linux-toradex.git/Documentation/video4linux, branch v2.6.32-rc3

Documentation/: fix warnings from -Wmissing-prototypes in HOSTCFLAGS

2009-09-23T14:39:28+00:00

Fix up -Wmissing-prototypes in compileable userspace code, mainly under
Documentation/.

Signed-off-by: Ladinu Chandrasinghe 
Signed-off-by: Trevor Keith 
Cc: Sam Ravnborg 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

V4L/DVB (13014): Add support for Compro VideoMate E800 (DVB-T part only)

2009-09-19T03:53:06+00:00

Adding Compro VideoMate E800 (DVB-T part only)

Cc: Steven Toth 
Signed-off-by: Vladimir Geroy 
Signed-off-by: Douglas Schilling Landgraf 
Signed-off-by: Mauro Carvalho Chehab

V4L/DVB (13002): Adds support for Zolid Hybrid PCI card:

2009-09-19T03:52:12+00:00

http://linuxtv.org/wiki/index.php/Zolid_Hybrid_TV_Tuner

test status analog (PAL-B):
- Sometimes picture is noisy, but it becomes crystal clear after
  switching between channels. (happens for example at 687.25 Mhz)
- On a lower frequency (511.25 Mhz) the picture is always sharp, but
  lacks colour.
- No sound problems.
- radio untested.

Digital:
- DVB-T/H stream reception works.
- Would expect to see some more channels in the higher frequency region.

Overall is the impression that sensitivity still needs improvement
both in analog and digital modes.

Signed-off-by: Henk Vergonet 
Signed-off-by: Mauro Carvalho Chehab

V4L/DVB (12725): v4l: warn when desired devnodenr is in use & add _no_warn function

2009-09-19T03:19:34+00:00

Warn when the desired device node number is already in use, except when
the new video_register_device_no_warn function is called since in some
use-cases that warning is not relevant.

Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab

V4L/DVB (12722): v4l2-dev: replace 'kernel number' by 'device node number'.

2009-09-19T03:19:27+00:00

The term 'kernel number' is very vague, so replace it with the somewhat more
descriptive term 'device node number'.

In one place the local variable 'nr' was used to create the device node number
of the new device name. This has been replaced with the vdev->num field to
more clearly mark this as being the device node number and not the minor
number.

Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab

V4L/DVB (12541): v4l: remove video_register_device_index

2009-09-19T03:19:26+00:00

video_register_device_index is never actually called, instead the
stream index number is always calculated automatically.

This patch removes this function and simplifies the internal get_index
function since that can now always just return the first free index.

Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab

V4L/DVB (12540): v4l: simplify v4l2_i2c_new_subdev and friends

2009-09-19T03:19:24+00:00

Rewrite v4l2_i2c_new_subdev as a simplified version of v4l2_i2c_new_subdev_cfg
and remove v4l2_i2c_new_probed_subdev and v4l2_i2c_new_probed_subdev_addr.

This simplifies this API substantially.

Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab

V4L/DVB (12534): soc-camera: V4L2 API compliant scaling (S_FMT) and cropping (S_CROP)

2009-09-19T03:19:17+00:00

The initial soc-camera scaling and cropping implementation turned out to be
incompliant with the V4L2 API, e.g., it expected the user to specify cropping
in output window pixels, instead of input window pixels. This patch converts
the soc-camera core and all drivers to comply with the standard.

Signed-off-by: Guennadi Liakhovetski 
Signed-off-by: Mauro Carvalho Chehab

V4L/DVB (12964): tuner-core: add support for NXP TDA18271 without TDA829X demod

2009-09-19T03:16:01+00:00

Add support for NXP TDA18271 as a standalone tuner, allowing the use of
analog demodulators other than the Philips/NXP TDA829x.

Signed-off-by: Michael Krufky 
Signed-off-by: Mauro Carvalho Chehab

V4L/DVB (12954): gspca - gl860: Addition of GL860 based webcams

2009-09-19T03:15:36+00:00

- add the Genesys Logic 05e3:0503 and 05e3:f191 webcam

Signed-off-by: Olivier Lorin 
Signed-off-by: Jean-Francois Moine 
Signed-off-by: Mauro Carvalho Chehab