Pull tty/serial driver fixes from Greg KH:
 "Here are five small serial and tty and vt fixes for 6.16-rc4. Included
  in here are:

   - kerneldoc fixes for recent vt changes

   - imx serial driver fix

   - of_node sysfs fix for a regression

   - vt missing notification fix

   - 8250 dt bindings fix

  All of these have been in linux-next for a while with no reported issues"

* tag 'tty-6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  dt-bindings: serial: 8250: Make clocks and clock-frequency exclusive
  serial: imx: Restore original RXTL for console to fix data loss
  serial: core: restore of_node information in sysfs
  vt: fix kernel-doc warnings in ucs_get_fallback()
  vt: add missing notification when switching back to text mode

Pull devicetree fixes from Rob Herring:

 - Convert altr,uart-1.0 and altr,juart-1.0 to DT schema. These were
   applied for nios2, but never sent upstream.

 - Fix extra '/' in fsl,ls1028a-reset '$id' path

 - Fix warnings in ti,sn65dsi83 schema due to unnecessary $ref.

* tag 'devicetree-fixes-for-6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: serial: Convert altr,uart-1.0 to DT schema
  dt-bindings: serial: Convert altr,juart-1.0 to DT schema
  dt-bindings: soc: fsl,ls1028a-reset: Drop extra "/" in $id
  dt-bindings: drm/bridge: ti-sn65dsi83: drop $ref to fix lvds-vod* warnings

The 8250 binding before converting to json-schema states,

  - clock-frequency : the input clock frequency for the UART
  	or
  - clocks phandle to refer to the clk used as per Documentation/devicetree

for clock-related properties, where "or" indicates these properties
shouldn't exist at the same time.

Additionally, the behavior of Linux's driver is strange when both clocks
and clock-frequency are specified: it ignores clocks and obtains the
frequency from clock-frequency, left the specified clocks unclaimed. It
may even be disabled, which is undesired most of the time.

But "anyOf" doesn't prevent these two properties from coexisting, as it
considers the object valid as long as there's at LEAST one match.

Let's switch to "oneOf" and disallows the other property if one exists,
precisely matching the original binding and avoiding future confusion on
the driver's behavior.

Fixes: e69f5dc623f9 ("dt-bindings: serial: Convert 8250 to json-schema")
Cc: stable <stable@kernel.org>
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250623093445.62327-1-ziyao@disroot.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull i2c fixes from Wolfram Sang:

 - subsystem: convert drivers to use recent callbacks of struct
   i2c_algorithm A typical after-rc1 cleanup, which I couldn't send in
   time for rc2

 - tegra: fix YAML conversion of device tree bindings

 - k1: re-add a check which got lost during upstreaming

* tag 'i2c-for-6.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: k1: check for transfer error
  i2c: use inclusive callbacks in struct i2c_algorithm
  dt-bindings: i2c: nvidia,tegra20-i2c: Specify the required properties

Pull libnvdimm fix from Ira Weiny:
 "This converts the pmem-region device tree bindings to YAML to fix
  errors and bring it up to date"

* tag 'libnvdimm-fixes-6.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  dt-bindings: pmem: Convert binding to YAML

Specify the properties which are essential and which are not for the
Tegra I2C driver to function correctly. This was not added correctly when
the TXT binding was converted to yaml. All the existing DT nodes have
these properties already and hence this does not break the ABI.

dmas and dma-names which were specified as a must in the TXT binding
is now made optional since the driver can work in PIO mode if dmas are
missing.

Fixes: f10a9b722f80 ("dt-bindings: i2c: tegra: Convert to json-schema”)
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Cc: <stable@vger.kernel.org> # v5.17+
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Andi Shyti <andi@smida.it>
Link: https://lore.kernel.org/r/20250603153022.39434-1-akhilrajeev@nvidia.com

Convert the Altera JTAG UART binding to DT schema. The "ALTR,uart-1.0"
compatible has long been deprecated, so drop it.

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>

Convert the Altera JTAG UART binding to DT schema. The "ALTR,juart-1.0"
compatible has long been deprecated, so drop it.

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>

Convert the PMEM device tree binding from text to YAML. This will allow
device trees with pmem-region nodes to pass dtbs_check.

[iweiny: fix ups from Rob/Drew]

Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Drew Fustini <drew@pdp7.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Link: https://patch.msgid.link/20250606184405.359812-4-drew@pdp7.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>

The $id value has a double "//". Drop it.

Fixes: 9ca5a7d9d2e0 ("dt-bindings: soc: fsl: Add fsl,ls1028a-reset for reset syscon node")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250507215903.2748698-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>