linux-toradex.git/Documentation/hwmon, branch v3.2.13

hwmon: (zl6100) Enable interval between chip accesses for all chips

2012-03-19T16:02:36+00:00

commit fecfb64422d91a9621a3f96ab75c3a5f13e80b58 upstream.

Intersil reports that all chips supported by the zl6100 driver require
an interval between chip accesses, even ZL2004 and ZL6105 which were thought
to be safe.

Reported-by: Vivek Gani 
Signed-off-by: Guenter Roeck 
Signed-off-by: Greg Kroah-Hartman

hwmon: (w83627ehf) Fix temp2 source for W83627UHG

2012-03-19T16:02:35+00:00

commit aacb6b0052692c72fe0cb94c6b547202def6ef46 upstream.

Properly set the source of temp2 for the W83627UHG. Also fix a
comment right before that, and document the W83627UHG as reporting up
to 3 temperatures.

Signed-off-by: Jean Delvare 
Cc: Guenter Roeck 
Signed-off-by: Guenter Roeck 
Signed-off-by: Greg Kroah-Hartman

hwmon: (jc42) Add support for AT30TS00, TS3000GB2, TSE2002GB2, and MCP9804

2012-03-12T19:31:40+00:00

commit 1bd612a25855f4cc9345052b53d7da697dba6358 upstream.

Also update IDT datasheet locations.

Signed-off-by: Guenter Roeck 
Acked-by: Jean Delvare 
Signed-off-by: Greg Kroah-Hartman

hwmon: (jc42) Add support for ST Microelectronics STTS2002 and STTS3000

2012-03-12T19:31:40+00:00

commit 4de86126a712ba83fa038d277c8282f7ed466a4b upstream.

These are fully compatible with Jedec JC 42.4 as far as I can see.

Signed-off-by: Jean Delvare 
Cc: Guenter Roeck 
Signed-off-by: Guenter Roeck 
Signed-off-by: Greg Kroah-Hartman

hwmon: (w83627ehf) Add support for the W83627UHG

2011-11-04T11:00:48+00:00

This is essentially a stripped down version of the W83627DHG. Noticeable
difference is that it is still powered with +5V, as older models, even
though the ADC resolution is 8 mV as newer models have.

Thanks to Ulf Bruman (Saab Group) for doing all the testing.

Signed-off-by: Jean Delvare 
Acked-by: Guenter Roeck

hwmon: (lm75) Document why clones are not detected

2011-10-24T18:09:47+00:00

Explain why clones of the LM75 are generally not detected by the
driver, and why this isn't going to change. Also update the
documentation to reflect the list of chip names currently supported by
the driver.

Signed-off-by: Jean Delvare 
Signed-off-by: Guenter Roeck

hwmon: (lm75) Add support for Analog Devices ADT75

2011-10-24T18:09:45+00:00

Add datasheet reference and device ID for ADT75.

The ADT75, like some other LM75 derivatives, needs to be instantiated
using methods 1, 2, or 4.
For more information see Documentation/i2c/instantiating-devices.

Signed-off-by: Michael Hennerich 
Acked-by: Jonathan Cameron 
Acked-by: Jean Delvare 
Signed-off-by: Guenter Roeck

hwmon: (pmbus) Add support for Lineage Power DC-DC converters

2011-10-24T18:09:44+00:00

Add device IDs and reference to datasheets for Lineage Power DC-DC converters.

Signed-off-by: Guenter Roeck 
Reviewed-by: Robert Coulson

hwmon: (pmbus/ltc2978) Add support for LTC3880 to LTC2978 driver

2011-10-24T18:09:43+00:00

The LTC3880 PMBus command set is comparable to LTC2978. Add support for it
to the LTC2978 driver.

Signed-off-by: Guenter Roeck 
Reviewed-by: Robert Coulson

hwmon: (pmbus/ltc2978) Explicit driver for LTC2978

2011-10-24T18:09:42+00:00

Provide explicit driver for LTC2978 to enable support for minimum and peak
attributes. Remove ltc2978 chip id from generic pmbus driver.

Signed-off-by: Guenter Roeck 
Reviewed-by: Robert Coulson