linux-toradex.git/Documentation/hwmon, branch v4.2.6

hwmon: (nct7904) Rename pwm attributes to match hwmon ABI

2015-07-30T03:06:46+00:00

pwm attributes have well defined names, which should be used.

Cc: Vadim V. Vlasov 
Cc: stable@vger.kernel.org #v4.1+
Signed-off-by: Guenter Roeck

hwmon: Document which I2C addresses can be probed

2015-07-03T12:39:05+00:00

Add an item to the checklist when submitting a new hwmon driver: only
some I2C addresses can be probed, others should not for safety
reasons.

Signed-off-by: Jean Delvare 
Reviewed-by: Guenter Roeck

hwmon: (w83792d) Additional PWM outputs support

2015-07-03T12:39:05+00:00

Add pwm[4-7] and the associated pwm[4-7]_mode attributes.

Signed-off-by: Roger Lucas 
Signed-off-by: Jean Delvare

hwmon: add driver for Microchip TC74

2015-06-22T05:54:53+00:00

Add hwmon driver for the Microchip TC74.

The TC74 is a single-input 8-bit I2C temperature sensor,
with +-2 degrees centigrade accuracy.

Signed-off-by: Maciej Szmigiero 
Signed-off-by: Guenter Roeck

hwmon: (ntc_thermistor) Add support for ncpXXwf104

2015-06-01T05:58:36+00:00

This patch adds support for the ntc thermistor NCPXXWF104 series.

Cc: Jean Delvare 
Cc: Guenter Roeck 
Signed-off-by: Beomho Seo 
Signed-off-by: Guenter Roeck

hwmon: (tmp401) Do not auto-detect chip on I2C address 0x37

2015-05-29T20:37:06+00:00

I2C address 0x37 may be used by EEPROMs, which can result in false
positives. Do not attempt to detect a chip at this address.

Reviewed-by: Jean Delvare 
Cc: stable@vger.kernel.org # v4.0+
Signed-off-by: Guenter Roeck

hwmon: (it87) Add support for IT8620E

2015-04-05T13:01:00+00:00

IT8620E is mostly compatible to IT7828F. Add generic support for it.

IT8620E supports up to 6 fan tachometers and 6 pwm controls.
Support for the 6th tachometer and for the additional pwm controls
are addded in separate patches.

Reviewed-by: Jean Delvare 
Signed-off-by: Guenter Roeck

hwmon: (it87) Add support for IT8790E

2015-04-05T13:00:59+00:00

IT8790E is a super-IO chip with three fan tachometers. It is mostly
compatible to IT8728F, but only supports three fan tachometers
instead of five.

Reviewed-by: Jean Delvare 
Signed-off-by: Guenter Roeck

hwmon: Add Nuvoton NCT7904 hwmon driver

2015-03-09T16:59:36+00:00

The NCT7904D is a hardware monitor supporting up to 20 voltage sensors,
internal temperature sensor, Intel PECI and AMD SB-TSI CPU temperature
interface, up to 12 fan tachometer inputs, up to 4 fan control channels
with SmartFan.

Signed-off-by: Vadim V. Vlasov 
[Guenter Roeck: Fixed whitespace errors, dropped redundant comment]
Signed-off-by: Guenter Roeck

hwmon: (it87) Add support for IT8786E

2015-03-09T16:59:36+00:00

IT8786E is mostly compatible with IT8771 / IT8772.
Parameters determined by testing various combinations.

Reviewed-by: Jean Delvare 
Signed-off-by: Thomas Lorblanches 
[Guenter Roeck: merged from github, addressed review comments]
Signed-off-by: Guenter Roeck