Pull char / misc / iio driver updates from Greg KH:
 "Here is the big char/misc/iio and other small driver subsystem pull
  request for 6.16-rc1.

  Overall, a lot of individual changes, but nothing major, just the
  normal constant forward progress of new device support and cleanups to
  existing subsystems. Highlights in here are:

   - Large IIO driver updates and additions and device tree changes

   - Android binder bugfixes and logfile fixes

   - mhi driver updates

   - comedi driver updates

   - counter driver updates and additions

   - coresight driver updates and additions

   - echo driver removal as there are no in-kernel users of it

   - nvmem driver updates

   - spmi driver updates

   - new amd-sbi driver "subsystem" and drivers added

   - rust miscdriver binding documentation fix

   - other small driver fixes and updates (uio, w1, acrn, hpet,
     xillybus, cardreader drivers, fastrpc and others)

  All of these have been in linux-next for quite a while with no
  reported problems"

* tag 'char-misc-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (390 commits)
  binder: fix yet another UAF in binder_devices
  counter: microchip-tcb-capture: Add watch validation support
  dt-bindings: iio: adc: Add ROHM BD79100G
  iio: adc: add support for Nuvoton NCT7201
  dt-bindings: iio: adc: add NCT7201 ADCs
  iio: chemical: Add driver for SEN0322
  dt-bindings: trivial-devices: Document SEN0322
  iio: adc: ad7768-1: reorganize driver headers
  iio: bmp280: zero-init buffer
  iio: ssp_sensors: optimalize -> optimize
  HID: sensor-hub: Fix typo and improve documentation
  iio: admv1013: replace redundant ternary operator with just len
  iio: chemical: mhz19b: Fix error code in probe()
  iio: adc: at91-sama5d2: use IIO_DECLARE_BUFFER_WITH_TS
  iio: accel: sca3300: use IIO_DECLARE_BUFFER_WITH_TS
  iio: adc: ad7380: use IIO_DECLARE_DMA_BUFFER_WITH_TS
  iio: adc: ad4695: rename AD4695_MAX_VIN_CHANNELS
  iio: adc: ad4695: use IIO_DECLARE_DMA_BUFFER_WITH_TS
  iio: introduce IIO_DECLARE_BUFFER_WITH_TS macros
  iio: make IIO_DMA_MINALIGN minimum of 8 bytes
  ...

Pull dmaengine updates from Vinod Koul:
 "A fairly small update for the dmaengine subsystem. This has a new ARM
  dmaengine driver and couple of new device support and few driver
  changes:

  New support:
   - Renesas RZ/V2H(P) dma support for r9a09g057
   - Arm DMA-350 driver
   - Tegra Tegra264 ADMA support

  Updates:
   - AMD ptdma driver code removal and optimizations
   - Freescale edma error interrupt handler support"

* tag 'dmaengine-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (27 commits)
  dmaengine: idxd: Remove unused pointer and macro
  arm64: dts: renesas: r9a09g057: Add DMAC nodes
  dmaengine: sh: rz-dmac: Add RZ/V2H(P) support
  dmaengine: sh: rz-dmac: Allow for multiple DMACs
  irqchip/renesas-rzv2h: Add rzv2h_icu_register_dma_req()
  dt-bindings: dma: rz-dmac: Document RZ/V2H(P) family of SoCs
  dt-bindings: dma: rz-dmac: Restrict properties for RZ/A1H
  dmaengine: idxd: Narrow the restriction on BATCH to ver. 1 only
  dmaengine: ti: Add NULL check in udma_probe()
  fsldma: Set correct dma_mask based on hw capability
  dmaengine: idxd: Check availability of workqueue allocated by idxd wq driver before using
  dmaengine: xilinx_dma: Set dma_device directions
  dmaengine: tegra210-adma: Add Tegra264 support
  dt-bindings: Document Tegra264 ADMA support
  dmaengine: dw-edma: Add HDMA NATIVE map check
  dmaegnine: fsl-edma: add edma error interrupt handler
  dt-bindings: dma: fsl-edma: increase maxItems of interrupts and interrupt-names
  dmaengine: ARM_DMA350 should depend on ARM/ARM64
  dt-bindings: dma: qcom,bam: Document dma-coherent property
  dmaengine: Add Arm DMA-350 driver
  ...

Pull pci updates from Bjorn Helgaas:
 "Enumeration:

   - Print the actual delay time in pci_bridge_wait_for_secondary_bus()
     instead of assuming it was 1000ms (Wilfred Mallawa)

   - Revert 'iommu/amd: Prevent binding other PCI drivers to IOMMU PCI
     devices', which broke resume from system sleep on AMD platforms and
     has been fixed by other commits (Lukas Wunner)

  Resource management:

   - Remove mtip32xx use of pcim_iounmap_regions(), which is deprecated
     and unnecessary (Philipp Stanner)

   - Remove pcim_iounmap_regions() and pcim_request_region_exclusive()
     and related flags since all uses have been removed (Philipp
     Stanner)

   - Rework devres 'request' functions so they are no longer 'hybrid',
     i.e., their behavior no longer depends on whether
     pcim_enable_device or pci_enable_device() was used, and remove
     related code (Philipp Stanner)

   - Warn (not BUG()) about failure to assign optional resources (Ilpo
     Järvinen)

  Error handling:

   - Log the DPC Error Source ID only when it's actually valid (when
     ERR_FATAL or ERR_NONFATAL was received from a downstream device)
     and decode into bus/device/function (Bjorn Helgaas)

   - Determine AER log level once and save it so all related messages
     use the same level (Karolina Stolarek)

   - Use KERN_WARNING, not KERN_ERR, when logging PCIe Correctable
     Errors (Karolina Stolarek)

   - Ratelimit PCIe Correctable and Non-Fatal error logging, with sysfs
     controls on interval and burst count, to avoid flooding logs and
     RCU stall warnings (Jon Pan-Doh)

  Power management:

   - Increment PM usage counter when probing reset methods so we don't
     try to read config space of a powered-off device (Alex Williamson)

   - Set all devices to D0 during enumeration to ensure ACPI opregion is
     connected via _REG (Mario Limonciello)

  Power control:

   - Rename pwrctrl Kconfig symbols from 'PWRCTL' to 'PWRCTRL' to match
     the filename paths. Retain old deprecated symbols for
     compatibility, except for the pwrctrl slot driver
     (PCI_PWRCTRL_SLOT) (Johan Hovold)

   - When unregistering pwrctrl, cancel outstanding rescan work before
     cleaning up data structures to avoid use-after-free issues (Brian
     Norris)

  Bandwidth control:

   - Simplify link bandwidth controller by replacing the count of Link
     Bandwidth Management Status (LBMS) events with a PCI_LINK_LBMS_SEEN
     flag (Ilpo Järvinen)

   - Update the Link Speed after retraining, since the Link Speed may
     have changed (Ilpo Järvinen)

  PCIe native device hotplug:

   - Ignore Presence Detect Changed caused by DPC.

     pciehp already ignores Link Down/Up events caused by DPC, but on
     slots using in-band presence detect, DPC causes a spurious Presence
     Detect Changed event (Lukas Wunner)

   - Ignore Link Down/Up caused by Secondary Bus Reset.

     On hotplug ports using in-band presence detect, the reset causes a
     Presence Detect Changed event, which mistakenly caused teardown and
     re-enumeration of the device. Drivers may need to annotate code
     that resets their device (Lukas Wunner)

  Virtualization:

   - Add an ACS quirk for Loongson Root Ports that don't advertise ACS
     but don't allow peer-to-peer transactions between Root Ports; the
     quirk allows each Root Port to be in a separate IOMMU group (Huacai
     Chen)

  Endpoint framework:

   - For fixed-size BARs, retain both the actual size and the possibly
     larger size allocated to accommodate iATU alignment requirements
     (Jerome Brunet)

   - Simplify ctrl/SPAD space allocation and avoid allocating more space
     than needed (Jerome Brunet)

   - Correct MSI-X PBA offset calculations for DesignWare and Cadence
     endpoint controllers (Niklas Cassel)

   - Align the return value (number of interrupts) encoding for
     pci_epc_get_msi()/pci_epc_ops::get_msi() and
     pci_epc_get_msix()/pci_epc_ops::get_msix() (Niklas Cassel)

   - Align the nr_irqs parameter encoding for
     pci_epc_set_msi()/pci_epc_ops::set_msi() and
     pci_epc_set_msix()/pci_epc_ops::set_msix() (Niklas Cassel)

  Common host controller library:

   - Convert pci-host-common to a library so platforms that don't need
     native host controller drivers don't need to include these helper
     functions (Manivannan Sadhasivam)

  Apple PCIe controller driver:

   - Extract ECAM bridge creation helper from pci_host_common_probe() to
     separate driver-specific things like MSI from PCI things (Marc
     Zyngier)

   - Dynamically allocate RID-to_SID bitmap to prepare for SoCs with
     varying capabilities (Marc Zyngier)

   - Skip ports disabled in DT when setting up ports (Janne Grunau)

   - Add t6020 compatible string (Alyssa Rosenzweig)

   - Add T602x PCIe support (Hector Martin)

   - Directly set/clear INTx mask bits because T602x dropped the
     accessors that could do this without locking (Marc Zyngier)

   - Move port PHY registers to their own reg items to accommodate
     T602x, which moves them around; retain default offsets for existing
     DTs that lack phy%d entries with the reg offsets (Hector Martin)

   - Stop polling for core refclk, which doesn't work on T602x and the
     bootloader has already done anyway (Hector Martin)

   - Use gpiod_set_value_cansleep() when asserting PERST# in probe
     because we're allowed to sleep there (Hector Martin)

  Cadence PCIe controller driver:

   - Drop a runtime PM 'put' to resolve a runtime atomic count underflow
     (Hans Zhang)

   - Make the cadence core buildable as a module (Kishon Vijay Abraham I)

   - Add cdns_pcie_host_disable() and cdns_pcie_ep_disable() for use by
     loadable drivers when they are removed (Siddharth Vadapalli)

  Freescale i.MX6 PCIe controller driver:

   - Apply link training workaround only on IMX6Q, IMX6SX, IMX6SP
     (Richard Zhu)

   - Remove redundant dw_pcie_wait_for_link() from
     imx_pcie_start_link(); since the DWC core does this, imx6 only
     needs it when retraining for a faster link speed (Richard Zhu)

   - Toggle i.MX95 core reset to align with PHY powerup (Richard Zhu)

   - Set SYS_AUX_PWR_DET to work around i.MX95 ERR051624 erratum: in
     some cases, the controller can't exit 'L23 Ready' through Beacon or
     PERST# deassertion (Richard Zhu)

   - Clear GEN3_ZRXDC_NONCOMPL to work around i.MX95 ERR051586 erratum:
     controller can't meet 2.5 GT/s ZRX-DC timing when operating at 8
     GT/s, causing timeouts in L1 (Richard Zhu)

   - Wait for i.MX95 PLL lock before enabling controller (Richard Zhu)

   - Save/restore i.MX95 LUT for suspend/resume (Richard Zhu)

  Mobiveil PCIe controller driver:

   - Return bool (not int) for link-up check in
     mobiveil_pab_ops.link_up() and layerscape-gen4, mobiveil (Hans
     Zhang)

  NVIDIA Tegra194 PCIe controller driver:

   - Create debugfs directory for 'aspm_state_cnt' only when
     CONFIG_PCIEASPM is enabled, since there are no other entries (Hans
     Zhang)

  Qualcomm PCIe controller driver:

   - Add OF support for parsing DT 'eq-presets-<N>gts' property for lane
     equalization presets (Krishna Chaitanya Chundru)

   - Read Maximum Link Width from the Link Capabilities register if DT
     lacks 'num-lanes' property (Krishna Chaitanya Chundru)

   - Add Physical Layer 64 GT/s Capability ID and register offsets for
     8, 32, and 64 GT/s lane equalization registers (Krishna Chaitanya
     Chundru)

   - Add generic dwc support for configuring lane equalization presets
     (Krishna Chaitanya Chundru)

   - Add DT and driver support for PCIe on IPQ5018 SoC (Nitheesh Sekar)

  Renesas R-Car PCIe controller driver:

   - Describe endpoint BAR 4 as being fixed size (Jerome Brunet)

   - Document how to obtain R-Car V4H (r8a779g0) controller firmware
     (Yoshihiro Shimoda)

  Rockchip PCIe controller driver:

   - Reorder rockchip_pci_core_rsts because
     reset_control_bulk_deassert() deasserts in reverse order, to fix a
     link training regression (Jensen Huang)

   - Mark RK3399 as being capable of raising INTx interrupts (Niklas
     Cassel)

  Rockchip DesignWare PCIe controller driver:

   - Check only PCIE_LINKUP, not LTSSM status, to determine whether the
     link is up (Shawn Lin)

   - Increase N_FTS (used in L0s->L0 transitions) and enable ASPM L0s
     for Root Complex and Endpoint modes (Shawn Lin)

   - Hide the broken ATS Capability in rockchip_pcie_ep_init() instead
     of rockchip_pcie_ep_pre_init() so it stays hidden after PERST#
     resets non-sticky registers (Shawn Lin)

   - Call phy_power_off() before phy_exit() in rockchip_pcie_phy_deinit()
     (Diederik de Haas)

  Synopsys DesignWare PCIe controller driver:

   - Set PORT_LOGIC_LINK_WIDTH to one lane to make initial link training
     more robust; this will not affect the intended link width if all
     lanes are functional (Wenbin Yao)

   - Return bool (not int) for link-up check in dw_pcie_ops.link_up()
     and armada8k, dra7xx, dw-rockchip, exynos, histb, keembay,
     keystone, kirin, meson, qcom, qcom-ep, rcar_gen4, spear13xx,
     tegra194, uniphier, visconti (Hans Zhang)

   - Add debugfs support for exposing DWC device-specific PTM context
     (Manivannan Sadhasivam)

  TI J721E PCIe driver:

   - Make j721e buildable as a loadable and removable module (Siddharth
     Vadapalli)

   - Fix j721e host/endpoint dependencies that result in link failures
     in some configs (Arnd Bergmann)

  Device tree bindings:

   - Add qcom DT binding for 'global' interrupt (PCIe controller and
     link-specific events) for ipq8074, ipq8074-gen3, ipq6018, sa8775p,
     sc7280, sc8180x sdm845, sm8150, sm8250, sm8350 (Manivannan
     Sadhasivam)

   - Add qcom DT binding for 8 MSI SPI interrupts for msm8998, ipq8074,
     ipq8074-gen3, ipq6018 (Manivannan Sadhasivam)

   - Add dw rockchip DT binding for rk3576 and rk3562 (Kever Yang)

   - Correct indentation and style of examples in brcm,stb-pcie,
     cdns,cdns-pcie-ep, intel,keembay-pcie-ep, intel,keembay-pcie,
     microchip,pcie-host, rcar-pci-ep, rcar-pci-host, xilinx-versal-cpm
     (Krzysztof Kozlowski)

   - Convert Marvell EBU (dove, kirkwood, armada-370, armada-xp) and
     armada8k from text to schema DT bindings (Rob Herring)

   - Remove obsolete .txt DT bindings for content that has been moved to
     schemas (Rob Herring)

   - Add qcom DT binding for MHI registers in IPQ5332, IPQ6018, IPQ8074
     and IPQ9574 (Varadarajan Narayanan)

   - Convert v3,v360epc-pci from text to DT schema binding (Rob Herring)

   - Change microchip,pcie-host DT binding to be 'dma-noncoherent' since
     PolarFire may be configured that way (Conor Dooley)

  Miscellaneous:

   - Drop 'pci' suffix from intel_mid_pci.c filename to match similar
     files (Andy Shevchenko)

   - All platforms with PCI have an MMU, so add PCI Kconfig dependency
     on MMU to simplify build testing and avoid inadvertent build
     regressions (Arnd Bergmann)

   - Update Krzysztof Wilczyński's email address in MAINTAINERS
     (Krzysztof Wilczyński)

   - Update Manivannan Sadhasivam's email address in MAINTAINERS
     (Manivannan Sadhasivam)"

* tag 'pci-v6.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (147 commits)
  MAINTAINERS: Update Manivannan Sadhasivam email address
  PCI: j721e: Fix host/endpoint dependencies
  PCI: j721e: Add support to build as a loadable module
  PCI: cadence-ep: Introduce cdns_pcie_ep_disable() helper for cleanup
  PCI: cadence-host: Introduce cdns_pcie_host_disable() helper for cleanup
  PCI: cadence: Add support to build pcie-cadence library as a kernel module
  MAINTAINERS: Update Krzysztof Wilczyński email address
  PCI: Remove unnecessary linesplit in __pci_setup_bridge()
  PCI: WARN (not BUG()) when we fail to assign optional resources
  PCI: Remove unused pci_printk()
  PCI: qcom: Replace PERST# sleep time with proper macro
  PCI: dw-rockchip: Replace PERST# sleep time with proper macro
  PCI: host-common: Convert to library for host controller drivers
  PCI/ERR: Remove misleading TODO regarding kernel panic
  PCI: cadence: Remove duplicate message code definitions
  PCI: endpoint: Align pci_epc_set_msix(), pci_epc_ops::set_msix() nr_irqs encoding
  PCI: endpoint: Align pci_epc_set_msi(), pci_epc_ops::set_msi() nr_irqs encoding
  PCI: endpoint: Align pci_epc_get_msix(), pci_epc_ops::get_msix() return value encoding
  PCI: endpoint: Align pci_epc_get_msi(), pci_epc_ops::get_msi() return value encoding
  PCI: cadence-ep: Correct PBA offset in .set_msix() callback
  ...

Pull Compute Express Link (CXL) updates from Dave Jiang:

 - Remove always true condition in cxl features code

 - Add verification of CHBS length for CXL 2.0

 - Ignore interleave granularity when interleave ways is 1

 - Add update addressing mising MODULE_DESCRIPTION for cxl_test

 - A series of cleanups/refactor to prep for AMD Zen5 translate code

 - Clean %pa debug printk in core/hdm.c

 - Documentation updates:
     - Update to CXL Maturity Map
     - Fixes to source linking in CXL documentation
     - CXL documentation fixes, spelling corrections
     - A large collection of CXL documentation for the entire CXL
       subsystem, including documentation on CXL related platform and
       firmware notes

 - Remove redundant code of cxlctl_get_supported_features()

 - Series to support CXL RAS Features
     - Including "Patrol Scrub Control", "Error Check Scrub",
       "Performance Maitenance" and "Memory Sparing". The series
       connects CXL to EDAC.

* tag 'cxl-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (53 commits)
  cxl/edac: Add CXL memory device soft PPR control feature
  cxl/edac: Add CXL memory device memory sparing control feature
  cxl/edac: Support for finding memory operation attributes from the current boot
  cxl/edac: Add support for PERFORM_MAINTENANCE command
  cxl/edac: Add CXL memory device ECS control feature
  cxl/edac: Add CXL memory device patrol scrub control feature
  cxl: Update prototype of function get_support_feature_info()
  EDAC: Update documentation for the CXL memory patrol scrub control feature
  cxl/features: Remove the inline specifier from to_cxlfs()
  cxl/feature: Remove redundant code of get supported features
  docs: ABI: Fix "firwmare" to "firmware"
  cxl/Documentation: Fix typo in sysfs write_bandwidth attribute path
  cxl: doc/linux/access-coordinates Update access coordinates calculation methods
  cxl: docs/platform/acpi/srat Add generic target documentation
  cxl: docs/platform/cdat reference documentation
  Documentation: Update the CXL Maturity Map
  cxl: Sync up the driver-api/cxl documentation
  cxl: docs - add self-referencing cross-links
  cxl: docs/allocation/hugepages
  cxl: docs/allocation/reclaim
  ...

Pull IPMI updates from Corey Minyard:
 "Restructure the IPMI driver.

  This is a restructure of the IPMI driver, mostly to remove SRCU. The
  locking had issues, and they were not going to be straightforward to
  fix. Plus it used tons of memory and was generally a pain.

  Most of this moves handling of messages out of bh and interrupt
  context and runs it in thread context. Then getting rid of SRCU is
  easy.

  This also has a minor cleanup to remove a warning on newer GCCs and to
  fix some documentation"

* tag 'for-linus-6.16-1' of https://github.com/cminyard/linux-ipmi: (26 commits)
  docs: ipmi: fix spelling and grammar mistakes
  ipmi:msghandler: Fix potential memory corruption in ipmi_create_user()
  ipmi:watchdog: Use the new interface for panic messages
  ipmi:msghandler: Export and fix panic messaging capability
  Documentation:ipmi: Remove comments about interrupt level
  ipmi:ssif: Fix a shutdown race
  ipmi:msghandler: Don't deliver messages to deleted users
  ipmi:si: Rework startup of IPMI devices
  ipmi:msghandler: Add a error return from unhandle LAN cmds
  ipmi:msghandler: Shut down lower layer first at unregister
  ipmi:msghandler: Remove proc_fs.h
  ipmi:msghandler: Don't check for shutdown when returning responses
  ipmi:msghandler: Don't acquire a user refcount for queued messages
  ipmi:msghandler: Fix locking around users and interfaces
  ipmi:msghandler: Remove some user level processing in panic mode
  ipmi: Add a note about the pretimeout callback
  ipmi:watchdog: Change lock to mutex
  ipmi:msghandler: Remove srcu for the ipmi_interfaces list
  ipmi:msghandler: Remove srcu from the ipmi user structure
  ipmi:msghandler: Use the system_wq, not system_bh_wq
  ...

Pull trusted security manager (TSM) updates from Dan Williams:

 - Add a general sysfs scheme for publishing "Measurement" values
   provided by the architecture's TEE Security Manager. Use it to
   publish TDX "Runtime Measurement Registers" ("RTMRs") that either
   maintain a hash of stored values (similar to a TPM PCR) or provide
   statically provisioned data. These measurements are validated by a
   relying party.

 - Reorganize the drivers/virt/coco/ directory for "host" and "guest"
   shared infrastructure.

 - Fix a configfs-tsm-report unregister bug

 - With CONFIG_TSM_MEASUREMENTS joining CONFIG_TSM_REPORTS and in
   anticipation of more shared "TSM" infrastructure arriving, rename the
   maintainer entry to "TRUSTED SECURITY MODULE (TSM) INFRASTRUCTURE".

* tag 'tsm-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/devsec/tsm:
  tsm-mr: Fix init breakage after bin_attrs constification by scoping non-const pointers to init phase
  sample/tsm-mr: Fix missing static for sample_report
  virt: tdx-guest: Transition to scoped_cond_guard for mutex operations
  virt: tdx-guest: Refactor and streamline TDREPORT generation
  virt: tdx-guest: Expose TDX MRs as sysfs attributes
  x86/tdx: tdx_mcall_get_report0: Return -EBUSY on TDCALL_OPERAND_BUSY error
  x86/tdx: Add tdx_mcall_extend_rtmr() interface
  tsm-mr: Add tsm-mr sample code
  tsm-mr: Add TVM Measurement Register support
  configfs-tsm-report: Fix NULL dereference of tsm_ops
  coco/guest: Move shared guest CC infrastructure to drivers/virt/coco/guest/
  configfs-tsm: Namespace TSM report symbols

Pull thermal control updates from Rafael Wysocki:
 "These add support for a new feature, Platform Temperature Control
  (PTC), to the Intel int340x thermal driver, add support for the Airoha
  EN7581 thermal sensor and the IPQ5018 platform, fix up the ACPI
  thermal zones handling, fix other assorted issues and clean up code

  Specifics:

   - Add Platform Temperature Control (PTC) support to the Intel int340x
     thermal driver (Srinivas Pandruvada)

   - Make the Hisilicon thermal driver compile by default when ARCH_HISI
     is set (Krzysztof Kozlowski)

   - Clean up printk() format by using %pC instead of %pCn in the
     bcm2835 thermal driver (Luca Ceresoli)

   - Fix variable name coding style in the AmLogic thermal driver
     (Enrique Isidoro Vazquez Ramos)

   - Fix missing debugfs entry removal on failure by using the devm_
     variant in the LVTS thermal driver (AngeloGioacchino Del Regno)

   - Remove the unused lvts_debugfs_exit() function as the devm_ variant
     introduced before takes care of removing the debugfs entry in the
     LVTS driver (Arnd Bergmann)

   - Add the Airoha EN7581 thermal sensor support along with its DT
     bindings (Christian Marangi)

   - Add ipq5018 compatible string DT binding, cleanup and add its
     suppot to the QCom Tsens thermal driver (Sricharan Ramabadhran,
     George Moussalem)

   - Fix comments typos in the Airoha driver (Christian Marangi, Colin
     Ian King)

   - Address a sparse warning by making a local variable static in the
     QCom thermal driver (George Moussalem)

   - Fix the usage of the _SCP control method in the driver for ACPI
     thermal zones (Armin Wolf)"

* tag 'thermal-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal: qcom: ipq5018: make ops_ipq5018 struct static
  thermal/drivers/airoha: Fix spelling mistake "calibrarion" -> "calibration"
  ACPI: thermal: Execute _SCP before reading trip points
  ACPI: OSI: Stop advertising support for "3.0 _SCP Extensions"
  thermal/drivers/airoha: Fix spelling mistake
  thermal/drivers/qcom/tsens: Add support for IPQ5018 tsens
  thermal/drivers/qcom/tsens: Add support for tsens v1 without RPM
  thermal/drivers/qcom/tsens: Update conditions to strictly evaluate for IP v2+
  dt-bindings: thermal: qcom-tsens: Add ipq5018 compatible
  thermal/drivers: Add support for Airoha EN7581 thermal sensor
  dt-bindings: thermal: Add support for Airoha EN7581 thermal sensor
  thermal/drivers/mediatek/lvts: Remove unused lvts_debugfs_exit
  thermal/drivers/mediatek/lvts: Fix debugfs unregister on failure
  thermal/drivers/amlogic: Rename Uptat to uptat to follow kernel coding style
  vsprintf: remove redundant and unused %pCn format specifier
  thermal/drivers/bcm2835: Use %pC instead of %pCn
  thermal/drivers/hisi: Do not enable by default during compile testing
  thermal: int340x: processor_thermal: Platform temperature control documentation
  thermal: intel: int340x: Enable platform temperature control
  thermal: intel: int340x: Add platform temperature control interface

Pull gpio updates from Bartosz Golaszewski:
 "We have three new drivers, some refactoring in the GPIO core, lots of
  various changes across many drivers, new configfs interface for the
  virtual gpio-aggregator module and DT-bindings updates.

  The treewide conversion of GPIO drivers to using the new value setter
  callbacks is ongoing with another round of GPIO drivers updated. You
  will also see these commits coming in from other subsystems as with
  the relevant changes merged into mainline last cycle, I've started
  converting GPIO providers located elsewhere than drivers/gpio/.

  GPIO core:
   - use more lock guards where applicable
   - refactor GPIO ACPI code and shrink it in the process by 8%
   - move GPIO ACPI quirks into a separate file
   - remove unneeded #ifdef
   - convert GPIO devres helpers to using devm_add_action() where
     applicable which shrinks and simplifies the code
   - refactor GPIO descriptor validation in GPIO consumer interfaces
   - don't allow setting values on input lines in the GPIO core which
     will take off the burden from GPIO drivers of checking this down
     the line
   - provide gpiod_is_equal() as a way of safely comparing two GPIO
     descriptors (the only current user is in regulator core)

  New drivers:
   - add the GPIO module for the max77759 multifunction device
   - add the GPIO driver for the VeriSilicon BLZP1600 GPIO controller
   - add the GPIO driver for the Spacemit K1 SoC

  Driver improvements:
   - convert more drivers to using the new GPIO line value setter
     callbacks
   - convert more drivers to making the irq_chip immutable as is
     recommended by the interrupt subsystem
   - extend build testing coverage by enabling more modules to be built
     with COMPILE_TEST=y
   - extend the gpio-aggregator module with a configfs interface that
     makes the setup easier for user-space than the existing
     driver-level sysfs attributes and also adds more advanced
     configuration features (such as referring to aggregated lines by
     their original names or modifying their names as exposed by the
     aggregated chip)
   - add a missing mutex_destroy() in gpio-imx-scu
   - add an OF polarity quirk for s5m8767
   - allow building gpio-vf610 as a loadable module
   - make gpio-mxc not hardcode its GPIO base number with GPIO SYSFS
     interface disabled (another small step towards getting rid of the
     global GPIO numberspace)
   - add support for level-triggered interrupts to gpio-pca953x
   - don't double-check the ngpios property in gpio-ds4520 as GPIO core
     already does it
   - don't double-check the number of GPIOs in gpio-imx-scu as GPIO core
     already does it
   - remove unused callbacks from gpio-max3191x

  DT bindings:
   - add device-tree bindings for max77759, spacemit,k1 and blzp1600
     (new drivers added this cycle)
   - document more properties for gpio-vf610 and gpio-tegra186
   - document a new pca95xx variant
   - fix style of examples in several GPIO DT-binding documents

  Misc:
   - TODO list updates"

* tag 'gpio-updates-for-v6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (123 commits)
  gpio: timberdale: select GPIOLIB_IRQCHIP
  gpio: lpc18xx: select GPIOLIB_IRQCHIP
  gpio: grgpio: select GPIOLIB_IRQCHIP
  gpio: bcm-kona: select GPIOLIB_IRQCHIP
  dt-bindings: gpio: vf610: add ngpios and gpio-reserved-ranges
  gpio: davinci: select GPIOLIB_IRQCHIP
  gpiolib-acpi: Update file references in the Documentation and MAINTAINERS
  gpiolib: acpi: Move quirks to a separate file
  gpiolib: acpi: Add acpi_gpio_need_run_edge_events_on_boot() getter
  gpiolib: acpi: Handle deferred list via new API
  gpiolib: acpi: Make sure we fill struct acpi_gpio_info
  gpiolib: acpi: Switch to use enum in acpi_gpio_in_ignore_list()
  gpiolib: acpi: Use temporary variable for struct acpi_gpio_info
  gpiolib: remove unneeded #ifdef
  gpio: mpc8xxx: select GPIOLIB_IRQCHIP
  gpio: pxa: select GPIOLIB_IRQCHIP
  gpio: pxa: Make irq_chip immutable
  gpio: timberdale: Make irq_chip immutable
  gpio: xgene-sb: Make irq_chip immutable
  gpio: davinci: Make irq_chip immutable
  ...

Pull documentation updates from Jonathan Corbet:
 "A moderately busy cycle for documentation this time around:

   - The most significant change is the replacement of the old
     kernel-doc script (a monstrous collection of Perl regexes that
     predates the Git era) with a Python reimplementation. That, too, is
     a horrifying collection of regexes, but in a much cleaner and more
     maintainable structure that integrates far better with the Sphinx
     build system.

     This change has been in linux-next for the full 6.15 cycle; the
     small number of problems that turned up have been addressed,
     seemingly to everybody's satisfaction. The Perl kernel-doc script
     remains in tree (as scripts/kernel-doc.pl) and can be used with a
     command-line option if need be. Unless some reason to keep it
     around materializes, it will probably go away in 6.17.

     Credit goes to Mauro Carvalho Chehab for doing all this work.

   - Some RTLA documentation updates

   - A handful of Chinese translations

   - The usual collection of typo fixes, general updates, etc"

* tag 'docs-6.16' of git://git.lwn.net/linux: (85 commits)
  Docs: doc-guide: update sphinx.rst Sphinx version number
  docs: doc-guide: clarify latest theme usage
  Documentation/scheduler: Fix typo in sched-stats domain field description
  scripts: kernel-doc: prevent a KeyError when checking output
  docs: kerneldoc.py: simplify exception handling logic
  MAINTAINERS: update linux-doc entry to cover new Python scripts
  docs: align with scripts/syscall.tbl migration
  Documentation: NTB: Fix typo
  Documentation: ioctl-number: Update table intro
  docs: conf.py: drop backward support for old Sphinx versions
  Docs: driver-api/basics: add kobject_event interfaces
  Docs: relay: editing cleanups
  docs: fix "incase" typo in coresight/panic.rst
  Fix spelling error for 'parallel'
  docs: admin-guide: fix typos in reporting-issues.rst
  docs: dmaengine: add explanation for DMA_ASYNC_TX capability
  Documentation: leds: improve readibility of multicolor doc
  docs: fix typo in firmware-related section
  docs: Makefile: Inherit PYTHONPYCACHEPREFIX setting as env variable
  Documentation: ioctl-number: Update outdated submission info
  ...

Board files are deprecated by DT, and the last user of
nvmem_add_cell_table() was removed by commit 2af4fcc0d3574482 ("ARM:
davinci: remove unused board support") in v6.3.  Hence remove all
support for nvmem cell tables, and update the documentation.

Device drivers can still register a single cell using
nvmem_add_one_cell() (which was not documented before).

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://lore.kernel.org/r/20250509122452.11827-2-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>