linux-toradex.git/arch/alpha/Kconfig, branch v5.5-rc7

kbuild: add CONFIG_ASM_MODVERSIONS

2019-08-21T16:14:11+00:00

Add CONFIG_ASM_MODVERSIONS. This allows to remove one if-conditional
nesting in scripts/Makefile.build.

scripts/Makefile.build is run every time Kbuild descends into a
sub-directory. So, I want to avoid $(wildcard ...) evaluation
where possible although computing $(wildcard ...) is so cheap that
it may not make measurable performance difference.

Signed-off-by: Masahiro Yamada 
Acked-by: Geert Uytterhoeven

Merge branch 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2019-05-06T20:50:15+00:00

Pull locking updates from Ingo Molnar:
 "Here are the locking changes in this cycle:

   - rwsem unification and simpler micro-optimizations to prepare for
     more intrusive (and more lucrative) scalability improvements in
     v5.3 (Waiman Long)

   - Lockdep irq state tracking flag usage cleanups (Frederic
     Weisbecker)

   - static key improvements (Jakub Kicinski, Peter Zijlstra)

   - misc updates, cleanups and smaller fixes"

* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (26 commits)
  locking/lockdep: Remove unnecessary unlikely()
  locking/static_key: Don't take sleeping locks in __static_key_slow_dec_deferred()
  locking/static_key: Factor out the fast path of static_key_slow_dec()
  locking/static_key: Add support for deferred static branches
  locking/lockdep: Test all incompatible scenarios at once in check_irq_usage()
  locking/lockdep: Avoid bogus Clang warning
  locking/lockdep: Generate LOCKF_ bit composites
  locking/lockdep: Use expanded masks on find_usage_*() functions
  locking/lockdep: Map remaining magic numbers to lock usage mask names
  locking/lockdep: Move valid_state() inside CONFIG_TRACE_IRQFLAGS && CONFIG_PROVE_LOCKING
  locking/rwsem: Prevent unneeded warning during locking selftest
  locking/rwsem: Optimize rwsem structure for uncontended lock acquisition
  locking/rwsem: Enable lock event counting
  locking/lock_events: Don't show pvqspinlock events on bare metal
  locking/lock_events: Make lock_events available for all archs & other locks
  locking/qspinlock_stat: Introduce generic lockevent_*() counting APIs
  locking/rwsem: Enhance DEBUG_RWSEMS_WARN_ON() macro
  locking/rwsem: Add debug check for __down_read*()
  locking/rwsem: Micro-optimize rwsem_try_read_lock_unqueued()
  locking/rwsem: Move rwsem internal function declarations to rwsem-xadd.h
  ...

locking/rwsem: Remove rwsem-spinlock.c & use rwsem-xadd.c for all archs

2019-04-03T12:50:52+00:00

Currently, we have two different implementation of rwsem:

 1) CONFIG_RWSEM_GENERIC_SPINLOCK (rwsem-spinlock.c)
 2) CONFIG_RWSEM_XCHGADD_ALGORITHM (rwsem-xadd.c)

As we are going to use a single generic implementation for rwsem-xadd.c
and no architecture-specific code will be needed, there is no point
in keeping two different implementations of rwsem. In most cases, the
performance of rwsem-spinlock.c will be worse. It also doesn't get all
the performance tuning and optimizations that had been implemented in
rwsem-xadd.c over the years.

For simplication, we are going to remove rwsem-spinlock.c and make all
architectures use a single implementation of rwsem - rwsem-xadd.c.

All references to RWSEM_GENERIC_SPINLOCK and RWSEM_XCHGADD_ALGORITHM
in the code are removed.

Suggested-by: Peter Zijlstra 
Signed-off-by: Waiman Long 
Signed-off-by: Peter Zijlstra (Intel) 
Acked-by: Linus Torvalds 
Cc: Andrew Morton 
Cc: Arnd Bergmann 
Cc: Borislav Petkov 
Cc: Davidlohr Bueso 
Cc: H. Peter Anvin 
Cc: Paul E. McKenney 
Cc: Thomas Gleixner 
Cc: Tim Chen 
Cc: Will Deacon 
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-c6x-dev@linux-c6x.org
Cc: linux-m68k@lists.linux-m68k.org
Cc: linux-riscv@lists.infradead.org
Cc: linux-um@lists.infradead.org
Cc: linux-xtensa@linux-xtensa.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: nios2-dev@lists.rocketboards.org
Cc: openrisc@lists.librecores.org
Cc: uclinux-h8-devel@lists.sourceforge.jp
Link: https://lkml.kernel.org/r/20190322143008.21313-3-longman@redhat.com
Signed-off-by: Ingo Molnar

arch/tlb: Clean up simple architectures

2019-04-03T08:32:54+00:00

For the architectures that do not implement their own tlb_flush() but
do already use the generic mmu_gather, there are two options:

 1) the platform has an efficient flush_tlb_range() and
    asm-generic/tlb.h doesn't need any overrides at all.

 2) the platform lacks an efficient flush_tlb_range() and
    we select MMU_GATHER_NO_RANGE to minimize full invalidates.

Convert all 'simple' architectures to one of these two forms.

alpha:	    has no range invalidate -> 2
arc:	    already used flush_tlb_range() -> 1
c6x:	    has no range invalidate -> 2
hexagon:    has an efficient flush_tlb_range() -> 1
            (flush_tlb_mm() is in fact a full range invalidate,
	     so no need to shoot down everything)
m68k:	    has inefficient flush_tlb_range() -> 2
microblaze: has no flush_tlb_range() -> 2
mips:	    has efficient flush_tlb_range() -> 1
	    (even though it currently seems to use flush_tlb_mm())
nds32:	    already uses flush_tlb_range() -> 1
nios2:	    has inefficient flush_tlb_range() -> 2
	    (no limit on range iteration)
openrisc:   has inefficient flush_tlb_range() -> 2
	    (no limit on range iteration)
parisc:	    already uses flush_tlb_range() -> 1
sparc32:    already uses flush_tlb_range() -> 1
unicore32:  has inefficient flush_tlb_range() -> 2
	    (no limit on range iteration)
xtensa:	    has efficient flush_tlb_range() -> 1

Note this also fixes a bug in the existing code for a number
platforms. Those platforms that did:

  tlb_end_vma() -> if (!full_mm) flush_tlb_*()
  tlb_flush -> if (full_mm) flush_tlb_mm()

missed the case of shift_arg_pages(), which doesn't have @fullmm set,
nor calls into tlb_*vma(), but still frees page-tables and thus needs
an invalidate. The new code handles this by detecting a non-empty
range, and either issuing the matching range invalidate or a full
invalidate, depending on the capabilities.

No change in behavior intended.

Signed-off-by: Peter Zijlstra (Intel) 
Cc: Andrew Morton 
Cc: Andy Lutomirski 
Cc: Aneesh Kumar K.V 
Cc: Borislav Petkov 
Cc: Dave Hansen 
Cc: David S. Miller 
Cc: Greentime Hu 
Cc: Guan Xuetao 
Cc: H. Peter Anvin 
Cc: Helge Deller 
Cc: Jonas Bonn 
Cc: Ley Foon Tan 
Cc: Linus Torvalds 
Cc: Mark Salter 
Cc: Max Filippov 
Cc: Michal Simek 
Cc: Nick Piggin 
Cc: Paul Burton 
Cc: Peter Zijlstra 
Cc: Richard Henderson 
Cc: Richard Kuo 
Cc: Rik van Riel 
Cc: Thomas Gleixner 
Cc: Vineet Gupta 
Cc: Will Deacon 
Signed-off-by: Ingo Molnar

Merge tag 'kconfig-v4.21-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

2018-12-29T21:40:29+00:00

Pull Kconfig file consolidation from Masahiro Yamada:
 "Consolidation of bus (PCI, PCMCIA, EISA, RapidIO) config entries by
  Christoph Hellwig.

  Currently, every architecture that wants to provide common peripheral
  busses needs to add some boilerplate code and include the right
  Kconfig files. This series instead just selects the presence (when
  needed) and then handles everything in the bus-specific Kconfig file
  under drivers/"

* tag 'kconfig-v4.21-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  pcmcia: remove per-arch PCMCIA config entry
  eisa: consolidate EISA Kconfig entry in drivers/eisa
  rapidio: consolidate RAPIDIO config entry in drivers/rapidio
  pcmcia: allow PCMCIA support independent of the architecture
  PCI: consolidate the PCI_SYSCALL symbol
  PCI: consolidate the PCI_DOMAINS and PCI_DOMAINS_GENERIC config options
  PCI: consolidate PCI config entry in drivers/pci
  MIPS: remove the HT_PCI config option

dma-mapping: always build the direct mapping code

2018-12-13T20:06:11+00:00

All architectures except for sparc64 use the dma-direct code in some
form, and even for sparc64 we had the discussion of a direct mapping
mode a while ago.  In preparation for directly calling the direct
mapping code don't bother having it optionally but always build the
code in.  This is a minor hardship for some powerpc and arm configs
that don't pull it in yet (although they should in a relase ot two),
and sparc64 which currently doesn't need it at all, but it will
reduce the ifdef mess we'd otherwise need significantly.

Signed-off-by: Christoph Hellwig 
Acked-by: Jesper Dangaard Brouer 
Tested-by: Jesper Dangaard Brouer 
Tested-by: Tony Luck

arch: switch the default on ARCH_HAS_SG_CHAIN

2018-12-06T15:04:56+00:00

These days architectures are mostly out of the business of dealing with
struct scatterlist at all, unless they have architecture specific iommu
drivers.  Replace the ARCH_HAS_SG_CHAIN symbol with a ARCH_NO_SG_CHAIN
one only enabled for architectures with horrible legacy iommu drivers
like alpha and parisc, and conditionally for arm which wants to keep it
disable for legacy platforms.

Signed-off-by: Christoph Hellwig 
Reviewed-by: Palmer Dabbelt

eisa: consolidate EISA Kconfig entry in drivers/eisa

2018-11-23T02:46:22+00:00

Let architectures opt into EISA support by selecting HAVE_EISA and
handle everything else in drivers/eisa.

Signed-off-by: Christoph Hellwig 
Acked-by: Thomas Gleixner 
Acked-by: Paul Burton 
Signed-off-by: Masahiro Yamada

pcmcia: allow PCMCIA support independent of the architecture

2018-11-23T02:46:00+00:00

There is nothing architecture specific in the PCMCIA core, so allow
building it everywhere.  The actual host controllers will depend on ISA,
PCI or a specific SOC.

Signed-off-by: Christoph Hellwig 
Acked-by: Dominik Brodowski 
Acked-by: Thomas Gleixner 
Acked-by: Paul Burton 
Signed-off-by: Masahiro Yamada

PCI: consolidate the PCI_SYSCALL symbol

2018-11-23T02:45:52+00:00

Let architectures select the syscall support instead of duplicating the
kconfig entry.

Signed-off-by: Christoph Hellwig 
Signed-off-by: Masahiro Yamada