linux-toradex.git/Documentation/hwmon, branch v2.6.27.49

hwmon: (adt7473) Fix some bogosity in documentation file

2008-10-09T13:33:58+00:00

Signed-off-by: Darrick J. Wong 
Signed-off-by: Jean Delvare

hwmon: Define sysfs interface for energy consumption register

2008-10-09T13:33:58+00:00

Describe the sysfs files that were introduced in the ibmaem driver.

Signed-off-by: Darrick J. Wong 
Signed-off-by: Jean Delvare

ibmaem: update the documentation to reflect the current name

2008-08-15T15:35:44+00:00

Minor documentation update to reflect the current full name of the power
management hardware interface and reflows the text a bit.

Signed-off-by: Darrick J. Wong 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

hwmon: (it87) Support for 16-bit fan reading in it8705 >= rev 0x03

2008-08-06T20:41:06+00:00

The it8705 chip supports 16-bit fan tachometers in revisions at least
>= 0x03 (Version G). This patch enables 16-bit fan readings on all
revisions >= 0x03 just like the it8712, it8716, and it8718 chips.

Signed-off-by: Andrew Paprocki 
Signed-off-by: Jean Delvare

hwmon: (it87) Support for 16-bit fan reading in it8712 >= rev 0x07

2008-08-06T20:41:06+00:00

The it8712 chip supports 16-bit fan tachometers in revisions >= 0x07.
Revisions >= 0x08 dropped support for 8-bit fan divisor registers. The
patch enables 16-bit fan readings on all revisions >= 0x07 just like
the it8716 and it8718 chips.

Signed-off-by: Andrew Paprocki 
Signed-off-by: Jean Delvare

hwmon: (w83627hf) Drop reset module parameter

2008-08-06T20:41:04+00:00

Drop the reset parameter of the w83627hf driver. It seems it wasn't
that useful. It was dropped from the Linux 2.4 version of this driver
back in July 2004.

The only users who have reported that they were still using this
parameter, needed it to switch the chip from automatic fan speed
control back to manual mode. Now that the driver creates pwmN_enable
sysfs files, users will be able to use these files instead, which is
way less agressive.

Signed-off-by: Jean Delvare 
Acked-by: Dominik Geyer

hwmon: (w83791d) Use fan divisor bits from vbat register

2008-08-06T20:41:04+00:00

Update w83791d with fan bits in vbat mon register (7.48 of the
datasheet). This change allows all fans to have a divisor of 128, 
and fixes a problem with incorrectly reported fan speeds. 

Signed-off-by: Marc Hulsman 
Signed-off-by: Jean Delvare

hwmon: (dme1737) Add support for the SMSC SCH5027

2008-08-06T20:41:03+00:00

Add support for the SCH5027. The differences to the DME1737 are:
- No support for programmable temp offsets
- In auto mode, PWM outputs stay on min value if temp goes below low threshold
  and can't be programmed to fully turn off
- Different voltage scaling
- No VID input

Signed-off-by: Juerg Haefliger 
Signed-off-by: Jean Delvare

hwmon: (lm85) Drop dead code

2008-08-01T03:44:03+00:00

Drop a lot of useless register defines, conversion macros, data structure
members and update code. All these register values were read from the
device but nothing is done out of them, so this is all dead code in
practice.

Signed-off-by: Jean Delvare 
Acked-by: Juerg Haefliger 
Signed-off-by: Mark M. Hoffman

hwmon: (dme1737) probe all addresses

2008-08-01T03:44:02+00:00

This patch adds a module load parameter to enable probing of
non-standard LPC addresses 0x162e and 0x164e when scanning for supported
ISA chips.

Signed-Off-By: Juerg Haefliger 
Acked-by: Jean Delvare 
Signed-off-by: Mark M. Hoffman