Pull hotfixes from Andrew Morton:
 "Minor things, mainly - mailmap updates, MAINTAINERS updates, etc.

  Fixes for this merge window:

   - fix for a damon boot hang, from SeongJae

   - fix for a kfence warning splat, from Jason Donenfeld

   - fix for zero-pfn pinning, from Alex Williamson

   - fix for fallocate hole punch clearing, from Mike Kravetz

  Fixes for previous releases:

   - fix for a performance regression, from Marcelo

   - fix for a hwpoisining BUG from zhenwei pi"

* tag 'mm-hotfixes-stable-2022-06-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  mailmap: add entry for Christian Marangi
  mm/memory-failure: disable unpoison once hw error happens
  hugetlbfs: zero partial pages during fallocate hole punch
  mm: memcontrol: reference to tools/cgroup/memcg_slabinfo.py
  mm: re-allow pinning of zero pfns
  mm/kfence: select random number before taking raw lock
  MAINTAINERS: add maillist information for LoongArch
  MAINTAINERS: update MM tree references
  MAINTAINERS: update Abel Vesa's email
  MAINTAINERS: add MEMORY HOT(UN)PLUG section and add David as reviewer
  MAINTAINERS: add Miaohe Lin as a memory-failure reviewer
  mailmap: add alias for jarkko@profian.com
  mm/damon/reclaim: schedule 'damon_reclaim_timer' only after 'system_wq' is initialized
  kthread: make it clear that kthread_create_on_node() might be terminated by any fatal signal
  mm: lru_cache_disable: use synchronize_rcu_expedited
  mm/page_isolation.c: fix one kernel-doc comment

Pull btrfs fixes from David Sterba:

 - zoned relocation fixes:
      - fix critical section end for extent writeback, this could lead
        to out of order write
      - prevent writing to previous data relocation block group if space
        gets low

 - reflink fixes:
      - fix race between reflinking and ordered extent completion
      - proper error handling when block reserve migration fails
      - add missing inode iversion/mtime/ctime updates on each iteration
        when replacing extents

 - fix deadlock when running fsync/fiemap/commit at the same time

 - fix false-positive KCSAN report regarding pid tracking for read locks
   and data race

 - minor documentation update and link to new site

* tag 'for-5.19-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  Documentation: update btrfs list of features and link to readthedocs.io
  btrfs: fix deadlock with fsync+fiemap+transaction commit
  btrfs: don't set lock_owner when locking extent buffer for reading
  btrfs: zoned: fix critical section of relocation inode writeback
  btrfs: zoned: prevent allocation from previous data relocation BG
  btrfs: do not BUG_ON() on failure to migrate space when replacing extents
  btrfs: add missing inode updates on each iteration when replacing extents
  btrfs: fix race between reflinking and ordered extent completion

Pull Kbuild fixes from Masahiro Yamada:

 - Fix modpost to detect EXPORT_SYMBOL marked as __init or__exit

 - Update the supported arch list in the LLVM document

 - Avoid the second link of vmlinux for CONFIG_TRIM_UNUSED_KSYMS

 - Avoid false __KSYM___this_module define in include/generated/autoksyms.h

* tag 'kbuild-fixes-v5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: Ignore __this_module in gen_autoksyms.sh
  kbuild: link vmlinux only once for CONFIG_TRIM_UNUSED_KSYMS (2nd attempt)
  Documentation/llvm: Update Supported Arch table
  modpost: fix section mismatch check for exported init/exit sections

Pull IIO driver fixes from Greg KH:
 "Here are a set of IIO driver fixes for 5.19-rc4. Jonathan said it best
  in his pull request to me, so I'll just quote it here below, as that's
  the only changes we have right now for the char-misc driver tree:

  testing:
      - Fix a missing MODULE_LICENSE() warning by restricting possible
        build configs.

  Various drivers:
      - Fix ordering of iio_get_trigger() being called before
        iio_trigger_register()

  adi,admv1014:
      - Fix dubious x & !y warning.

  adi,axi-adc:
      - Fix missing of_node_put() in error and normal paths.

  aspeed,adc:
      - Add missing of_node_put()

  fsl,mma8452:
      - Fix broken probing from device tree.
      - Drop check on return value of i2c write to device to cause reset
        as ACK will be missing (device reset before sending it).

  fsl,vf610:
      - Fix documentation of in_conversion_mode ABI.

  iio-trig-sysfs:
      - Ensure irq work has finished before freeing the trigger.

  invensense,mpu3050:
      - Disable regulators in error path.

  invensense,icm42600:
      - Fix collision of enum value of 0 with error path where 0 is no
        match.

  renesas,rzg2l_Adc:
      - Add missing fwnode_handle_put() in error path.

  rescale:
      - Fix a boolean logic bug for detection of raw + scale affecting
        an obscure corner case.

  semtech,sx9324:
      - Check return value of read of pin_defs

  st,stm32-adc:
      - Fix interaction across ADC instances for some supported devices.
      - Drop false spurious IRQ messages.
      - Fix calibration value handling. If we can't calibrate don't
        expose the vref_int channel.
      - Fix maximum clock rate for stm32pm15x

  ti,ads131e08:
      - Add missing fwnode_handle_put() in error paths.

  xilinx,ams:
      - Fix variable checked for error from platform_get_irq()

  x-powers,axp288:
      - Overide TS_PIN bias current for boards where it is not correctly
        initialized.

  yamaha,yas530:
      - Fix inverted check on calibration data being all zeros.

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'char-misc-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (26 commits)
  iio:proximity:sx9324: Check ret value of device_property_read_u32_array()
  iio: accel: mma8452: ignore the return value of reset operation
  iio: adc: stm32: fix maximum clock rate for stm32mp15x
  iio: adc: stm32: fix vrefint wrong calibration value handling
  iio: imu: inv_icm42600: Fix broken icm42600 (chip id 0 value)
  iio: adc: vf610: fix conversion mode sysfs node name
  iio: adc: adi-axi-adc: Fix refcount leak in adi_axi_adc_attach_client
  iio: test: fix missing MODULE_LICENSE for IIO_RESCALE=m
  iio:humidity:hts221: rearrange iio trigger get and register
  iio:chemical:ccs811: rearrange iio trigger get and register
  iio:accel:mxc4005: rearrange iio trigger get and register
  iio:accel:kxcjk-1013: rearrange iio trigger get and register
  iio:accel:bma180: rearrange iio trigger get and register
  iio: afe: rescale: Fix boolean logic bug
  iio: adc: aspeed: Fix refcount leak in aspeed_adc_set_trim_data
  iio: adc: stm32: Fix IRQs on STM32F4 by removing custom spurious IRQs message
  iio: adc: stm32: Fix ADCs iteration in irq handler
  iio: adc: ti-ads131e08: add missing fwnode_handle_put() in ads131e08_alloc_channels()
  iio: adc: rzg2l_adc: add missing fwnode_handle_put() in rzg2l_adc_parse_properties()
  iio: trigger: sysfs: fix use-after-free on remove
  ...

Pull USB driver fixes from Greg KH:
 "Here are some small USB driver fixes and new device ids for 5.19-rc4
  for a few small reported issues. They include:

   - new usb-serial driver ids

   - MAINTAINERS file update to properly catch the USB dts files

   - dt-bindings fixes for reported build warnings

   - xhci driver fixes for reported problems

   - typec Kconfig dependancy fix

   - raw_gadget fuzzing fixes found by syzbot

   - chipidea driver bugfix

   - usb gadget uvc bugfix

  All of these have been in linux-next with no reported issues"

* tag 'usb-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: chipidea: udc: check request status before setting device address
  USB: gadget: Fix double-free bug in raw_gadget driver
  xhci-pci: Allow host runtime PM as default for Intel Meteor Lake xHCI
  xhci-pci: Allow host runtime PM as default for Intel Raptor Lake xHCI
  xhci: turn off port power in shutdown
  xhci: Keep interrupt disabled in initialization until host is running.
  USB: serial: option: add Quectel RM500K module support
  USB: serial: option: add Quectel EM05-G modem
  USB: serial: pl2303: add support for more HXN (G) types
  usb: typec: wcove: Drop wrong dependency to INTEL_SOC_PMIC
  usb: gadget: uvc: fix list double add in uvcg_video_pump
  dt-bindings: usb: ehci: Increase the number of PHYs
  dt-bindings: usb: ohci: Increase the number of PHYs
  usb: gadget: Fix non-unique driver names in raw-gadget driver
  MAINTAINERS: add include/dt-bindings/usb to USB SUBSYSTEM
  USB: serial: option: add Telit LE910Cx 0x1250 composition

Pull gpio fixes from Bartosz Golaszewski:

 - make the irqchip immutable in gpio-realtek-otto

 - fix error code propagation in gpio-winbond

 - fix device removing in gpio-grgpio

 - fix a typo in gpio-mxs which indicates the driver is for a different
   model

 - documentation fixes

 - MAINTAINERS file updates

* tag 'gpio-fixes-for-v5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio: mxs: Fix header comment
  gpio: Fix kernel-doc comments to nested union
  gpio: grgpio: Fix device removing
  gpio: winbond: Fix error code in winbond_gpio_get()
  gpio: realtek-otto: Make the irqchip immutable
  docs: driver-api: gpio: Fix filename mismatch
  MAINTAINERS: add include/dt-bindings/gpio to GPIO SUBSYSTEM

Pull spi fixes from Mark Brown:
 "A bunch of driver specific fixes, plus a fix for spi-mem's status
  polling for devices that use GPIO chip selects and a DT bindings
  examples fix that helps with the validation work"

* tag 'spi-fix-v5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: rockchip: Unmask IRQ at the final to avoid preemption
  spi: dt-bindings: Fix unevaluatedProperties warnings in examples
  spi: spi-mem: Fix spi_mem_poll_status()
  spi: cadence: Detect transmit FIFO depth
  spi: spi-cadence: Fix SPI CS gets toggling sporadically

"make dtbs_check":

    arch/arm/boot/dts/r8a77470-iwg23s-sbc.dtb: usb@ee080100: phys: [[17, 0], [31]] is too long
	    From schema: Documentation/devicetree/bindings/usb/generic-ehci.yaml
    arch/arm/boot/dts/r8a77470-iwg23s-sbc.dtb: usb@ee0c0100: phys: [[17, 1], [33], [21, 0]] is too long
	    From schema: Documentation/devicetree/bindings/usb/generic-ehci.yaml

Some USB EHCI controllers (e.g. on the Renesas RZ/G1C SoC) have multiple
PHYs.  Increase the maximum number of PHYs to 3, which is sufficient for
now.

Fixes: 0499220d6dadafa5 ("dt-bindings: Add missing array size constraints")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/c5d19e2f9714f43effd90208798fc1936098078f.1655301043.git.geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

"make dtbs_check":

    arch/arm/boot/dts/r8a77470-iwg23s-sbc.dtb: usb@ee080000: phys: [[17, 0], [31]] is too long
	    From schema: Documentation/devicetree/bindings/usb/generic-ohci.yaml
    arch/arm/boot/dts/r8a77470-iwg23s-sbc.dtb: usb@ee0c0000: phys: [[17, 1], [33], [21, 0]] is too long
	    From schema: Documentation/devicetree/bindings/usb/generic-ohci.yaml

Some USB OHCI controllers (e.g. on the Renesas RZ/G1C SoC) have multiple
PHYs.  Increase the maximum number of PHYs to 3, which is sufficient for
now.

Fixes: 0499220d6dadafa5 ("dt-bindings: Add missing array size constraints")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/0112f9c8881513cb33bf7b66bc743dd08b35a2f5.1655301203.git.geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The btrfs documentation in kernel is only meant as a starting point, so
update the list of features and add link to btrfs.readthedocs.io page
that is most up-to-date. The wiki is still used but information is
migrated from there.

Signed-off-by: David Sterba <dsterba@suse.com>