The input subsystem documentation got converted into ReST.

Add it to the main documentation index and use kernel-figure
for the two svg images there.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

Pull input subsystem updates from Dmitry Torokhov:

 - a big update from Mauro converting input documentation to ReST format

 - Synaptics PS/2 is now aware of SMBus companion devices, which means
   that we can now use native RMI4 protocol to handle touchpads, instead
   of relying on legacy PS/2 mode.

 - we removed support from BMA180 accelerometer from input devices as it
   is now handled properly by IIO

 - update to TSC2007 to corretcly report pressure

 - other miscellaneous driver fixes.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (152 commits)
  Input: ar1021_i2c - use BIT to check for a bit
  Input: twl4030-pwrbutton - use input_set_capability() helper
  Input: twl4030-pwrbutton - use correct device for irq request
  Input: ar1021_i2c - enable touch mode during open
  Input: add uinput documentation
  dt-bindings: input: add bindings document for ar1021_i2c driver
  dt-bindings: input: rotary-encoder: fix typo
  Input: xen-kbdfront - add module parameter for setting resolution
  ARM: pxa/raumfeld: fix compile error in rotary controller resources
  Input: xpad - do not suggest writing to Dominic
  Input: xpad - don't use literal blocks inside footnotes
  Input: xpad - note that usb/devices is now at /sys/kernel/debug/
  Input: docs - freshen up introduction
  Input: docs - split input docs into kernel- and user-facing
  Input: docs - note that MT-A protocol is obsolete
  Input: docs - update joystick documentation a bit
  Input: docs - remove disclaimer/GPL notice
  Input: fix "Game console" heading level in joystick documentation
  Input: rotary-encoder - remove references to platform data from docs
  Input: move documentation for Amiga CD32
  ...

Pull HID subsystem updates from Jiri Kosina:

 - The need for HID_QUIRK_NO_INIT_REPORTS per-device quirk has been
   growing dramatically during past years, so the time has come to
   switch over the default, and perform the pro-active reading only in
   cases where it's really needed (multitouch, wacom).

   The only place where this behavior is (in some form) preserved is
   hiddev so that we don't introduce userspace-visible change of
   behavior.

   From Benjamin Tissoires

 - HID++ support for power_supply / baterry reporting.

   From Benjamin Tissoires and Bastien Nocera

 - Vast improvements / rework of DS3 and DS4 in Sony driver.

   From Roderick Colenbrander

 - Improvment (in terms of getting closer to the Microsoft's
   interpretation of slightly ambiguous specification) of logical range
   interpretation in case null-state is set in the rdesc.

   From Valtteri Heikkilä and Tomasz Kramkowski

 - A lot of newly supported device IDs and small assorted fixes

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (71 commits)
  HID: usbhid: Add HID_QUIRK_NOGET for Aten CS-1758 KVM switch
  HID: asus: support backlight on USB keyboards
  HID: wacom: Move wacom_remote_irq and wacom_remote_status_irq
  HID: wacom: generic: sync pad events only for actual packets
  HID: sony: remove redundant check for -ve err
  HID: sony: Make sure to unregister sensors on failure
  HID: sony: Make DS4 bt poll interval adjustable
  HID: sony: Set proper bit flags on DS4 output report
  HID: sony: DS4 use brighter LED colors
  HID: sony: Improve navigation controller axis/button mapping
  HID: sony: Use DS3 MAC address as unique identifier on USB
  HID: logitech-hidpp: add a sysfs file to tell we support power_supply
  HID: logitech-hidpp: enable HID++ 1.0 battery reporting
  HID: logitech-hidpp: add support for battery status for the K750
  HID: logitech-hidpp: battery: provide CAPACITY_LEVEL
  HID: logitech-hidpp: rename battery level into capacity
  HID: logitech-hidpp: battery: provide ONLINE property
  HID: logitech-hidpp: notify battery on connect
  HID: logitech-hidpp: return an error if the queried feature is not present
  HID: logitech-hidpp: create the battery for all types of HID++ devices
  ...

Add description of uinput module with a few examples.

Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Do not recommend people write to Dominic, rather everyone should be using
linux-input mailing list.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Unfortunately, Sphinx (or LaTeX) can't handle literal blocks inside
footnotes. So, just use normal text for the two literal code-blocks that
documents the output of /sys/kernel/debug/usb/devices for xpad devices.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The /proc/bus/usb/devices got moved to sysfs. It is now sitting at:

        /sys/kernel/debug/usb/devices

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Stop saying that API is experimental and that only USB is supported,
acknowledge that evdev is the preferred interface, and remove paragraph
encouraging people sending snail mail to Vojtech :) along with his email.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Split input documentation into several groups: kernel- and user-facing, and
notes about individual device drivers. Move device drivers docs into a
separate subdirectory.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>