linux-toradex.git/Documentation, branch v4.1-rc4 Linux kernel for Apalis and Colibri modules Merge tag 'for-linus-20150516' of git://git.infradead.org/linux-mtd 2015-05-18T17:01:54+00:00 Linus Torvalds torvalds@linux-foundation.org 2015-05-18T17:01:54+00:00 7cf7d424c309457b21318b05963ff3fd723d5bcd Pull MTD fixes from Brian Norris: "Two MTD fixes for 4.1: - readtest: the signal-handling code was clobbering the error codes we should be handling/reporting in this test, rendering it useless. Noticed by Coverity. - the common SPI NOR flash DT binding (merged for 4.1-rc1) is being revised, so let's change that before 4.1 is minted" * tag 'for-linus-20150516' of git://git.infradead.org/linux-mtd: Documentation: dt: mtd: replace "nor-jedec" binding with "jedec, spi-nor" mtd: readtest: don't clobber error reports 
Pull MTD fixes from Brian Norris:
 "Two MTD fixes for 4.1:

   - readtest: the signal-handling code was clobbering the error codes
     we should be handling/reporting in this test, rendering it useless.
     Noticed by Coverity.

   - the common SPI NOR flash DT binding (merged for 4.1-rc1) is being
     revised, so let's change that before 4.1 is minted"

* tag 'for-linus-20150516' of git://git.infradead.org/linux-mtd:
  Documentation: dt: mtd: replace "nor-jedec" binding with "jedec, spi-nor"
  mtd: readtest: don't clobber error reports
Merge tag 'tty-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty 2015-05-17T04:10:05+00:00 Linus Torvalds torvalds@linux-foundation.org 2015-05-17T04:10:05+00:00 dd8edd7e97bdc5d4b96e9f13c2fab3fdc6c9ca1f Pull tty/serial fixes from Greg KH: "Here's some TTY and serial driver fixes for reported issues. All of these have been in linux-next successfully" * tag 'tty-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: pty: Fix input race when closing tty/n_gsm.c: fix a memory leak when gsmtty is removed Revert "serial/amba-pl011: Leave the TX IRQ alone when the UART is not open" serial: omap: Fix error handling in probe earlycon: Revert log warnings 
Pull tty/serial fixes from Greg KH:
 "Here's some TTY and serial driver fixes for reported issues.

  All of these have been in linux-next successfully"

* tag 'tty-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  pty: Fix input race when closing
  tty/n_gsm.c: fix a memory leak when gsmtty is removed
  Revert "serial/amba-pl011: Leave the TX IRQ alone when the UART is not open"
  serial: omap: Fix error handling in probe
  earlycon: Revert log warnings
Documentation: dt: mtd: replace "nor-jedec" binding with "jedec, spi-nor" 2015-05-15T20:04:00+00:00 Brian Norris computersforpeace@gmail.com 2015-05-14T17:32:53+00:00 8947e396a8296c5297928b60043f35dfa56baa05 In commit 8ff16cf77ce3 ("Documentation: devicetree: m25p80: add "nor-jedec" binding"), we added a generic "nor-jedec" binding to catch all mostly-compatible SPI NOR flash which can be detected via the READ ID opcode (0x9F). This was discussed and reviewed at the time, however objections have come up since then as part of this discussion: http://lkml.kernel.org/g/20150511224646.GJ32500@ld-irv-0074 It seems the parties involved agree that "jedec,spi-nor" does a better job of capturing the fact that this is SPI-specific, not just any NOR flash. This binding was only merged for v4.1-rc1, so it's still OK to change the naming. At the same time, let's move the documentation to a better name. Next up: stop referring to code (drivers/mtd/devices/m25p80.c) from the documentation. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Cc: Marek Vasut <marex@denx.de> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: devicetree@vger.kernel.org Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Mark Rutland <mark.rutland@arm.com> 
In commit 8ff16cf77ce3 ("Documentation: devicetree: m25p80: add "nor-jedec"
binding"), we added a generic "nor-jedec" binding to catch all
mostly-compatible SPI NOR flash which can be detected via the READ ID
opcode (0x9F). This was discussed and reviewed at the time, however
objections have come up since then as part of this discussion:

  http://lkml.kernel.org/g/20150511224646.GJ32500@ld-irv-0074

It seems the parties involved agree that "jedec,spi-nor" does a better
job of capturing the fact that this is SPI-specific, not just any NOR
flash.

This binding was only merged for v4.1-rc1, so it's still OK to change
the naming.

At the same time, let's move the documentation to a better name.

Next up: stop referring to code (drivers/mtd/devices/m25p80.c) from the
documentation.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Rafał Miłecki <zajec5@gmail.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: devicetree@vger.kernel.org
Acked-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Mark Rutland <mark.rutland@arm.com>
pty: Fix input race when closing 2015-05-10T17:26:37+00:00 Peter Hurley peter@hurleysoftware.com 2015-04-13T17:24:34+00:00 1a48632ffed61352a7810ce089dc5a8bcd505a60 A read() from a pty master may mistakenly indicate EOF (errno == -EIO) after the pty slave has closed, even though input data remains to be read. For example, pty slave | input worker | pty master | | | | n_tty_read() pty_write() | | input avail? no add data | | sleep schedule worker --->| | . |---> flush_to_ldisc() | . pty_close() | fill read buffer | . wait for worker | wakeup reader --->| . | read buffer full? |---> input avail ? yes |<--- yes - exit worker | copy 4096 bytes to user TTY_OTHER_CLOSED <---| |<--- kick worker | | **** New read() before worker starts **** | | n_tty_read() | | input avail? no | | TTY_OTHER_CLOSED? yes | | return -EIO Several conditions are required to trigger this race: 1. the ldisc read buffer must become full so the input worker exits 2. the read() count parameter must be >= 4096 so the ldisc read buffer is empty 3. the subsequent read() occurs before the kicked worker has processed more input However, the underlying cause of the race is that data is pipelined, while tty state is not; ie., data already written by the pty slave end is not yet visible to the pty master end, but state changes by the pty slave end are visible to the pty master end immediately. Pipeline the TTY_OTHER_CLOSED state through input worker to the reader. 1. Introduce TTY_OTHER_DONE which is set by the input worker when TTY_OTHER_CLOSED is set and either the input buffers are flushed or input processing has completed. Readers/polls are woken when TTY_OTHER_DONE is set. 2. Reader/poll checks TTY_OTHER_DONE instead of TTY_OTHER_CLOSED. 3. A new input worker is started from pty_close() after setting TTY_OTHER_CLOSED, which ensures the TTY_OTHER_DONE state will be set if the last input worker is already finished (or just about to exit). Remove tty_flush_to_ldisc(); no in-tree callers. Fixes: 52bce7f8d4fc ("pty, n_tty: Simplify input processing on final close") Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=96311 BugLink: http://bugs.launchpad.net/bugs/1429756 Cc: <stable@vger.kernel.org> # 3.19+ Reported-by: Andy Whitcroft <apw@canonical.com> Reported-by: H.J. Lu <hjl.tools@gmail.com> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
A read() from a pty master may mistakenly indicate EOF (errno == -EIO)
after the pty slave has closed, even though input data remains to be read.
For example,

       pty slave       |        input worker        |    pty master
                       |                            |
                       |                            |   n_tty_read()
pty_write()            |                            |     input avail? no
  add data             |                            |     sleep
  schedule worker  --->|                            |     .
                       |---> flush_to_ldisc()       |     .
pty_close()            |       fill read buffer     |     .
  wait for worker      |       wakeup reader    --->|     .
                       |       read buffer full?    |---> input avail ? yes
                       |<---   yes - exit worker    |     copy 4096 bytes to user
  TTY_OTHER_CLOSED <---|                            |<--- kick worker
                       |                            |

		                **** New read() before worker starts ****

                       |                            |   n_tty_read()
                       |                            |     input avail? no
                       |                            |     TTY_OTHER_CLOSED? yes
                       |                            |     return -EIO

Several conditions are required to trigger this race:
1. the ldisc read buffer must become full so the input worker exits
2. the read() count parameter must be >= 4096 so the ldisc read buffer
   is empty
3. the subsequent read() occurs before the kicked worker has processed
   more input

However, the underlying cause of the race is that data is pipelined, while
tty state is not; ie., data already written by the pty slave end is not
yet visible to the pty master end, but state changes by the pty slave end
are visible to the pty master end immediately.

Pipeline the TTY_OTHER_CLOSED state through input worker to the reader.
1. Introduce TTY_OTHER_DONE which is set by the input worker when
   TTY_OTHER_CLOSED is set and either the input buffers are flushed or
   input processing has completed. Readers/polls are woken when
   TTY_OTHER_DONE is set.
2. Reader/poll checks TTY_OTHER_DONE instead of TTY_OTHER_CLOSED.
3. A new input worker is started from pty_close() after setting
   TTY_OTHER_CLOSED, which ensures the TTY_OTHER_DONE state will be
   set if the last input worker is already finished (or just about to
   exit).

Remove tty_flush_to_ldisc(); no in-tree callers.

Fixes: 52bce7f8d4fc ("pty, n_tty: Simplify input processing on final close")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=96311
BugLink: http://bugs.launchpad.net/bugs/1429756
Cc: <stable@vger.kernel.org> # 3.19+
Reported-by: Andy Whitcroft <apw@canonical.com>
Reported-by: H.J. Lu <hjl.tools@gmail.com>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc 2015-05-09T23:13:38+00:00 Linus Torvalds torvalds@linux-foundation.org 2015-05-09T23:13:38+00:00 8f59ae0643b2057ad996ab23488e9be1ba2564f4 Pull ARM SoC fixes from Arnd Bergmann: "A few patches have come up since the merge window. The largest one is a rewrite of the PXA lubbock/mainstone IRQ handling. This was already broken in 2011 by a change to the GPIO code and only noticed now. The other changes contained here are: MAINTAINERS file updates: - Ray Jui and Scott Branden are now co-maintainers for some of the mach-bcm chips, while Christian Daudt and Marc Carino have stepped down. - Andrew Victor is no longer maintaining at91. Instead, Alexandre Belloni now becomes an official maintainer, after having done a bulk of the work for a while. - Baruch Siach, who added the mach-digicolor platform in 4.1 is now listed as maintainer - The git URL for mach-socfpga has changed Bug fixes: - Three bug fixes for new rockchip rk3288 code - A regression fix to make SD card support work on certain ux500 boards - multiple smaller dts fixes for imx, omap, mvebu, and shmobile - a regression fiix for omap3 power consumption - a fix for regression in the ARM CCI bus driver Configuration changes: - more imx platforms are now enabled in multi_v7_defconfig" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (39 commits) MAINTAINERS: add Conexant Digicolor machines entry MAINTAINERS: socfpga: update the git repo for SoCFPGA ARM: multi_v7_defconfig: Select more FSL SoCs MAINTAINERS: replace an AT91 maintainer drivers: CCI: fix used_mask init in validate_group() bus: omap_l3_noc: Fix master id address decoding for OMAP5 bus: omap_l3_noc: Fix offset for DRA7 CLK1_HOST_CLK1_2 instance ARM: dts: dra7: Fix efuse register size for ABB ARM: dts: am57xx-beagle-x15: Switch GPIO fan number ARM: dts: am57xx-beagle-x15: Switch UART mux pins ARM: dts: am437x-sk: reduce col-scan-delay-us ARM: dts: am437x-sk: fix for new newhaven display module revision ARM: dts: am57xx-beagle-x15: Fix RTC aliases ARM: dts: am57xx-beagle-x15: Fix IRQ type for mcp7941x ARM: dts: omap3: Add #iommu-cells to isp and iva iommu ARM: omap2plus_defconfig: Enable EXTCON_USB_GPIO ARM: dts: OMAP3-N900: Add microphone bias voltages ARM: OMAP2+: Fix omap off idle power consumption creeping up MAINTAINERS: Update brcmstb entry MAINTAINERS: Remove Christian Daudt for mach-bcm ... 
Pull ARM SoC fixes from Arnd Bergmann:
 "A few patches have come up since the merge window.  The largest one is
  a rewrite of the PXA lubbock/mainstone IRQ handling.  This was already
  broken in 2011 by a change to the GPIO code and only noticed now.

  The other changes contained here are:

  MAINTAINERS file updates:

   - Ray Jui and Scott Branden are now co-maintainers for some of the
     mach-bcm chips, while Christian Daudt and Marc Carino have stepped
     down.

   - Andrew Victor is no longer maintaining at91.  Instead, Alexandre
     Belloni now becomes an official maintainer, after having done a
     bulk of the work for a while.

   - Baruch Siach, who added the mach-digicolor platform in 4.1 is now
     listed as maintainer

   - The git URL for mach-socfpga has changed

  Bug fixes:

   - Three bug fixes for new rockchip rk3288 code

   - A regression fix to make SD card support work on certain ux500
     boards

   - multiple smaller dts fixes for imx, omap, mvebu, and shmobile

   - a regression fiix for omap3 power consumption

   - a fix for regression in the ARM CCI bus driver

  Configuration changes:

   - more imx platforms are now enabled in multi_v7_defconfig"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (39 commits)
  MAINTAINERS: add Conexant Digicolor machines entry
  MAINTAINERS: socfpga: update the git repo for SoCFPGA
  ARM: multi_v7_defconfig: Select more FSL SoCs
  MAINTAINERS: replace an AT91 maintainer
  drivers: CCI: fix used_mask init in validate_group()
  bus: omap_l3_noc: Fix master id address decoding for OMAP5
  bus: omap_l3_noc: Fix offset for DRA7 CLK1_HOST_CLK1_2 instance
  ARM: dts: dra7: Fix efuse register size for ABB
  ARM: dts: am57xx-beagle-x15: Switch GPIO fan number
  ARM: dts: am57xx-beagle-x15: Switch UART mux pins
  ARM: dts: am437x-sk: reduce col-scan-delay-us
  ARM: dts: am437x-sk: fix for new newhaven display module revision
  ARM: dts: am57xx-beagle-x15: Fix RTC aliases
  ARM: dts: am57xx-beagle-x15: Fix IRQ type for mcp7941x
  ARM: dts: omap3: Add #iommu-cells to isp and iva iommu
  ARM: omap2plus_defconfig: Enable EXTCON_USB_GPIO
  ARM: dts: OMAP3-N900: Add microphone bias voltages
  ARM: OMAP2+: Fix omap off idle power consumption creeping up
  MAINTAINERS: Update brcmstb entry
  MAINTAINERS: Remove Christian Daudt for mach-bcm
  ...
Merge tag 'pm+acpi-4.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm 2015-05-07T22:58:00+00:00 Linus Torvalds torvalds@linux-foundation.org 2015-05-07T22:58:00+00:00 3e0283a53f7d2f2dae7bc4aa7f3104cb5988018f Pull power management and ACPI fixes from Rafael Wysocki: "These include three regression fixes (PCI resources management, ACPI/PNP device enumeration, ACPI SBS on MacBook) and two ACPI documentation fixes related to GPIO. Specifics: - Fix for a PCI resources management regression introduced during the 4.0 cycle and related to the handling of ACPI resources' Producer/Consumer flags that turn out to be useless (Jiang Liu) - Fix for a MacBook regression related to the Smart Battery Subsystem (SBS) driver causing various problems (stalls on boot, failure to detect or report battery) to happen and introduced during the 3.18 cycle (Chris Bainbridge) - Fix for an ACPI/PNP device enumeration regression introduced during the 3.16 cycle caused by failing to include two PNP device IDs into the list of IDs that PNP device objects need to be created for (Witold Szczeponik) - Fixes for two minor mistakes in the ACPI GPIO properties documentation (Antonio Ospite, Rafael J Wysocki)" * tag 'pm+acpi-4.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / PNP: add two IDs to list for PNPACPI device enumeration ACPI / documentation: Fix ambiguity in the GPIO properties document ACPI / documentation: fix a sentence about GPIO resources ACPI / SBS: Add 5 us delay to fix SBS hangs on MacBook x86/PCI/ACPI: Make all resources except [io 0xcf8-0xcff] available on PCI bus 
Pull power management and ACPI fixes from Rafael Wysocki:
 "These include three regression fixes (PCI resources management,
  ACPI/PNP device enumeration, ACPI SBS on MacBook) and two ACPI
  documentation fixes related to GPIO.

  Specifics:

   - Fix for a PCI resources management regression introduced during the
     4.0 cycle and related to the handling of ACPI resources'
     Producer/Consumer flags that turn out to be useless (Jiang Liu)

   - Fix for a MacBook regression related to the Smart Battery Subsystem
     (SBS) driver causing various problems (stalls on boot, failure to
     detect or report battery) to happen and introduced during the 3.18
     cycle (Chris Bainbridge)

   - Fix for an ACPI/PNP device enumeration regression introduced during
     the 3.16 cycle caused by failing to include two PNP device IDs into
     the list of IDs that PNP device objects need to be created for
     (Witold Szczeponik)

   - Fixes for two minor mistakes in the ACPI GPIO properties
     documentation (Antonio Ospite, Rafael J Wysocki)"

* tag 'pm+acpi-4.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / PNP: add two IDs to list for PNPACPI device enumeration
  ACPI / documentation: Fix ambiguity in the GPIO properties document
  ACPI / documentation: fix a sentence about GPIO resources
  ACPI / SBS: Add 5 us delay to fix SBS hangs on MacBook
  x86/PCI/ACPI: Make all resources except [io 0xcf8-0xcff] available on PCI bus
Merge branches 'acpi-resources', 'acpi-battery', 'acpi-doc' and 'acpi-pnp' 2015-05-07T19:24:34+00:00 Rafael J. Wysocki rafael.j.wysocki@intel.com 2015-05-07T19:24:34+00:00 9a5d9315e41cc0dfc97a3b0a8e222d30566cf3fe * acpi-resources: x86/PCI/ACPI: Make all resources except [io 0xcf8-0xcff] available on PCI bus * acpi-battery: ACPI / SBS: Add 5 us delay to fix SBS hangs on MacBook * acpi-doc: ACPI / documentation: Fix ambiguity in the GPIO properties document ACPI / documentation: fix a sentence about GPIO resources * acpi-pnp: ACPI / PNP: add two IDs to list for PNPACPI device enumeration 
* acpi-resources:
  x86/PCI/ACPI: Make all resources except [io 0xcf8-0xcff] available on PCI bus

* acpi-battery:
  ACPI / SBS: Add 5 us delay to fix SBS hangs on MacBook

* acpi-doc:
  ACPI / documentation: Fix ambiguity in the GPIO properties document
  ACPI / documentation: fix a sentence about GPIO resources

* acpi-pnp:
  ACPI / PNP: add two IDs to list for PNPACPI device enumeration
Merge tag 'omap-for-v4.1/fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes 2015-05-07T16:25:38+00:00 Arnd Bergmann arnd@arndb.de 2015-05-07T16:25:38+00:00 443318e0b776562593f4d4fd770055a9d31add54 Merge "omap fixes against v4.1-rc1" from Tony Lindgren: Fixes for omaps, mostly a fix for power power consumption creeping up during idle, and two l3-noc device fixes: - Fix power consumption creeping up with I2C4 staying on - Fix n900 microphone bias voltages - Fix dra7 l3-noc for host clock - Fix omap5 l3-noc id address decoding The rest are all just minor dts fixes: - Fix changed EXTCON_USB_GPIO_USB in defconfig - Fix missing isp and iva #iommu-cells property - Various beagle x15 dts fixes for pre-production changes - Fix am437x-sk display dts entries * tag 'omap-for-v4.1/fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: bus: omap_l3_noc: Fix master id address decoding for OMAP5 bus: omap_l3_noc: Fix offset for DRA7 CLK1_HOST_CLK1_2 instance ARM: dts: dra7: Fix efuse register size for ABB ARM: dts: am57xx-beagle-x15: Switch GPIO fan number ARM: dts: am57xx-beagle-x15: Switch UART mux pins ARM: dts: am437x-sk: reduce col-scan-delay-us ARM: dts: am437x-sk: fix for new newhaven display module revision ARM: dts: am57xx-beagle-x15: Fix RTC aliases ARM: dts: am57xx-beagle-x15: Fix IRQ type for mcp7941x ARM: dts: omap3: Add #iommu-cells to isp and iva iommu ARM: omap2plus_defconfig: Enable EXTCON_USB_GPIO ARM: dts: OMAP3-N900: Add microphone bias voltages ARM: OMAP2+: Fix omap off idle power consumption creeping up 
Merge "omap fixes against v4.1-rc1" from Tony Lindgren:

Fixes for omaps, mostly a fix for power power consumption
creeping up during idle, and two l3-noc device fixes:

- Fix power consumption creeping up with I2C4 staying on
- Fix n900 microphone bias voltages
- Fix dra7 l3-noc for host clock
- Fix omap5 l3-noc id address decoding

The rest are all just minor dts fixes:

- Fix changed EXTCON_USB_GPIO_USB in defconfig
- Fix missing isp and iva #iommu-cells property
- Various beagle x15 dts fixes for pre-production changes
- Fix am437x-sk display dts entries

* tag 'omap-for-v4.1/fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  bus: omap_l3_noc: Fix master id address decoding for OMAP5
  bus: omap_l3_noc: Fix offset for DRA7 CLK1_HOST_CLK1_2 instance
  ARM: dts: dra7: Fix efuse register size for ABB
  ARM: dts: am57xx-beagle-x15: Switch GPIO fan number
  ARM: dts: am57xx-beagle-x15: Switch UART mux pins
  ARM: dts: am437x-sk: reduce col-scan-delay-us
  ARM: dts: am437x-sk: fix for new newhaven display module revision
  ARM: dts: am57xx-beagle-x15: Fix RTC aliases
  ARM: dts: am57xx-beagle-x15: Fix IRQ type for mcp7941x
  ARM: dts: omap3: Add #iommu-cells to isp and iva iommu
  ARM: omap2plus_defconfig: Enable EXTCON_USB_GPIO
  ARM: dts: OMAP3-N900: Add microphone bias voltages
  ARM: OMAP2+: Fix omap off idle power consumption creeping up
Merge tag 'imx-fixes-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes 2015-05-07T16:21:57+00:00 Arnd Bergmann arnd@arndb.de 2015-05-07T16:21:57+00:00 c92b83a81ad09267619ccd077ddd2a5e321d8a61 Pull "The i.MX fixes for 4.1" from Shawn Guo: - A couple of imx23-olinuxino device tree fixes regarding to LED GPIO polarity and USB dr_mode setting - One i.MX28 device tree fix on AUART4 TX-DMA interrupt name - Add missing pwm-cells to PWM4 for i.MX25 device tree - Fix imx6q-phytec device tree to get correct USB VBUS control - Drop invalid pinctrl-assert-gpios property from imx6qdl-sabreauto device tree, which was sneaked in from vendor device tree - One fix on Wolfram's broken email address * tag 'imx-fixes-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx6qdl-sabreauto: remove pinctrl-assert-gpios ARM: dts: imx28: Fix AUART4 TX-DMA interrupt name ARM: dts: imx25: Add #pwm-cells to pwm4 ARM: dts: imx6: phyFLEX: USB VBUS control is active-high ARM: mach-imx: devices: platform-sdhci-esdhc-imx: fix broken email address ARM: dts: imx23-olinuxino: Fix dr_mode of usb0 ARM: dts: imx23-olinuxino: Fix polarity of LED GPIO 
Pull "The i.MX fixes for 4.1" from Shawn Guo:

 - A couple of imx23-olinuxino device tree fixes regarding to LED GPIO
   polarity and USB dr_mode setting
 - One i.MX28 device tree fix on AUART4 TX-DMA interrupt name
 - Add missing pwm-cells to PWM4 for i.MX25 device tree
 - Fix imx6q-phytec device tree to get correct USB VBUS control
 - Drop invalid pinctrl-assert-gpios property from imx6qdl-sabreauto
   device tree, which was sneaked in from vendor device tree
 - One fix on Wolfram's broken email address

* tag 'imx-fixes-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: dts: imx6qdl-sabreauto: remove pinctrl-assert-gpios
  ARM: dts: imx28: Fix AUART4 TX-DMA interrupt name
  ARM: dts: imx25: Add #pwm-cells to pwm4
  ARM: dts: imx6: phyFLEX: USB VBUS control is active-high
  ARM: mach-imx: devices: platform-sdhci-esdhc-imx: fix broken email address
  ARM: dts: imx23-olinuxino: Fix dr_mode of usb0
  ARM: dts: imx23-olinuxino: Fix polarity of LED GPIO
Merge tag 'for-linus-4.1-1' of git://git.code.sf.net/p/openipmi/linux-ipmi 2015-05-06T02:42:01+00:00 Linus Torvalds torvalds@linux-foundation.org 2015-05-06T02:42:01+00:00 5198b44374adb3f6143459a03c37f103f8a09548 Pull IPMI fixes from Corey Minyard: "Lots of minor IPMI fixes, especially ones that have have come up since the SSIF driver has been in the main kernel for a while" * tag 'for-linus-4.1-1' of git://git.code.sf.net/p/openipmi/linux-ipmi: ipmi: Fix multi-part message handling ipmi: Add alert handling to SSIF ipmi: Fix a problem that messages are not issued in run_to_completion mode ipmi: Report an error if ACPI _IFT doesn't exist ipmi: Remove unused including <linux/version.h> ipmi: Don't report err in the SI driver for SSIF devices ipmi: Remove incorrect use of seq_has_overflowed ipmi:ssif: Ignore spaces when comparing I2C adapter names ipmi_ssif: Fix the logic on user-supplied addresses 
Pull IPMI fixes from Corey Minyard:
 "Lots of minor IPMI fixes, especially ones that have have come up since
  the SSIF driver has been in the main kernel for a while"

* tag 'for-linus-4.1-1' of git://git.code.sf.net/p/openipmi/linux-ipmi:
  ipmi: Fix multi-part message handling
  ipmi: Add alert handling to SSIF
  ipmi: Fix a problem that messages are not issued in run_to_completion mode
  ipmi: Report an error if ACPI _IFT doesn't exist
  ipmi: Remove unused including <linux/version.h>
  ipmi: Don't report err in the SI driver for SSIF devices
  ipmi: Remove incorrect use of seq_has_overflowed
  ipmi:ssif: Ignore spaces when comparing I2C adapter names
  ipmi_ssif: Fix the logic on user-supplied addresses