Pull PCI updates from Bjorn Helgaas:
 "Enumeration:

   - Warn if a host bridge has no NUMA info (Yunsheng Lin)

   - Add PCI_STD_NUM_BARS for the number of standard BARs (Denis
     Efremov)

  Resource management:

   - Fix boot-time Embedded Controller GPE storm caused by incorrect
     resource assignment after ACPI Bus Check Notification (Mika
     Westerberg)

   - Protect pci_reassign_bridge_resources() against concurrent
     addition/removal (Benjamin Herrenschmidt)

   - Fix bridge dma_ranges resource list cleanup (Rob Herring)

   - Add "pci=hpmmiosize" and "pci=hpmmioprefsize" parameters to control
     the MMIO and prefetchable MMIO window sizes of hotplug bridges
     independently (Nicholas Johnson)

   - Fix MMIO/MMIO_PREF window assignment that assigned more space than
     desired (Nicholas Johnson)

   - Only enforce bus numbers from bridge EA if the bridge has EA
     devices downstream (Subbaraya Sundeep)

   - Consolidate DT "dma-ranges" parsing and convert all host drivers to
     use shared parsing (Rob Herring)

  Error reporting:

   - Restore AER capability after resume (Mayurkumar Patel)

   - Add PoisonTLPBlocked AER counter (Rajat Jain)

   - Use for_each_set_bit() to simplify AER code (Andy Shevchenko)

   - Fix AER kernel-doc (Andy Shevchenko)

   - Add "pcie_ports=dpc-native" parameter to allow native use of DPC
     even if platform didn't grant control over AER (Olof Johansson)

  Hotplug:

   - Avoid returning prematurely from sysfs requests to enable or
     disable a PCIe hotplug slot (Lukas Wunner)

   - Don't disable interrupts twice when suspending hotplug ports (Mika
     Westerberg)

   - Fix deadlocks when PCIe ports are hot-removed while suspended (Mika
     Westerberg)

  Power management:

   - Remove unnecessary ASPM locking (Bjorn Helgaas)

   - Add support for disabling L1 PM Substates (Heiner Kallweit)

   - Allow re-enabling Clock PM after it has been disabled (Heiner
     Kallweit)

   - Add sysfs attributes for controlling ASPM link states (Heiner
     Kallweit)

   - Remove CONFIG_PCIEASPM_DEBUG, including "link_state" and "clk_ctl"
     sysfs files (Heiner Kallweit)

   - Avoid AMD FCH XHCI USB PME# from D0 defect that prevents wakeup on
     USB 2.0 or 1.1 connect events (Kai-Heng Feng)

   - Move power state check out of pci_msi_supported() (Bjorn Helgaas)

   - Fix incorrect MSI-X masking on resume and revert related nvme quirk
     for Kingston NVME SSD running FW E8FK11.T (Jian-Hong Pan)

   - Always return devices to D0 when thawing to fix hibernation with
     drivers like mlx4 that used legacy power management (previously we
     only did it for drivers with new power management ops) (Dexuan Cui)

   - Clear PCIe PME Status even for legacy power management (Bjorn
     Helgaas)

   - Fix PCI PM documentation errors (Bjorn Helgaas)

   - Use dev_printk() for more power management messages (Bjorn Helgaas)

   - Apply D2 delay as milliseconds, not microseconds (Bjorn Helgaas)

   - Convert xen-platform from legacy to generic power management (Bjorn
     Helgaas)

   - Removed unused .resume_early() and .suspend_late() legacy power
     management hooks (Bjorn Helgaas)

   - Rearrange power management code for clarity (Rafael J. Wysocki)

   - Decode power states more clearly ("4" or "D4" really refers to
     "D3cold") (Bjorn Helgaas)

   - Notice when reading PM Control register returns an error (~0)
     instead of interpreting it as being in D3hot (Bjorn Helgaas)

   - Add missing link delays required by the PCIe spec (Mika Westerberg)

  Virtualization:

   - Move pci_prg_resp_pasid_required() to CONFIG_PCI_PRI (Bjorn
     Helgaas)

   - Allow VFs to use PRI (the PF PRI is shared by the VFs, but the code
     previously didn't recognize that) (Kuppuswamy Sathyanarayanan)

   - Allow VFs to use PASID (the PF PASID capability is shared by the
     VFs, but the code previously didn't recognize that) (Kuppuswamy
     Sathyanarayanan)

   - Disconnect PF and VF ATS enablement, since ATS in PFs and
     associated VFs can be enabled independently (Kuppuswamy
     Sathyanarayanan)

   - Cache PRI and PASID capability offsets (Kuppuswamy Sathyanarayanan)

   - Cache the PRI PRG Response PASID Required bit (Bjorn Helgaas)

   - Consolidate ATS declarations in linux/pci-ats.h (Krzysztof
     Wilczynski)

   - Remove unused PRI and PASID stubs (Bjorn Helgaas)

   - Removed unnecessary EXPORT_SYMBOL_GPL() from ATS, PRI, and PASID
     interfaces that are only used by built-in IOMMU drivers (Bjorn
     Helgaas)

   - Hide PRI and PASID state restoration functions used only inside the
     PCI core (Bjorn Helgaas)

   - Add a DMA alias quirk for the Intel VCA NTB (Slawomir Pawlowski)

   - Serialize sysfs sriov_numvfs reads vs writes (Pierre Crégut)

   - Update Cavium ACS quirk for ThunderX2 and ThunderX3 (George
     Cherian)

   - Fix the UPDCR register address in the Intel ACS quirk (Steffen
     Liebergeld)

   - Unify ACS quirk implementations (Bjorn Helgaas)

  Amlogic Meson host bridge driver:

   - Fix meson PERST# GPIO polarity problem (Remi Pommarel)

   - Add DT bindings for Amlogic Meson G12A (Neil Armstrong)

   - Fix meson clock names to match DT bindings (Neil Armstrong)

   - Add meson support for Amlogic G12A SoC with separate shared PHY
     (Neil Armstrong)

   - Add meson extended PCIe PHY functions for Amlogic G12A USB3+PCIe
     combo PHY (Neil Armstrong)

   - Add arm64 DT for Amlogic G12A PCIe controller node (Neil Armstrong)

   - Add commented-out description of VIM3 USB3/PCIe mux in arm64 DT
     (Neil Armstrong)

  Broadcom iProc host bridge driver:

   - Invalidate iProc PAXB address mapping before programming it
     (Abhishek Shah)

   - Fix iproc-msi and mvebu __iomem annotations (Ben Dooks)

  Cadence host bridge driver:

   - Refactor Cadence PCIe host controller to use as a library for both
     host and endpoint (Tom Joseph)

  Freescale Layerscape host bridge driver:

   - Add layerscape LS1028a support (Xiaowei Bao)

  Intel VMD host bridge driver:

   - Add VMD bus 224-255 restriction decode (Jon Derrick)

   - Add VMD 8086:9A0B device ID (Jon Derrick)

   - Remove Keith from VMD maintainer list (Keith Busch)

  Marvell ARMADA 3700 / Aardvark host bridge driver:

   - Use LTSSM state to build link training flag since Aardvark doesn't
     implement the Link Training bit (Remi Pommarel)

   - Delay before training Aardvark link in case PERST# was asserted
     before the driver probe (Remi Pommarel)

   - Fix Aardvark issues with Root Control reads and writes (Remi
     Pommarel)

   - Don't rely on jiffies in Aardvark config access path since
     interrupts may be disabled (Remi Pommarel)

   - Fix Aardvark big-endian support (Grzegorz Jaszczyk)

  Marvell ARMADA 370 / XP host bridge driver:

   - Make mvebu_pci_bridge_emul_ops static (Ben Dooks)

  Microsoft Hyper-V host bridge driver:

   - Add hibernation support for Hyper-V virtual PCI devices (Dexuan
     Cui)

   - Track Hyper-V pci_protocol_version per-hbus, not globally (Dexuan
     Cui)

   - Avoid kmemleak false positive on hv hbus buffer (Dexuan Cui)

  Mobiveil host bridge driver:

   - Change mobiveil csr_read()/write() function names that conflict
     with riscv arch functions (Kefeng Wang)

  NVIDIA Tegra host bridge driver:

   - Fix Tegra CLKREQ dependency programming (Vidya Sagar)

  Renesas R-Car host bridge driver:

   - Remove unnecessary header include from rcar (Andrew Murray)

   - Tighten register index checking for rcar inbound range programming
     (Marek Vasut)

   - Fix rcar inbound range alignment calculation to improve packing of
     multiple entries (Marek Vasut)

   - Update rcar MACCTLR setting to match documentation (Yoshihiro
     Shimoda)

   - Clear bit 0 of MACCTLR before PCIETCTLR.CFINIT per manual
     (Yoshihiro Shimoda)

   - Add Marek Vasut and Yoshihiro Shimoda as R-Car maintainers (Simon
     Horman)

  Rockchip host bridge driver:

   - Make rockchip 0V9 and 1V8 power regulators non-optional (Robin
     Murphy)

  Socionext UniPhier host bridge driver:

   - Set uniphier to host (RC) mode always (Kunihiko Hayashi)

  Endpoint drivers:

   - Fix endpoint driver sign extension problem when shifting page
     number to phys_addr_t (Alan Mikhak)

  Misc:

   - Add NumaChip SPDX header (Krzysztof Wilczynski)

   - Replace EXTRA_CFLAGS with ccflags-y (Krzysztof Wilczynski)

   - Remove unused includes (Krzysztof Wilczynski)

   - Removed unused sysfs attribute groups (Ben Dooks)

   - Remove PTM and ASPM dependencies on PCIEPORTBUS (Bjorn Helgaas)

   - Add PCIe Link Control 2 register field definitions to replace magic
     numbers in AMDGPU and Radeon CIK/SI (Bjorn Helgaas)

   - Fix incorrect Link Control 2 Transmit Margin usage in AMDGPU and
     Radeon CIK/SI PCIe Gen3 link training (Bjorn Helgaas)

   - Use pcie_capability_read_word() instead of pci_read_config_word()
     in AMDGPU and Radeon CIK/SI (Frederick Lawler)

   - Remove unused pci_irq_get_node() Greg Kroah-Hartman)

   - Make asm/msi.h mandatory and simplify PCI_MSI_IRQ_DOMAIN Kconfig
     (Palmer Dabbelt, Michal Simek)

   - Read all 64 bits of Switchtec part_event_bitmap (Logan Gunthorpe)

   - Fix erroneous intel-iommu dependency on CONFIG_AMD_IOMMU (Bjorn
     Helgaas)

   - Fix bridge emulation big-endian support (Grzegorz Jaszczyk)

   - Fix dwc find_next_bit() usage (Niklas Cassel)

   - Fix pcitest.c fd leak (Hewenliang)

   - Fix typos and comments (Bjorn Helgaas)

   - Fix Kconfig whitespace errors (Krzysztof Kozlowski)"

* tag 'pci-v5.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (160 commits)
  PCI: Remove PCI_MSI_IRQ_DOMAIN architecture whitelist
  asm-generic: Make msi.h a mandatory include/asm header
  Revert "nvme: Add quirk for Kingston NVME SSD running FW E8FK11.T"
  PCI/MSI: Fix incorrect MSI-X masking on resume
  PCI/MSI: Move power state check out of pci_msi_supported()
  PCI/MSI: Remove unused pci_irq_get_node()
  PCI: hv: Avoid a kmemleak false positive caused by the hbus buffer
  PCI: hv: Change pci_protocol_version to per-hbus
  PCI: hv: Add hibernation support
  PCI: hv: Reorganize the code in preparation of hibernation
  MAINTAINERS: Remove Keith from VMD maintainer
  PCI/ASPM: Remove PCIEASPM_DEBUG Kconfig option and related code
  PCI/ASPM: Add sysfs attributes for controlling ASPM link states
  PCI: Fix indentation
  drm/radeon: Prefer pcie_capability_read_word()
  drm/radeon: Replace numbers with PCI_EXP_LNKCTL2 definitions
  drm/radeon: Correct Transmit Margin masks
  drm/amdgpu: Prefer pcie_capability_read_word()
  PCI: uniphier: Set mode register to host mode
  drm/amdgpu: Replace numbers with PCI_EXP_LNKCTL2 definitions
  ...

The struct pci_driver.suspend_late() hook is one of the legacy PCI power
management callbacks, and there are no remaining users of it.  Remove it.

Link: https://lore.kernel.org/r/20191101204558.210235-7-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

The struct pci_driver.resume_early() hook is one of the legacy PCI power
management callbacks, and there are no remaining users of it.  Remove it.

Link: https://lore.kernel.org/r/20191101204558.210235-6-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Documentation/power/pci.rst is wrapped to fit in 80 columns, but directory
structure changes made a few lines longer.  Wrap them so they all fit in 80
columns again.

Link: https://lore.kernel.org/r/20191014230016.240912-7-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Per PCIe r5.0 sec 7.5.2.1, PME may be generated from D0, so update
Documentation/power/pci.rst to reflect that.

Link: https://lore.kernel.org/r/20191016194450.68959-1-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

According to the documentation, pci_pm_thaw_noirq() did not put the device
into the full-power state and restore its standard configuration registers.
This is incorrect, so update the documentation to match the code.

Link: https://lore.kernel.org/r/20191014230016.240912-3-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Wrap to 80 columns.  No textual change except to correct some "it's" that
should be "its".

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

* pm-opp:
  PM / OPP: Correct Documentation about library location
  opp: of: Support multiple suspend OPPs defined in DT
  dt-bindings: opp: Support multiple opp-suspend properties
  opp: core: add regulators enable and disable
  opp: Don't decrement uninitialized list_kref

* pm-qos:
  PM: QoS: Get rid of unused flags

* acpi-pm:
  ACPI: PM: Print debug messages on device power state changes

* pm-domains:
  PM / Domains: Verify PM domain type in dev_pm_genpd_set_performance_state()
  PM / Domains: Simplify genpd_lookup_dev()
  PM / Domains: Align in-parameter names for some genpd functions

* pm-tools:
  pm-graph: make setVal unbuffered again for python2 and python3
  cpupower: update German translation
  tools/power/cpupower: fix 64bit detection when cross-compiling
  cpupower: Add missing newline at end of file
  pm-graph v5.5

Pull operating performance points (OPP) framework changes for 5.4
from Viresh Kumar:

"This contains:

- OPP core fixes to better support genpd devices (Viresh Kumar).
- OPP core changes to support multiple suspend-opps in DT (Anson Huang).
- New OPP API (dev_pm_opp_find_level_exact()) and Qcom OPP binding
  changes for CPR (Niklas Cassel).
- Qcom minor update (Sricharan R).
- OPP Documentation fix (Yue Hu).
- OPP core support to enable/disable regulators (k.konieczny)."

* 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
  dt-bindings: opp: Add qcom-opp bindings with properties needed for CPR
  dt-bindings: opp: qcom-nvmem: Support pstates provided by a power domain
  dt-bindings: opp: qcom-nvmem: Make speedbin related properties optional
  dt-bindings: opp: Re-organise kryo cpufreq to use it for other nvmem based qcom socs
  PM / OPP: Correct Documentation about library location
  opp: of: Support multiple suspend OPPs defined in DT
  dt-bindings: opp: Support multiple opp-suspend properties
  opp: core: add regulators enable and disable
  opp: Don't decrement uninitialized list_kref
  opp: Add dev_pm_opp_find_level_exact()
  opp: Return genpd virtual devices from dev_pm_opp_attach_genpd()
  opp: Not all power-domains are scalable

The network_latency and network_throughput flags for PM-QoS have not
found much use in drivers or in userspace since they were introduced.

Commit 4a733ef1bea7 ("mac80211: remove PM-QoS listener") removed the
only user PM_QOS_NETWORK_LATENCY in the kernel a while ago and there
don't seem to be any userspace tools using the character device files
either.

PM_QOS_MEMORY_BANDWIDTH was never even added to the trace events.

Remove all the flags except cpu_dma_latency.

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>