull more i2c updates from Wolfram Sang:

 - two driver fixes for issues introduced this cycle

 - one trivial driver improvement regarding ACPI

 - more DTS conversion and additions

 - documentation updates

 - subsystem-wide move from strlcpy to strscpy

* tag 'i2c-for-5.20-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  docs: i2c: i2c-sysfs: fix hyperlinks
  docs: i2c: i2c-sysfs: improve wording
  docs: i2c: instantiating-devices: add syntax coloring to dts and C blocks
  docs: i2c: smbus-protocol: improve DataLow/DataHigh definition
  docs: i2c: i2c-protocol: remove unused legend items
  docs: i2c: i2c-protocol,smbus-protocol: remove nonsense words
  docs: i2c: i2c-protocol: update introductory paragraph
  i2c: move core from strlcpy to strscpy
  i2c: move drivers from strlcpy to strscpy
  i2c: kempld: Support ACPI I2C device declaration
  i2c: mediatek: add i2c compatible for MT8188
  dt-bindings: i2c: update bindings for mt8188 soc
  i2c: microchip-corei2c: fix erroneous late ack send
  dt-bindings: i2c: qcom,i2c-cci: convert to dtschema
  i2c: qcom-geni: Fix GPI DMA buffer sync-back