linux-toradex.git/Documentation/video4linux/CARDLIST.cx88, branch v2.6.27.57 Linux kernel for Apalis and Colibri modules V4L/DVB (7990): Fix entry for PowerColor RA 330 and make it run with firmware version 2.7 2008-06-05T09:35:56+00:00 Daniel Gimpelevich daniel@gimpelevich.san-francisco.ca.us 2008-06-04T00:29:45+00:00 a9606ce697ed719071fcccee8591ff033fa5e16d Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> 
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
V4L/DVB (7448): Add support for Kworld ATSC 120 2008-04-24T17:07:55+00:00 Mauro Carvalho Chehab mchehab@infradead.org 2008-03-28T02:18:30+00:00 99e09eac25f752b25f65392da7bd747b77040fea This board has a s5h1409 demod, plus a xc30x8 tuner (probably, xc3018). This patch adds proper support for radio, video, s-video, composite and ATSC. However, support for radio and video depends on having s5h1409 i2c gate open, otherwise, xc30x8 chip won't be visible. For a better support, some rework is needed on cx88 driver, to allow adding xc30x8 to i2c bus without sending i2c 0 byte reading to 0xc2 address. Thanks to Vanessa Ezekowitz <vanessaezekowitz@gmail.com> for helping to figure out the proper parameters for s5h1409 and the GPIO pins used by each configuration. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> 
This board has a s5h1409 demod, plus a xc30x8 tuner (probably, xc3018).

This patch adds proper support for radio, video, s-video, composite and ATSC.
However, support for radio and video depends on having s5h1409 i2c gate open,
otherwise, xc30x8 chip won't be visible.

For a better support, some rework is needed on cx88 driver, to allow adding
xc30x8 to i2c bus without sending i2c 0 byte reading to 0xc2 address.

Thanks to Vanessa Ezekowitz <vanessaezekowitz@gmail.com> for helping to figure
out the proper parameters for s5h1409 and the GPIO pins used by each
configuration.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
V4L/DVB (7370): Add basic support for Prolink Pixelview MPEG 8000GT 2008-04-24T17:07:51+00:00 Mauro Carvalho Chehab mchehab@infradead.org 2008-04-22T17:46:00+00:00 2422a9b3f47c75d3915e6af78ebe25b7d2540262 TV reception ok. S-video and Composite not tested. Audio not tested. IR not implemented yet. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> 
TV reception ok. S-video and Composite not tested. Audio not tested.
IR not implemented yet.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
V4L/DVB (7288): cx88: fix GPIO for FusionHDTV 7 Gold input selection 2008-04-24T17:07:46+00:00 Michael Krufky mkrufky@linuxtv.org 2008-04-22T17:45:35+00:00 76464d412a5a51633881078d4109212e4463e8d4 Fix GPIO for FusionHDTV 7 Gold tv / s-video / composite input selection. Fix card textual name to match other FusionHDTV device names. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> 
Fix GPIO for FusionHDTV 7 Gold tv / s-video / composite input selection.
Fix card textual name to match other FusionHDTV device names.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
V4L/DVB (7287): cx88: add analog support for DVICO FusionHDTV7 Gold 2008-04-24T17:07:46+00:00 Steven Toth stoth@hauppauge.com 2008-04-22T17:45:34+00:00 1117d6ba1313b8821b10403de114c38764008c45 Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> 
Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
V4L/DVB (7258): Support DVB-T tuning on the DViCO FusionHDTV DVB-T Pro 2008-04-24T17:07:45+00:00 Chris Pascoe c.pascoe@itee.uq.edu.au 2008-04-22T17:45:15+00:00 b3fb91d20ca111316854a166ff88b0c8c0f2388b Add support for tuning DVB-T channels on DViCO's FusionHDTV DVB-T Pro board. The IR remote and analog tuner are not supported at this time. Some changes made by Mauro Chehab to allow merging it with some other xc3028 patches. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> 
Add support for tuning DVB-T channels on DViCO's FusionHDTV DVB-T Pro board.

The IR remote and analog tuner are not supported at this time.

Some changes made by Mauro Chehab to allow merging it with some other xc3028
patches.

Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
V4L/DVB (7257): cx88: Add xc2028/3028 boards 2008-04-24T17:07:45+00:00 Mauro Carvalho Chehab mchehab@infradead.org 2008-04-22T17:45:15+00:00 9507901ef329b2dd3417372c7c9b2abcfd5c1885 This patch ports a patch from Markus Rechberger to work with tuner-xc2028. It adds entries for several cx88 boards with xc2038/3028 tuners. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> 
This patch ports a patch from Markus Rechberger to work with tuner-xc2028.
It adds entries for several cx88 boards with xc2038/3028 tuners.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
V4L/DVB (7254): cx88: fix FusionHDTV 5 PCI nano name and enable IR support 2008-04-24T17:07:44+00:00 Michael Krufky mkrufky@linuxtv.org 2008-04-22T17:45:14+00:00 8efd2e28265ca031072d8d94cdbdd53904ce9b2d load ir-kbd-i2c for IR remote control support on DViCO FusionHDTV 5 PCI nano Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> 
load ir-kbd-i2c for IR remote control support on DViCO FusionHDTV 5 PCI nano

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
V4L/DVB (7252): cx88: Add support for the Dvico PCI Nano 2008-04-24T17:07:44+00:00 Steven Toth stoth@hauppauge.com 2008-04-22T17:45:14+00:00 5c00fac0bab95a378e60c1a67e3d3c5ac44df412 ATSC is known to work. SVideo / Composite should work (I have no cable to test). Analog tuner support does not work. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> 
ATSC is known to work.
SVideo / Composite should work (I have no cable to test).
Analog tuner support does not work.

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
V4L/DVB (7043): New card supported(partially): Pinnacle 800i 2008-01-25T21:05:06+00:00 Steven Toth stoth@hauppauge.com 2008-01-05T19:53:01+00:00 60464da8b1ed8d7c19563f58cadb0ca990448a36 From Zhang: This patch continues the support for the Pinnacle HD 800i. Patch committed as-is, cleanups to follow ... Steve Signed-off-by: Chaogui Zhang <czhang1974@gmail.com> Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> 
From Zhang: This patch continues the support for the Pinnacle HD 800i.

Patch committed as-is, cleanups to follow ... Steve

Signed-off-by: Chaogui Zhang <czhang1974@gmail.com>
Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>