Pull networking fixes from Jakub Kicinski:
 "Including fixes from netfilter and IPsec.

  Current release - regressions:

   - do not acquire dev->tx_global_lock in netdev_watchdog_up()

   - ethtool: keep rtnl_lock for ops using ethtool_op_get_link()

   - fix deadlock in nested UP notifier events

  Current release - new code bugs:

   - eth:
      - cn20k: fix subbank free list indexing for search order
      - airoha: fix BQL underflow in shared QDMA TX ring

  Previous releases - regressions:

   - netfilter:
     - flowtable: fix offloaded ct timeout never being extended
     - nf_conncount: prevent connlimit drops for early confirmed ct

  Previous releases - always broken:

   - require CAP_NET_ADMIN in the originating netns when modifying
     cross-netns devices

   - report NAPI thread PID in the caller's pid namespace

   - mac802154: fix dirty frag in in-place crypto for IOT radios

   - sctp: hold socket lock when dumping endpoints in sctp_diag, avoid
     an overflow

   - eth: gve: fix header buffer corruption with header-split and HW-GRO

   - af_key: initialize alg_key_len for IPComp states, prevent OOB read"

* tag 'net-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (213 commits)
  selftests: bonding: add a test for VLAN propagation over a bonded real device
  vlan: defer real device state propagation to netdev_work
  net: add the driver-facing netdev_work scheduling API
  net: turn the rx_mode work into a generic netdev_work facility
  net: ethtool: keep rtnl_lock for ops using ethtool_op_get_link()
  rxrpc: Fix rxrpc_rotate_tx_rotate() to check there's something to rotate
  rxrpc: Fix leak of released call in recvmsg(MSG_PEEK)
  rxrpc: Fix socket notification race
  rxrpc: Fix potential infinite loop in rxrpc_recvmsg()
  rxrpc: Fix oob challenge leak in cleanup after notification failure
  rxrpc: Fix the reception of a reply packet before data transmission
  afs: Fix uncancelled rxrpc OOB message handler
  afs: Fix further netns teardown to cancel the preallocation charger
  rxrpc: Fix double unlock in rxrpc_recvmsg()
  rxrpc: Fix leak of connection from OOB challenge
  rxrpc: Fix ACKALL packet handling
  net: hns3: differentiate autoneg default values between copper and fiber
  net: hns3: fix permanent link down deadlock after reset
  net: hns3: refactor MAC autoneg and speed configuration
  net: hns3: unify copper port ksettings configuration path
  ...

Pull more documentation updates from Jonathan Corbet:
 "A handful of late-arriving docs fixes, along with one document update
  that fell through the cracks before"

* tag 'docs-7.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/docs/linux:
  docs: tools: Fix typo 'ackward' to 'awkward' in unittest.rst
  kdoc: xforms: ignore special static/inline macros
  kdoc: xforms_lists: handle DECLARE_PER_CPU() in kernel-doc
  MAINTAINERS: Fix regex for kdoc
  docs: kgdb: Fix path of driver options
  Documentation: tracing: fix typo in events documentation
  Docs/driver-api/uio-howto: document mmap_prepare callback
  docs/mm: clarify that we are not looking for LLM generated content
  kernel-doc: xforms: support __SYSFS_FUNCTION_ALTERNATIVE()

Emails to the maintainer of Qualcomm PPE Ethernet driver (Luo Jie
<quic_luoj@quicinc.com>) bounce permanently (full mailbox), because the
"quicinc.com" addresses were deprecated for public work.  All Qualcomm
contributors are aware of that and were asked to fix their addresses.

Driver is not supported - in terms of how netdev understands supported
commitment - if maintainer does not care to receive the patches for its
code, so demote it to "maintained" to reflect true status.

Fix all occurences of Luo Jie email address to preferred and working
domain.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Acked-by: Luo Jie <jie.luo@oss.qualcomm.com>
Link: https://patch.msgid.link/20260623073307.36483-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull pci updates from Bjorn Helgaas:
 "Enumeration:

   - Remove MPS/MRRS Kconfig settings (CONFIG_PCIE_BUS_*) that worked
     around a WiFi device defect; use a quirk or boot-time
     "pci=pcie_bus_tune_*" kernel parameter instead (Bjorn Helgaas)

   - Always lift 2.5GT/s restriction in PCIe failed link retraining to
     avoid clamping a link to 2.5GT/s after hot-plug changes the device
     (Maciej W. Rozycki)

   - Request bus reassignment when not probe-only to fix an enumeration
     regression on Marvell CN106XX and possibly other DT-based systems
     (Ratheesh Kannoth)

   - Fix procfs race between pci_proc_init() and pci_bus_add_device()
     that resulted in 'proc_dir_entry ... already registered' warnings
     and pointer corruption (Krzysztof Wilczyński)

   - Fix sysfs race that causes 'duplicate filename' warnings and boot
     panics by converting PCI resource files to static attributes
     (Krzysztof Wilczyński)

   - Expose sysfs 'resourceN_resize' attributes only on platforms with
     PCI mmap (Krzysztof Wilczyński)

   - Require CAP_SYS_ADMIN to write to sysfs 'resourceN_resize'
     attributes (Krzysztof Wilczyński)

   - Add security_locked_down(LOCKDOWN_PCI_ACCESS) to alpha PCI resource
     mmap path to match the generic path (Krzysztof Wilczyński)

   - Use kstrtobool() to parse the 'rom' attribute input to avoid the
     unexpected behavior of enabling the ROM when writing '0' with no
     trailing newline (Krzysztof Wilczyński)

  Resource management:

   - Improve resource claim logging for debuggability (Ilpo Järvinen)

   - Clean up several uses of const parameters (Ilpo Järvinen)

   - Check option ROM header signatures and lengths before accessing to
     avoid page faults and alignment faults (Guixin Liu)

  ASPM:

   - Don't reconfigure ASPM when entering low-power D-state; only do it
     when returning back to D0 (Carlos Bilbao)

  Power management:

   - During suspend, set power state to 'unknown' for all devices, not
     just those with drivers (Lukas Wunner)

   - Skip restoring Resizable BARs and VF Resizable BARs if device
     doesn't respond to config reads, to avoid invalid array accesses
     (Marco Nenciarini)

   - Add pci_suspend_retains_context() so drivers can tell whether
     devices retain internal state across suspend/resume, since some
     platforms reset devices on suspend; use this in nvme to avoid
     issues on Qcom RCs (Manivannan Sadhasivam)

  Power control:

   - Only to power on/off devices that actually support power control to
     avoid poking at incompatible devices mentioned in DT (Manivannan
     Sadhasivam)

  Virtualization and resets:

   - Log device readiness timeouts as errors, not warnings, because the
     device is likely unusable in this case (Bjorn Helgaas)

   - Wait for device readiness after soft reset (D3hot ->
     D0uninitialized transition), when the device may respond with
     Request Retry Status (RRS) if it needs more time to initialize
     (Bjorn Helgaas)

   - Drop unnecessary retries when restoring BARs because resets should
     now already include all required delays (Lukas Wunner)

   - Avoid FLR for MediaTek MT7925 WiFi, where FLR fails after a VM
     terminates uncleanly (Jose Ignacio Tornos Martinez)

   - Avoid SBR for Qualcomm WCN6855/WCN7850 WiFi, SDX62/SDX65 modems,
     which seem not to support it correctly (Jose Ignacio Tornos
     Martinez)

  Peer-to-peer DMA:

   - Prevent P2PDMA as well as CPU access to non-mappable BARs, e.g.,
     s390 ISM BARs (Matt Evans)

   - Add Intel QAT, DSA, IAA devices to whitelist (Lukas Wunner)

  Endpoint framework:

   - Add endpoint controller APIs for use by function drivers to
     discover auxiliary blocks like DMA engines (Koichiro Den)

   - Remember DesignWare eDMA engine base/size and expose them via the
     EPC aux-resource API (Koichiro Den)

   - Add endpoint embedded doorbell fallback, used if MSI allocation
     fails (Koichiro Den)

   - Validate BAR index and remove dead BAR read in endpoint doorbell
     test (Carlos Bilbao)

   - Unwind MSI/MSI-X vectors if NTB initialization fails part-way
     through (Koichiro Den)

   - Cache sleepable pci_irq_vector() value at ISR setup to avoid
     calling it from hardirq context (Koichiro Den)

   - Call sleepable pci_epc_raise_irq() from a work item instead of
     atomic context, e.g., when setting bits in NTB peer doorbells in
     the ntb_peer_db_set() path (Koichiro Den)

   - Report 0-based vNTB doorbell vector to account for link event 0 and
     historically skipped slot 1 (Koichiro Den)

   - Prevent configfs writes to vNTB db_count and other values that are
     already in use after EPC attach (Koichiro Den)

   - Account for vNTB db_valid reserved slots (link event 0 and
     historically skipped slot 1) so they don't appear as valid
     doorbells (Koichiro Den)

   - Implement vNTB .db_vector_count()/mask() for doorbells so clients
     can use multiple vectors and avoid thundering herds (Koichiro Den)

   - Report 0-based NTB doorbell vector to account for link event 0 and
     historically skipped slot 1 (Koichiro Den)

   - Fix doorbell bitmask and IRQ vector handling to clear only
     specified bits, use the correct vector for non-contiguous Linux IRQ
     numbers, and validate incoming vectors (Koichiro Den)

   - Implement NTB .db_vector_count()/mask() for doorbells so clients
     can use multiple vectors (Koichiro Den)

  Native PCIe controller infrastructure:

   - Add pci_host_common_link_train_delay() for the mandatory delay
     after > 5GT/s Link training completes and use it for cadence HPA,
     j721e, LGA; dwc; aardvark, mediatek-gen3, rzg3s (Hans Zhang)

   - Protect root bus removal with rescan lock in altera, brcmstb,
     cadence, dwc, iproc, mediatek, plda, rockchip to prevent
     use-after-free or crashes when racing with sysfs rescan or hotplug
     (Hans Zhang)

   - Add pci_host_common_parse_ports() for use by any native driver to
     parse Root Port properties (per-Link features like width, speed,
     PHY, power and reset control, etc should be described in Root Port
     stanzas, not the host bridge; currently only reset GPIOs
     implemented) (Sherry Sun)

  New native PCIe controller drivers:

   - Add DT binding and driver for UltraRISC DP1000 PCIe controller
     (Xincheng Zhang, Jia Wang)

  Altera PCIe controller driver:

   - Do not dispose of the parent IRQ mapping, which belongs to the
     parent interrupt controller (Mahesh Vaidya)

   - Fix chained IRQ handler ordering issue and resource leaks on probe
     failure (Mahesh Vaidya)

  AMD MDB PCIe controller driver:

   - Assert PERST# on shutdown so any connected Endpoints are held in
     reset during shutdown (Sai Krishna Musham)

  Amlogic Meson PCIe controller driver:

   - Propagate devm_add_action_or_reset() failure to fix probe error
     path (Shuvam Pandey)

   - Add .remove() callback to deinitialize the host bridge and power
     off the PHY (Shuvam Pandey)

  Broadcom iProc PCIe controller driver:

   - Restore .map_irq() assignment; its removal broke INTx on the iproc
     platform bus driver (Mark Tomlinson)

  Broadcom STB PCIe controller driver:

   - No change, but products using certain WiFi devices may be affected
     by removal of CONFIG_PCIE_BUS_* (see above)

  Freescale i.MX6 PCIe controller driver:

   - Move IMX6SX_GPR12_PCIE_TEST_POWERDOWN handling into the core reset
     functions (Richard Zhu)

   - Assert PERST# before enabling regulators to ensure that even if
     power is enabled, endpoint stays inactive until REFCLK is stable
     (Sherry Sun)

   - Parse reset properties in Root Port nodes (falling back to host
     bridge) to help support Key E connectors and the pwrctrl framework
     (Sherry Sun)

   - Configure i.MX95 REF_USE_PAD before PHY reset (Richard Zhu)

   - Assert i.MX95 ref_clk_en after reference clock stabilizes (Richard
     Zhu)

   - Integrate new pwrctrl API for DTs with Root Port-level power
     supplies (Sherry Sun)

  Intel Gateway PCIe controller driver:

   - Enable clock before PHY init for correct ordering (Florian Eckert)

   - Add .start_link() callback so the driver works again (Florian
     Eckert)

   - Stop overwriting the ATU base address discovered by
     dw_pcie_get_resources() (Florian Eckert)

   - Add DT 'atu' region since this is hardware-specific, and fall back
     to driver default if lacking (Florian Eckert)

  Loongson PCIe controller driver:

   - Ignore downstream devices only on internal bridges to avoid
     Loongson hardware issue (Rong Zhang)

   - Quirk old Loongson-3C6000 bridges that advertise incorrect
     supported link speeds (Ziyao Li)

  Marvell MVEBU PCIe controller driver:

   - Use fixed-width interrupt masks to avoid truncation in 64-bit
     builds (Rosen Penev)

  MediaTek PCIe controller driver:

   - Use FIELD_PREP() to fix incorrect operator precedence in
     PCIE_FTS_NUM_L0 (Li RongQing)

   - Fix IRQ domain leak when port fails to enable (Manivannan
     Sadhasivam)

   - Use actual physical address for MSI message address instead of
     virt_to_phys() (Manivannan Sadhasivam)

   - Add EcoNet EN7528 to DT binding (Caleb James DeLisle)

  MediaTek PCIe Gen3 controller driver:

   - Deassert PCIE_PHY_RSTB so REFCLK is stable for at least 100ms
     (PCIE_T_PVPERL_MS) before deasserting PERST# (Jian Yang)

   - Add .shutdown() to assert PERST# before powering down device (Jian
     Yang)

   - Do full device power down on removal, including asserting PERST#,
     when removing driver (Chen-Yu Tsai)

   - Fix a 'failed to create pwrctrl devices' error message that was
     inadvertently skipped (Chen-Yu Tsai)

  NVIDIA Tegra194 PCIe controller driver:

   - Program the DesignWare PORT_AFR L1 entrance latency based on the
     'aspm-l1-entry-delay-ns' DT property (Manikanta Maddireddy)

  Qualcomm PCIe controller driver:

   - Add Eliza SoC compatible in DT binding (Krishna Chaitanya Chundru)

   - Set max OPP during resume so DBI register accesses don't fail with
     NoC errors (Qiang Yu)

   - Add pci_host_common_d3cold_possible() to determine whether
     downstream devices are already in D3hot and wakeup-enabled devices
     are capable of generating PME from D3cold (Krishna Chaitanya
     Chundru)

   - Add .get_ltssm() callback to get the LTSSM status without DBI,
     since DBI may be inaccessible after PME_Turn_Off (Krishna Chaitanya
     Chundru)

   - Power down PHY via PARF_PHY_CTRL before disabling rails/clocks to
     avoid power leakage (Krishna Chaitanya Chundru)

   - Decide whether suspend should put the link in L2 and power down
     using pci_host_common_d3cold_possible() instead of checking whether
     ASPM L1 is enabled (Krishna Chaitanya Chundru)

   - Add qcom D3cold support to tear down interconnect bandwidth and OPP
     votes (Krishna Chaitanya Chundru)

   - Handle unsupported mixed PERST#/PHY DT configurations, e.g., PHY in
     RP node while PERST# is in the RC node, but warn about the DT issue
     (Qiang Yu)

   - Program T_POWER_ON based on DT 't-power-on-us' property in case
     hardware advertises incorrect values (Krishna Chaitanya Chundru)

   - Disable ASPM L0s for SA8775P (Shawn Guo)

   - Initialize DWC MSI lock for firmware-managed ECAM hosts, which
     don't use the dw_pcie_host_init() path that initializes the lock
     (Yadu M G)

  Renesas RZ/G3S PCIe controller driver:

   - Add RZ/V2N DT support (Lad Prabhakar)

  SOPHGO PCIe controller driver:

   - Add 'dma-coherent' DT property for sg2042-pcie driver (Han Gao)

  Synopsys DesignWare PCIe controller driver:

   - Apply ECRC TLP Digest workaround for all DesignWare cores prior to
     5.10a, not just 4.90a and 5.00a (Manikanta Maddireddy)

   - Use common struct dw_pcie 'mode' rather than duplicating it in
     artpec6, dra7xx, dwc-pcie, and keembay driver structs (Hans Zhang)

   - Use DEFINE_SHOW_ATTRIBUTE for ltssm_status debugfs to reduce
     boilerplate and fix a seq_file memory leak by including a
     .release() callback (Hans Zhang)

   - Fix a signedness bug in fault injection test code (Dan Carpenter)

   - Avoid NULL pointer dereference when tearing down debugfs for
     controller that lacks RAS DES capability (Shuvam Pandey)

  MicroSemi Switchtec management driver:

   - Add Gen6 Device IDs (Ben Reed)

  Miscellaneous:

   - Remove unused gpio.h include from amd-mdb, designware-plat, fu740,
     visconti drivers (Andy Shevchenko)

   - Fix typos in documentation (josh ziegler)

   - Use FIELD_MODIFY() instead of open-coding it (Hans Zhang)"

* tag 'pci-v7.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (168 commits)
  PCI/sysfs: Use kstrtobool() to parse the ROM attribute input
  PCI/sysfs: Limit BAR resize attribute scope to platforms with PCI mmap
  PCI/sysfs: Remove pci_create_legacy_files() and pci_sysfs_init()
  PCI/sysfs: Convert legacy I/O and memory attributes to static definitions
  PCI/sysfs: Add __weak pci_legacy_has_sparse() helper
  alpha/PCI: Compute legacy size in pci_mmap_legacy_page_range()
  PCI: Add macros for legacy I/O and memory address space sizes
  PCI/sysfs: Remove pci_{create,remove}_sysfs_dev_files()
  alpha/PCI: Convert resource files to static attributes
  alpha/PCI: Add static PCI resource attribute macros
  alpha/PCI: Remove WARN from __pci_mmap_fits() and __legacy_mmap_fits()
  alpha/PCI: Fix __pci_mmap_fits() overflow for zero-length BARs
  alpha/PCI: Use PCI resource accessor macros
  alpha/PCI: Use BAR index in sysfs attr->private instead of resource pointer
  alpha/PCI: Add security_locked_down() check to pci_mmap_resource()
  PCI/sysfs: Limit pci_sysfs_init() late_initcall compile scope
  PCI/sysfs: Add stubs for pci_{create,remove}_sysfs_dev_files()
  PCI/sysfs: Warn about BAR resize failure in __resource_resize_store()
  PCI/sysfs: Convert PCI resource files to static attributes
  PCI/proc: Fix race between pci_proc_init() and pci_bus_add_device()
  ...

Pull apparmor updates from John Johansen:
 "Another round of bug fixing and some code cleanups, there are no new
  features. The biggest thing to note is Georgia is being added to help
  co-maintain apparmor.

  Cleanups:
   - replace get_zeroed_page() with kzalloc()
   - remove unnecessary goto and associated label
   - change fn_label_build() to return err on failure instead of NULL or
     err
   - free rawdata as soon as possible
   - use explicit instead of implicit flex array in rawdata_f_data
   - use __label_make_stale in __aa_proxy_redirect
   - return correct error by propagate -ENOMEM correctly in unpack_table
   - aa_label_alloc use aa_label_free on alloc failure
   - add a conditional version of get_newest_label

  Bug Fixes:
   - mediate the implicit connect of TCP fast open sendmsg
   - fix C23ism of label immediately before a declaration
   - fix kernel-doc warnings
   - fix spelling mistakes
   - fix use-after-free in rawdata dedup loop
   - Fix inverted comparison in cache_hold_inc()
   - fix uninitialized pointer passed to audit_log_untrustedstring()
   - don't audit files pointing to aa_null.dentry
   - put secmark label after secid lookup
   - fix aa_getprocattr free procattr leak on format failure
   - release exe file resources on path failure
   - fail policy unpack on accept2 allocation failure
   - Fix return in ns_mkdir_op
   - remove or add symlinks to rawdata according to export_binary
   - fix NULL pointer dereference in unpack_pdb
   - fix potential UAF in aa_replace_profiles
   - grab ns lock and refresh when looking up changehat child profiles
   - enable differential encoding
   - check label build before no_new_privs test
   - conditionally compile get_loaddata_common_ref()
   - fix unix socket mediation cache update, and leak"

* tag 'apparmor-pr-2026-06-22' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor: (35 commits)
  apparmor: advertise the tcp fast open fix is applied
  apparmor: mediate the implicit connect of TCP fast open sendmsg
  apparmor: fix label can not be immediately before a declaration
  apparmor: fix kernel-doc warnings
  apparmor: replace get_zeroed_page() with kzalloc()
  security: apparmor: fix two spelling mistakes
  apparmor: fix use-after-free in rawdata dedup loop
  apparmor: Fix inverted comparison in cache_hold_inc()
  apparmor: fix uninitialised pointer passed to audit_log_untrustedstring()
  apparmor: don't audit files pointing to aa_null.dentry
  apparmor: put secmark label after secid lookup
  apparmor: aa_getprocattr free procattr leak on format failure
  apparmor: remove unnecessary goto and associated label
  apparmor: release exe file resources on path failure
  apparmor: fail policy unpack on accept2 allocation failure
  apparmor: Fix return in ns_mkdir_op
  apparmor: remove or add symlinks to rawdata according to export_binary
  apparmor: fix NULL pointer dereference in unpack_pdb
  apparmor: make fn_label_build() capable of handling not supported
  apparmor: change fn_label_build() call to not return NULL
  ...

Pull input updates from Dmitry Torokhov:

 - A new driver for Wacom W9000-series penabled touchscreens

 - Updates to STM FTS driver adding support for reset line and preparing
   the driver for STMFTS5 support

 - Updates to RMI4 and IMS PCU drivers hardening the code

 - Support for half-duplex mode restored in ADS7846 driver

 - Updates to driver's device_id tables to use named initializers

 - Removal of no longer used PCAP keys and touchscreen drivers (support
   for the ezx series of phones was removed in 2022)

 - Removal of xilinx_ps2 driver which is no longer used either

 - Updates to userio to allow setting up additional serio port
   characteristics (such as id, extra and proto)

 - Assorted hardening and cleanup fixes for other drivers

* tag 'input-for-v7.2-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (72 commits)
  Input: mms114 - fix touch indexing for MMS134S and MMS136
  Input: elan_i2c - prevent division by zero and arithmetic underflow
  Input: stop force-feedback timer when unregistering input devices
  Input: iforce - bound the device-reported force-feedback effect index
  Input: goodix - clamp the device-reported contact count
  Input: mms114 - reject an oversized device packet size
  Input: touchwin - reset the packet index on every complete packet
  Input: rmi4 - update formatting in F12
  Input: rmi4 - propagate proper error code in F12 sensor tuning
  Input: rmi4 - simplify size calculations in F12
  Input: rmi4 - use sizeof(*ptr) and idiomatic checks in f12 allocators
  Input: rmi4 - use devm_kmalloc for F12 data packet buffer
  Input: rmi4 - use flexible array member for IRQ masks in F12
  Input: rmi4 - use unaligned access helpers in F12
  Input: rmi4 - change reg_size type to u32
  Input: rmi4 - refactor F12 probe function
  Input: rmi4 - use kzalloc_flex() for struct rmi_function
  Input: rmi4 - refactor function allocation and registration
  Input: rmi4 - use local presence map in rmi_read_register_desc()
  Input: rmi4 - fix limit in rmi_register_desc_has_subpacket()
  ...

I have left Sunplus and no longer have access to the relevant hardware
to test or maintain this driver. Mark the driver as orphaned.

Signed-off-by: Wells Lu <wellslutw@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260622180721.28334-1-wellslutw@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull dmaengine updates from Vinod Koul:
 "Core:
   - New devm_of_dma_controller_register() API
   - Refactor devm_dma_request_chan() API

  New Support:
   - Loongson Multi-Channel DMA controller support
   - Renesas RZ/{T2H,N2H} support
   - Dw CV1800B DMA support
   - Switchtec DMA engine driver

 U pdates:
   - Xilinx AXI dma binding conversion
   - Renesas CHCTRL register read updates
   - AMD MDB Endpoint and non-LL mode Support
   - AXI dma handling of SW and HW cyclic transfers termination
   - Intel ioatdma and idxd driver updates"

* tag 'dmaengine-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (62 commits)
  dt-bindings: dma: snps,dw-axi-dmac: Add fallback compatible for CV1800B
  MAINTAINERS: dmaengine/ti: Remove myself and add Vignesh as maintainer
  dmaengine: qcom: Unify user-visible "Qualcomm" name
  dt-bindings: dma: qcom,gpi: Document GPI DMA engine for Shikra SoC
  dmaengine: qcom: hidma: use sysfs_emit() in sysfs show callbacks
  dmaengine: dw-axi-dmac: fix PM for system sleep and channel alloc
  dmaengine: dw-axi-dmac: drop redundant DMAC enable in block start
  dmaengine: altera-msgdma: Use memcpy_toio for descriptor FIFO writes
  dt-bindings: dma: fsl-edma: add dma-channel-mask property description
  dmaengine: tegra: Fix burst size calculation
  dmaengine: iop32x-adma: Remove a leftover header file
  dmaengine: dma-axi-dmac: use DMA pool to manange DMA descriptor
  dmaengine: dma-axi-dmac: Drop struct clk from main struct
  dmaengine: dma-axi-dmac: Properly free struct axi_dmac_desc
  dmaengine: Fix possible use after free
  dmaengine: dw-edma: Add spinlock to protect DONE_INT_MASK and ABORT_INT_MASK
  dmaengine: dw-edma-pcie: Reject devices without driver data
  dmaengine: sh: rz-dmac: Add DMA ACK signal routing support
  irqchip/renesas-rzv2h: Add DMA ACK signal routing support
  dmaengine: dw-edma: Remove dw_edma_add_irq_mask()
  ...

Pull phy updates from Vinod Koul:
 "Bunch of new driver, device support in existing drivers/binding and
  few updates to existing drivers

  New Support:
   - Qualcomm Eliza QMP PHY, Eliza Synopsys eUSB2 support, Eliza PCIe
     phy support, Nord QMP UFS PHY, IPQ5210 USB3 PHY support
   - Econet EN751221 and EN7528 PCIe phy support
   - NXPs TJA1145 CAN transceiver phy support
   - TI DS125DF111 retimer phy support
   - Rockchip RK3528 usb phy support
   - TI J722S phy support
   - Axiado eMMC PHY driver
   - EyeQ5 Ethernet PHY driver
   - Generic PHY driver for Lynx 10G SerDes
   - Spacemit K3 USB2 PHY support

  Updates:
   - Tomi helping maintian zynqmp phys
   - lynx phy updates to support 25GBASER
   - Rockchip GRF for RK3568/RV1108 support
   - Qualcomm QSERDES COM v2 support"

* tag 'phy-for-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (87 commits)
  phy: rockchip: inno-usb2: Add missing clkout_ctl_phy kerneldoc
  phy: Move MODULE_DEVICE_TABLE next to the table itself
  phy: add basic support for NXPs TJA1145 CAN transceiver
  dt-bindings: phy: add support for NXPs TJA1145 CAN transceiver
  phy: freescale: phy-fsl-imx8qm-lvds-phy: Fix missing pm_runtime_disable() on probe error path
  dt-bindings: phy: qcom,qmp-usb: Add ipq5210 USB3 PHY
  dt-bindings: phy: qcom,qusb2: Document IPQ5210 compatible
  phy: freescale: phy-fsl-imx8qm-lvds-phy: Use synchronous PM runtime put in reset
  MAINTAINERS: expand Lynx 28G entry to cover Lynx 10G SerDes
  phy: lynx-10g: new driver
  dt-bindings: phy: lynx-10g: initial document
  phy: lynx-28g: improve phy_validate() procedure
  phy: lynx-28g: optimize read-modify-write operation
  phy: lynx-28g: add support for big endian register maps
  phy: lynx-28g: common probe() and remove()
  phy: lynx-28g: make lynx_28g_pll_read_configuration() callable per PLL
  phy: lynx-28g: move struct lynx_info definitions downwards
  phy: lynx-28g: provide default lynx_lane_supports_mode() implementation
  phy: lynx-28g: generalize protocol converter accessors
  phy: lynx-28g: common lynx_pll_get()
  ...

The trailing '*' means "all files in this directory, but not
subdirectories" which excluded tools/lib/python/kdoc/.  This is surely
not intended.

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260615154057.2156589-1-willy@infradead.org>