Pull RTC updates from Alexandre Belloni:

 - loongson: Loongson-2K0300 support

 - s35390a: nvmem support

 - zynqmp: rework calibration

* tag 'rtc-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  rtc: ds1390: fix number of bytes read from RTC
  rtc: class: Remove duplicate check for alarm
  rtc: optee: simplify OP-TEE context match
  rtc: interface: Alarm race handling should not discard preceding error
  rtc: s35390a: implement nvmem support
  rtc: loongson: Add Loongson-2K0300 support
  dt-bindings: rtc: loongson: Document Loongson-2K0300 compatible
  dt-bindings: rtc: loongson: Correct Loongson-1C interrupts property
  dt-bindings: rtc: renesas,rz-rtca3: Add RZ/V2N support
  dt-bindings: rtc: cpcap: convert to schema
  rtc: zynqmp: use dynamic max and min offset ranges
  rtc: zynqmp: rework set_offset
  rtc: zynqmp: rework read_offset
  rtc: zynqmp: check calibration max value
  rtc: zynqmp: correct frequency value
  rtc: amlogic-a4: Remove IRQF_ONESHOT
  rtc: pcf8563: use correct of_node for output clock
  rtc: max31335: use correct CONFIG symbol in IS_REACHABLE()
  rtc: nvvrs: Add ARCH_TEGRA to the NV VRS RTC driver

The current debug documentation does not mention that logs are printed
to stdout unless DEBUG_FILE is set. It also doesn't mention that
Coccinelle cannot overwrite debug files.

Document this behaviour in the examples and reference it in the
debugging section.

Signed-off-by: Benjamin Philip <benjamin.philip495@gmail.com>
Signed-off-by: Julia Lawall <julia.lawall@inria.fr>

Pull more i2c updates from Wolfram Sang:
 "Designware:
   - refactor the transfer path to support I2C_M_STOP
   - handle pm runtime by using the active auto try macros
   - handle controllers lacking explicit START and STOP conditions
   - general cleanups

  Other i2c drivers:
   - qualcomm: add support for qcs8300-cci
   - amd8111: general cleanups
   - cp2112: add DT bindings"

* tag 'i2c-for-7.0-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  dt-bindings: i2c: Add CP2112 HID USB to SMBus Bridge
  i2c: amd8111: switch to devm_ functions
  i2c: amd8111: Remove spaces in MODULE_* macros
  i2c: designware-platdrv: fix cleanup on probe failure
  i2c: designware-platdrv: simplify reset control
  dt-bindings: i2c: qcom-cci: Document qcs8300 compatible
  i2c: designware: Remove dead code in AMD ISP case
  i2c: designware: Support of controller with IC_EMPTYFIFO_HOLD_MASTER disabled
  i2c: designware: Use runtime PM macro for auto-cleanup
  i2c: designware: Implement I2C_M_STOP support

Pull sound fixes from Takashi Iwai:
 "Here are a bunch of updates, but there should be no big surprises;
  mostly device-specific quirks and fix-ups or non-code changes:

   - Quirks for ASoC AMD, HD-audio and USB-audio

   - Fixes in ASoC fsl, rockchip, renesas, aw codecs

   - Fixes for USB-audio packet handling in the implicit feedback mode

   - Updates of SPDX license IDs in some files"

* tag 'sound-fix-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (28 commits)
  ASoC: rockchip: i2s-tdm: Use param rate if not provided by set_sysclk
  ALSA: hda/hdmi: Add quirk for TUXEDO IBS14G6
  ASoC: dt-bindings: asahi-kasei,ak5558: Fix the supply names
  ASoC: dt-bindings: asahi-kasei,ak4458: Fix the supply names
  ASoC: dt-bindings: asahi-kasei,ak4458: set unevaluatedProperties:false
  ASoC: amd: amd_sdw: add machine driver quirk for Lenovo models
  ASoC: amd: acp: Add ACP7.0 match entries for Realtek parts
  ALSA: echoaudio: Add SPDX ids to some files
  ALSA: isa: Add SPDX id lines to some files
  ALSA: core: Add SPDX license id to files
  ASoC: tas2783A: add explicit port prepare handling
  ASoC: renesas: rz-ssi: Fix playback and capture
  ALSA: hda/realtek: Fix headset mic on ASUS Zenbook 14 UX3405MA
  ALSA: hda/conexant: Fix headphone jack handling on Acer Swift SF314
  ASoC: qcom: sm8250: Add quinary MI2S support
  ASoC: amd: yc: Add DMI quirk for ASUS Vivobook Pro 15X M6501RR
  ALSA: usb-audio: Avoid potentially repeated XRUN error messages
  ALSA: usb-audio: Add sanity check for OOB writes at silencing
  ALSA: usb-audio: Optimize the copy of packet sizes for implicit fb handling
  ALSA: usb-audio: Update the number of packets properly at receiving
  ...

Pull networking fixes from Jakub Kicinski:
 "Including fixes from Netfilter.

  Current release - new code bugs:

   - net: fix backlog_unlock_irq_restore() vs CONFIG_PREEMPT_RT

   - eth: mlx5e: XSK, Fix unintended ICOSQ change

   - phy_port: correctly recompute the port's linkmodes

   - vsock: prevent child netns mode switch from local to global

   - couple of kconfig fixes for new symbols

  Previous releases - regressions:

   - nfc: nci: fix false-positive parameter validation for packet data

   - net: do not delay zero-copy skbs in skb_attempt_defer_free()

  Previous releases - always broken:

   - mctp: ensure our nlmsg responses to user space are zero-initialised

   - ipv6: ioam: fix heap buffer overflow in __ioam6_fill_trace_data()

   - fixes for ICMP rate limiting

  Misc:

   - intel: fix PCI device ID conflict between i40e and ipw2200"

* tag 'net-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (85 commits)
  net: nfc: nci: Fix parameter validation for packet data
  net/mlx5e: Use unsigned for mlx5e_get_max_num_channels
  net/mlx5e: Fix deadlocks between devlink and netdev instance locks
  net/mlx5e: MACsec, add ASO poll loop in macsec_aso_set_arm_event
  net/mlx5: Fix misidentification of write combining CQE during poll loop
  net/mlx5e: Fix misidentification of ASO CQE during poll loop
  net/mlx5: Fix multiport device check over light SFs
  bonding: alb: fix UAF in rlb_arp_recv during bond up/down
  bnge: fix reserving resources from FW
  eth: fbnic: Advertise supported XDP features.
  rds: tcp: fix uninit-value in __inet_bind
  net/rds: Fix NULL pointer dereference in rds_tcp_accept_one
  octeontx2-af: Fix default entries mcam entry action
  net/mlx5e: XSK, Fix unintended ICOSQ change
  ipv6: icmp: icmpv6_xrlim_allow() optimization if net.ipv6.icmp.ratelimit is zero
  ipv4: icmp: icmpv4_xrlim_allow() optimization if net.ipv4.icmp_ratelimit is zero
  ipv6: icmp: remove obsolete code in icmpv6_xrlim_allow()
  inet: move icmp_global_{credit,stamp} to a separate cache line
  icmp: prevent possible overflow in icmp_global_allow()
  selftests/net: packetdrill: add ipv4-mapped-ipv6 tests
  ...

Following part was needed before the blamed commit, because
inet_getpeer_v6() second argument was the prefix.

	/* Give more bandwidth to wider prefixes. */
	if (rt->rt6i_dst.plen < 128)
		tmo >>= ((128 - rt->rt6i_dst.plen)>>5);

Now inet_getpeer_v6() retrieves hosts, we need to remove
@tmo adjustement or wider prefixes likes /24 allow 8x
more ICMP to be sent for a given ratelimit.

As we had this issue for a while, this patch changes net.ipv6.icmp.ratelimit
default value from 1000ms to 100ms to avoid potential regressions.

Also add a READ_ONCE() when reading net->ipv6.sysctl.icmpv6_time.

Fixes: fd0273d7939f ("ipv6: Remove external dependency on rt6i_dst and rt6i_src")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Cc: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20260216142832.3834174-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull more power management updates from Rafael Wysocki:
 "These are mostly fixes on top of the power management updates merged
  recently in cpuidle governors, in the Intel RAPL power capping driver
  and in the wake IRQ management code:

   - Fix the handling of package-scope MSRs in the intel_rapl power
     capping driver when called from the PMU subsystem and make it add
     all package CPUs to the PMU cpumask to allow tools to read RAPL
     events from any CPU in the package (Kuppuswamy Satharayananyan)

   - Rework the invalid version check in the intel_rapl_tpmi power
     capping driver to account for the fact that on partitioned systems,
     multiple TPMI instances may exist per package, but RAPL registers
     are only valid on one instance (Kuppuswamy Satharayananyan)

   - Describe the new intel_idle.table command line option in the
     admin-guide intel_idle documentation (Artem Bityutskiy)

   - Fix a crash in the ladder cpuidle governor on systems with only one
     (polling) idle state available by making the cpuidle core bypass
     the governor in those cases and adjust the other existing governors
     to that change (Aboorva Devarajan, Christian Loehle)

   - Update kerneldoc comments for wake IRQ management functions that
     have not been matching the code (Wang Jiayue)"

* tag 'pm-7.0-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpuidle: menu: Remove single state handling
  cpuidle: teo: Remove single state handling
  cpuidle: haltpoll: Remove single state handling
  cpuidle: Skip governor when only one idle state is available
  powercap: intel_rapl_tpmi: Remove FW_BUG from invalid version check
  PM: sleep: wakeirq: Update outdated documentation comments
  Documentation: PM: Document intel_idle.table command line option
  powercap: intel_rapl: Expose all package CPUs in PMU cpumask
  powercap: intel_rapl: Remove incorrect CPU check in PMU context

In the original txt format binding document ak4458.txt, the supply names
are 'AVDD-supply', 'DVDD-supply', and they are also used in driver. But in
the commit converting to yaml format, they are changed to 'avdd-supply',
'dvdd-supply'. After search all the dts file, these names 'AVDD-supply',
'DVDD-supply', 'avdd-supply', 'dvdd-supply' are not used in any dts
file. So it is safe to fix the yaml binding document.

Fixes: 829d78e3ea32 ("ASoC: dt-bindings: ak5558: Convert to dtschema")
Cc: stable@vger.kernel.org
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260212021829.3244736-4-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>

In the original txt format binding document ak4458.txt, the supply names
are 'AVDD-supply', 'DVDD-supply', and they are also used in driver. But in
the commit converting to yaml format, they are changed to 'avdd-supply',
'dvdd-supply'. After search all the dts file, these names 'AVDD-supply',
'DVDD-supply', 'avdd-supply', 'dvdd-supply' are not used in any dts
file. So it is safe to fix this yaml binding document.

Fixes: 009e83b591dd ("ASoC: dt-bindings: ak4458: Convert to dtschema")
Cc: stable@vger.kernel.org
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260212021829.3244736-3-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>