The function hrtimer_init() doesn't exist anymore. It was replaced by
hrtimer_setup().

Thus, rename the hrtimer_init trace event to hrtimer_setup to keep it
consistent.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/all/cba84c3d853c5258aa3a262363a6eac08e2c7afc.1738746927.git.namcao@linutronix.de

Pull ring-buffer updates from Steven Rostedt:
 "Persistent buffer cleanups and simplifications.

  It was mistaken that the physical memory returned from "reserve_mem"
  had to be vmap()'d to get to it from a virtual address. But
  reserve_mem already maps the memory to the virtual address of the
  kernel so a simple phys_to_virt() can be used to get to the virtual
  address from the physical memory returned by "reserve_mem". With this
  new found knowledge, the code can be cleaned up and simplified.

   - Enforce that the persistent memory is page aligned

     As the buffers using the persistent memory are all going to be
     mapped via pages, make sure that the memory given to the tracing
     infrastructure is page aligned. If it is not, it will print a
     warning and fail to map the buffer.

   - Use phys_to_virt() to get the virtual address from reserve_mem

     Instead of calling vmap() on the physical memory returned from
     "reserve_mem", use phys_to_virt() instead.

     As the memory returned by "memmap" or any other means where a
     physical address is given to the tracing infrastructure, it still
     needs to be vmap(). Since this memory can never be returned back to
     the buddy allocator nor should it ever be memmory mapped to user
     space, flag this buffer and up the ref count. The ref count will
     keep it from ever being freed, and the flag will prevent it from
     ever being memory mapped to user space.

   - Use vmap_page_range() for memmap virtual address mapping

     For the memmap buffer, instead of allocating an array of struct
     pages, assigning them to the contiguous phsycial memory and then
     passing that to vmap(), use vmap_page_range() instead

   - Replace flush_dcache_folio() with flush_kernel_vmap_range()

     Instead of calling virt_to_folio() and passing that to
     flush_dcache_folio(), just call flush_kernel_vmap_range() directly.
     This also fixes a bug where if a subbuffer was bigger than
     PAGE_SIZE only the PAGE_SIZE portion would be flushed"

* tag 'trace-ringbuffer-v6.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  ring-buffer: Use flush_kernel_vmap_range() over flush_dcache_folio()
  tracing: Use vmap_page_range() to map memmap ring buffer
  tracing: Have reserve_mem use phys_to_virt() and separate from memmap buffer
  tracing: Enforce the persistent ring buffer to be page aligned

Enforce that the address and the size of the memory used by the persistent
ring buffer is page aligned. Also update the documentation to reflect this
requirement.

Link: https://lore.kernel.org/all/CAHk-=whUOfVucfJRt7E0AH+GV41ELmS4wJqxHDnui6Giddfkzw@mail.gmail.com/

Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Vincent Donnefort <vdonnefort@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/20250402144953.412882844@goodmis.org
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Pull char / misc / IIO driver updates from Greg KH:
 "Here is the big set of char, misc, iio, and other smaller driver
  subsystems for 6.15-rc1. Lots of stuff in here, including:

   - loads of IIO changes and driver updates

   - counter driver updates

   - w1 driver updates

   - faux conversions for some drivers that were abusing the platform
     bus interface

   - coresight driver updates

   - rust miscdevice binding updates based on real-world-use

   - other minor driver updates

  All of these have been in linux-next with no reported issues for quite
  a while"

* tag 'char-misc-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (292 commits)
  samples: rust_misc_device: fix markup in top-level docs
  Coresight: Fix a NULL vs IS_ERR() bug in probe
  misc: lis3lv02d: convert to use faux_device
  tlclk: convert to use faux_device
  regulator: dummy: convert to use the faux device interface
  bus: mhi: host: Fix race between unprepare and queue_buf
  coresight: configfs: Constify struct config_item_type
  doc: iio: ad7380: describe offload support
  iio: ad7380: add support for SPI offload
  iio: light: Add check for array bounds in veml6075_read_int_time_ms
  iio: adc: ti-ads7924 Drop unnecessary function parameters
  staging: iio: ad9834: Use devm_regulator_get_enable()
  staging: iio: ad9832: Use devm_regulator_get_enable()
  iio: gyro: bmg160_spi: add of_match_table
  dt-bindings: iio: adc: Add i.MX94 and i.MX95 support
  iio: adc: ad7768-1: remove unnecessary locking
  Documentation: ABI: add wideband filter type to sysfs-bus-iio
  iio: adc: ad7768-1: set MOSI idle state to prevent accidental reset
  iio: adc: ad7768-1: Fix conversion result sign
  iio: adc: ad7124: Benefit of dev = indio_dev->dev.parent in ad7124_parse_channel_config()
  ...

Pull tracing documentation fix from Steven Rostedt:
 "Documentation fix for runtime verifier

  The runtime verifier documents that were created were not referenced
  in the indices, which caused warning when building the documentation
  tree. Those documents are now added to the rv indices"

* tag 'trace-latency-v6.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  Documentation/rv: Add sched pages to the indices

Pull latency tracing updates from Steven Rostedt:

 - Add some trace events to osnoise and timerlat sample generation

   This adds more information to the osnoise and timerlat tracers as
   well as allows BPF programs to be attached to these locations to
   extract even more data.

 - Fix to DECLARE_TRACE_CONDITION() macro

   It wasn't used but now will be and it happened to be broken causing
   the build to fail.

 - Add scheduler specification monitors to runtime verifier (RV)

   This is a continuation of Daniel Bristot's work.

   RV allows monitors to run and react concurrently. Running the
   cumulative model is equivalent to running single components using the
   same reactors, with the advantage that it's easier to point out which
   specification failed in case of error.

   This update introduces nested monitors to RV, in short, the sysfs
   monitor folder will contain a monitor named sched, which is nothing
   but an empty container for other monitors. Controlling the sched
   monitor (enable, disable, set reactors) controls all nested monitors.

   The following scheduling monitors are added:

     - sco: scheduling context operations
       Monitor to ensure sched_set_state happens only in thread context

     - tss: task switch while scheduling
       Monitor to ensure sched_switch happens only in scheduling context

     - snroc: set non runnable on its own context
       Monitor to ensure set_state happens only in the respective task's context

     - scpd: schedule called with preemption disabled
       Monitor to ensure schedule is called with preemption disabled

     - snep: schedule does not enable preempt
       Monitor to ensure schedule does not enable preempt

     - sncid: schedule not called with interrupt disabled
       Monitor to ensure schedule is not called with interrupt disabled

* tag 'trace-latency-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tools/rv: Allow rv list to filter for container
  Documentation/rv: Add docs for the sched monitors
  verification/dot2k: Add support for nested monitors
  tools/rv: Add support for nested monitors
  rv: Add scpd, snep and sncid per-cpu monitors
  rv: Add snroc per-task monitor
  rv: Add sco and tss per-cpu monitors
  rv: Add option for nested monitors and include sched
  sched: Add sched tracepoints for RV task model
  rv: Add license identifiers to monitor files
  tracing: Fix DECLARE_TRACE_CONDITION
  trace/osnoise: Add trace events for samples

The pages Documentation/tools/rv/rv-mon-sched.rst and
Documentation/trace/rv/monitor_sched.rst were introduced but not
included in any index.

Add them to the respective indices.

Cc: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/20250327081240.46422-1-gmonaco@redhat.com
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 03abeaa63c08 ("Documentation/rv: Add docs for the sched monitors")
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Add man page and kernel documentation for the sched monitors, as sched
is a container of other monitors, document all in the same page.
sched is the first nested monitor, also explain what is a nested monitor
and how enabling containers or children monitors work.

To: Ingo Molnar <mingo@redhat.com>
To: Peter Zijlstra <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: John Kacur <jkacur@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Link: https://lore.kernel.org/20250305140406.350227-9-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Previously the sink had to be specified, but now it auto selects one by
default. Including a sink in the examples causes issues when copy
pasting the command because it might not work if that sink isn't
present. Remove the sink from all the basic examples and create a new
section specifically about overriding the default one.

Make the text a but more concise now that it's in the advanced section,
and similarly for removing the old kernel advice.

Signed-off-by: James Clark <james.clark@linaro.org>
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20241210144933.295798-1-james.clark@linaro.org

Add documentation on using coresight during panic
and watchdog.

Signed-off-by: Linu Cherian <lcherian@marvell.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250212114918.548431-9-lcherian@marvell.com