Risc-V gained support recently.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/YN2nqOVHgGDt4Iid@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

The references to arch/c6x are obsolete now that the architecture
is gone. Remove them.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210225142841.3385428-1-arnd@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

Pull RISC-V updates from Palmer Dabbelt:
 "We have a handful of new kernel features for 5.11:

   - Support for the contiguous memory allocator.

   - Support for IRQ Time Accounting

   - Support for stack tracing

   - Support for strict /dev/mem

   - Support for kernel section protection

  I'm being a bit conservative on the cutoff for this round due to the
  timing, so this is all the new development I'm going to take for this
  cycle (even if some of it probably normally would have been OK). There
  are, however, some fixes on the list that I will likely be sending
  along either later this week or early next week.

  There is one issue in here: one of my test configurations
  (PREEMPT{,_DEBUG}=y) fails to boot on QEMU 5.0.0 (from April) as of
  the .text.init alignment patch.

  With any luck we'll sort out the issue, but given how many bugs get
  fixed all over the place and how unrelated those features seem my
  guess is that we're just running into something that's been lurking
  for a while and has already been fixed in the newer QEMU (though I
  wouldn't be surprised if it's one of these implicit assumptions we
  have in the boot flow). If it was hardware I'd be strongly inclined to
  look more closely, but given that users can upgrade their simulators
  I'm less worried about it"

* tag 'riscv-for-linus-5.11-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  arm64: Use the generic devmem_is_allowed()
  arm: Use the generic devmem_is_allowed()
  RISC-V: Use the new generic devmem_is_allowed()
  lib: Add a generic version of devmem_is_allowed()
  riscv: Fixed kernel test robot warning
  riscv: kernel: Drop unused clean rule
  riscv: provide memmove implementation
  RISC-V: Move dynamic relocation section under __init
  RISC-V: Protect all kernel sections including init early
  RISC-V: Align the .init.text section
  RISC-V: Initialize SBI early
  riscv: Enable ARCH_STACKWALK
  riscv: Make stack walk callback consistent with generic code
  riscv: Cleanup stacktrace
  riscv: Add HAVE_IRQ_TIME_ACCOUNTING
  riscv: Enable CMA support
  riscv: Ignore Image.* and loader.bin
  riscv: Clean up boot dir
  riscv: Fix compressed Image formats build
  RISC-V: Add kernel image sections to the resource tree

Pull asm-generic cross-architecture timer cleanup from Arnd Bergmann:
 "This cleans up two ancient timer features that were never completed in
  the past, CONFIG_GENERIC_CLOCKEVENTS and CONFIG_ARCH_USES_GETTIMEOFFSET.

  There was only one user left for the ARCH_USES_GETTIMEOFFSET variant
  of clocksource implementations, the ARM EBSA110 platform. Rather than
  changing to use modern timekeeping, we remove the platform entirely as
  Russell no longer uses his machine and nobody else seems to have one
  any more.

  The conditional code for using arch_gettimeoffset() is removed as a
  result.

  For CONFIG_GENERIC_CLOCKEVENTS, there are still a couple of platforms
  not using clockevent drivers: parisc, ia64, most of m68k, and one Arm
  platform. These all do timer ticks slighly differently, and this gets
  cleaned up to the point they at least all call the same helper
  function.

  Instead of most platforms using 'select GENERIC_CLOCKEVENTS' in
  Kconfig, the polarity is now reversed, with the few remaining ones
  selecting LEGACY_TIMER_TICK instead"

* tag 'asm-generic-timers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  timekeeping: default GENERIC_CLOCKEVENTS to enabled
  timekeeping: remove xtime_update
  m68k: remove timer_interrupt() function
  m68k: change remaining timers to legacy_timer_tick
  m68k: m68328: use legacy_timer_tick()
  m68k: sun3/sun3c: use legacy_timer_tick
  m68k: split heartbeat out of timer function
  m68k: coldfire: use legacy_timer_tick()
  parisc: use legacy_timer_tick
  ARM: rpc: use legacy_timer_tick
  ia64: convert to legacy_timer_tick
  timekeeping: add CONFIG_LEGACY_TIMER_TICK
  timekeeping: remove arch_gettimeoffset
  net: remove am79c961a driver
  ARM: remove ebsa110 platform

The feature lists don't match reality as of v5.10-rc4, update them
accordingly (by features-refresh.sh).

Signed-off-by: Wei Li <liwei391@huawei.com>
Link: https://lore.kernel.org/r/20201119022709.45843-1-liwei391@huawei.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

RISCV_TIMER/CLINT_TIMER is required for RISC-V system, and it
provides sched_clock, which allow us to enable IRQ_TIME_ACCOUNTING.

Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

Almost all machines use GENERIC_CLOCKEVENTS, so it feels wrong to
require each one to select that symbol manually.

Instead, enable it whenever CONFIG_LEGACY_TIMER_TICK is disabled as
a simplification. It should be possible to select both
GENERIC_CLOCKEVENTS and LEGACY_TIMER_TICK from an architecture now
and decide at runtime between the two.

For the clockevents arch-support.txt file, this means that additional
architectures are marked as TODO when they have at least one machine
that still uses LEGACY_TIMER_TICK, rather than being marked 'ok' when
at least one machine has been converted. This means that both m68k and
arm (for riscpc) revert to TODO.

At this point, we could just always enable CONFIG_GENERIC_CLOCKEVENTS
rather than leaving it off when not needed. I built an m68k
defconfig kernel (using gcc-10.1.0) and found that this would add
around 5.5KB in kernel image size:

   text	   data	    bss	    dec	    hex	filename
3861936	1092236	 196656	5150828	 4e986c	obj-m68k/vmlinux-no-clockevent
3866201	1093832	 196184	5156217	 4ead79	obj-m68k/vmlinux-clockevent

On Arm (MACH_RPC), that difference appears to be twice as large,
around 11KB on top of an 6MB vmlinux.

Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

parisc has selected CONFIG_GENERIC_CLOCKEVENTS since commit 43b1f6abd590
("parisc: Switch to generic sched_clock implementation"), but does not
appear to actually be using it, and instead calls the low-level
timekeeping functions directly.

Remove the GENERIC_CLOCKEVENTS select again, and instead convert to
the newly added legacy_timer_tick() helper.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

With Arm EBSA110 gone, nothing uses it any more, so the corresponding
code and the Kconfig option can be removed.

Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Pull documentation fixes from Jonathan Corbet:
 "A handful of obvious fixes that wandered in during the merge window"

* tag 'docs-5.9-2' of git://git.lwn.net/linux:
  Documentation/locking/locktypes: fix the typo
  doc/zh_CN: resolve undefined label warning in admin-guide index
  doc/zh_CN: fix title heading markup in admin-guide cpu-load
  docs: remove the 2.6 "Upgrading I2C Drivers" guide
  docs: Correct the release date of 5.2 stable
  mailmap: Update comments for with format and more detalis
  docs: cdrom: Fix a typo and rst markup
  Doc: admin-guide: use correct legends in kernel-parameters.txt
  Documentation/features: refresh RISC-V arch support files
  documentation: coccinelle: Improve command example for make C={1,2}
  Core-api: Documentation: Replace deprecated :c:func: Usage
  Dev-tools: Documentation: Replace deprecated :c:func: Usage
  Filesystems: Documentation: Replace deprecated :c:func: Usage
  docs: trace: fix a typo