<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux-toradex.git/arch/alpha/Makefile, branch master</title>
<subtitle>Linux kernel for Apalis and Colibri modules</subtitle>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/'/>
<entry>
<title>alpha: add self-extracting compressed kernel boot stub</title>
<updated>2026-10-17T22:44:43+00:00</updated>
<author>
<name>Matt Turner</name>
<email>mattst88@gmail.com</email>
</author>
<published>2026-10-17T16:53:34+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=c437950dceb88a92ca526f5ce3afd327c4fce457'/>
<id>c437950dceb88a92ca526f5ce3afd327c4fce457</id>
<content type='text'>
Alpha only ever supported gzip for the kernel image, and did so in a way
out of step with every other architecture: aboot, the disk boot loader,
decompresses vmlinux.gz itself with its own bundled inflate code, so
adding a compression format meant writing a new decompressor inside
aboot as well as in the kernel.

Build a proper self-extracting arch/alpha/boot/compressed/vmlinux
instead, modeled on parisc: a small ELF stub with the real, compressed
vmlinux linked in, which decompresses the kernel, relocates it into
place and jumps to its entry point. aboot needs no changes.

The stub has no sanitizer or coverage runtime and must run on any Alpha,
so it builds private copies of the arch/alpha/lib/ memory and division
routines it needs instead of linking lib.a, whose objects carry the
kernel's instrumentation and -mcpu=.

The build now emits arch/alpha/boot/vmlinuz rather than vmlinux.gz,
which was never a name aboot cared about and would be a lie for an ELF
stub: the bootpz path in the same directory still produces real gzip
data as vmlinux.nh.gz. Existing aboot.conf files name the image as it
was installed in /boot, so only the command that copies it out of the
build tree changes.

Unlike parisc and mips, the stub is linked at START_ADDR rather than at
a separate low address; see compressed/vmlinux.lds.S. It has no console
output, since bringing up the HWRPB console callbacks needs more than
the CRB dispatch the kernel proper does much later, so error() just
halts.

The legacy SRM netboot path (bootpz.c) is left alone: it has its own
boot protocol (PALcode reinitialization, self-populated ZERO_PGE,
build-time-computed image sizes) that does not fit this design without a
separate rewrite, and keeps using plain gzip via vmlinux.nh.gz.

Co-developed-by: Magnus Lindholm &lt;linmag7@gmail.com&gt;
Signed-off-by: Magnus Lindholm &lt;linmag7@gmail.com&gt;
Signed-off-by: Matt Turner &lt;mattst88@gmail.com&gt;
Reviewed-by: Magnus Lindholm &lt;linmag7@gmail.com&gt;
Tested-by: Magnus Lindholm &lt;linmag7@gmail.com&gt;
Link: https://lore.kernel.org/r/20261017-alpha-kernel-compression-v2-2-c71e6b08dc63@gmail.com
Signed-off-by: Magnus Lindholm &lt;linmag7@gmail.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Alpha only ever supported gzip for the kernel image, and did so in a way
out of step with every other architecture: aboot, the disk boot loader,
decompresses vmlinux.gz itself with its own bundled inflate code, so
adding a compression format meant writing a new decompressor inside
aboot as well as in the kernel.

Build a proper self-extracting arch/alpha/boot/compressed/vmlinux
instead, modeled on parisc: a small ELF stub with the real, compressed
vmlinux linked in, which decompresses the kernel, relocates it into
place and jumps to its entry point. aboot needs no changes.

The stub has no sanitizer or coverage runtime and must run on any Alpha,
so it builds private copies of the arch/alpha/lib/ memory and division
routines it needs instead of linking lib.a, whose objects carry the
kernel's instrumentation and -mcpu=.

The build now emits arch/alpha/boot/vmlinuz rather than vmlinux.gz,
which was never a name aboot cared about and would be a lie for an ELF
stub: the bootpz path in the same directory still produces real gzip
data as vmlinux.nh.gz. Existing aboot.conf files name the image as it
was installed in /boot, so only the command that copies it out of the
build tree changes.

Unlike parisc and mips, the stub is linked at START_ADDR rather than at
a separate low address; see compressed/vmlinux.lds.S. It has no console
output, since bringing up the HWRPB console callbacks needs more than
the CRB dispatch the kernel proper does much later, so error() just
halts.

The legacy SRM netboot path (bootpz.c) is left alone: it has its own
boot protocol (PALcode reinitialization, self-populated ZERO_PGE,
build-time-computed image sizes) that does not fit this design without a
separate rewrite, and keeps using plain gzip via vmlinux.nh.gz.

Co-developed-by: Magnus Lindholm &lt;linmag7@gmail.com&gt;
Signed-off-by: Magnus Lindholm &lt;linmag7@gmail.com&gt;
Signed-off-by: Matt Turner &lt;mattst88@gmail.com&gt;
Reviewed-by: Magnus Lindholm &lt;linmag7@gmail.com&gt;
Tested-by: Magnus Lindholm &lt;linmag7@gmail.com&gt;
Link: https://lore.kernel.org/r/20261017-alpha-kernel-compression-v2-2-c71e6b08dc63@gmail.com
Signed-off-by: Magnus Lindholm &lt;linmag7@gmail.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>alpha: pass -Wa,-mev6 only when using GNU as</title>
<updated>2026-08-11T21:29:28+00:00</updated>
<author>
<name>Matt Turner</name>
<email>mattst88@gmail.com</email>
</author>
<published>2026-08-05T18:55:57+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=89679d7908e7f09dfa45cf9fe1ab59795455d197'/>
<id>89679d7908e7f09dfa45cf9fe1ab59795455d197</id>
<content type='text'>
That flag exists to stop gas emulating instructions the assembler thinks
the target lacks.  It is a gas-only option, and LLVM's integrated
assembler does not emulate instructions in the first place, so nothing
is needed there.

Condition it on CONFIG_AS_IS_GNU rather than the compiler, so it is
still passed for clang builds using GNU as (LLVM_IAS=0) and omitted only
for the integrated assembler.

Signed-off-by: Matt Turner &lt;mattst88@gmail.com&gt;
Reviewed-by: Magnus Lindholm &lt;linmag7@gmail.com&gt;
Link: https://lore.kernel.org/r/20260805185557.3283233-1-mattst88@gmail.com
Signed-off-by: Magnus Lindholm &lt;linmag7@gmail.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
That flag exists to stop gas emulating instructions the assembler thinks
the target lacks.  It is a gas-only option, and LLVM's integrated
assembler does not emulate instructions in the first place, so nothing
is needed there.

Condition it on CONFIG_AS_IS_GNU rather than the compiler, so it is
still passed for clang builds using GNU as (LLVM_IAS=0) and omitted only
for the integrated assembler.

Signed-off-by: Matt Turner &lt;mattst88@gmail.com&gt;
Reviewed-by: Magnus Lindholm &lt;linmag7@gmail.com&gt;
Link: https://lore.kernel.org/r/20260805185557.3283233-1-mattst88@gmail.com
Signed-off-by: Magnus Lindholm &lt;linmag7@gmail.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>alpha: drop pre-EV56 support</title>
<updated>2024-05-06T10:05:00+00:00</updated>
<author>
<name>Arnd Bergmann</name>
<email>arnd@arndb.de</email>
</author>
<published>2023-12-13T17:00:54+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=a4184174be36369c3af8d937e165f28a43ef1e02'/>
<id>a4184174be36369c3af8d937e165f28a43ef1e02</id>
<content type='text'>
All EV4 machines are already gone, and the remaining EV5 based machines
all support the slightly more modern EV56 generation as well.
Debian only supports EV56 and later.

Drop both of these and build kernels optimized for EV56 and higher
when the "generic" options is selected, tuning for an out-of-order
EV6 pipeline, same as Debian userspace.

Since this was the only supported architecture without 8-bit and
16-bit stores, common kernel code no longer has to worry about
aligning struct members, and existing workarounds from the block
and tty layers can be removed.

The alpha memory management code no longer needs an abstraction
for the differences between EV4 and EV5+.

Link: https://lists.debian.org/debian-alpha/2023/05/msg00009.html
Acked-by: Paul E. McKenney &lt;paulmck@kernel.org&gt;
Acked-by: Matt Turner &lt;mattst88@gmail.com&gt;
Signed-off-by: Arnd Bergmann &lt;arnd@arndb.de&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
All EV4 machines are already gone, and the remaining EV5 based machines
all support the slightly more modern EV56 generation as well.
Debian only supports EV56 and later.

Drop both of these and build kernels optimized for EV56 and higher
when the "generic" options is selected, tuning for an out-of-order
EV6 pipeline, same as Debian userspace.

Since this was the only supported architecture without 8-bit and
16-bit stores, common kernel code no longer has to worry about
aligning struct members, and existing workarounds from the block
and tty layers can be removed.

The alpha memory management code no longer needs an abstraction
for the differences between EV4 and EV5+.

Link: https://lists.debian.org/debian-alpha/2023/05/msg00009.html
Acked-by: Paul E. McKenney &lt;paulmck@kernel.org&gt;
Acked-by: Matt Turner &lt;mattst88@gmail.com&gt;
Signed-off-by: Arnd Bergmann &lt;arnd@arndb.de&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>kbuild: remove head-y syntax</title>
<updated>2022-10-02T09:06:03+00:00</updated>
<author>
<name>Masahiro Yamada</name>
<email>masahiroy@kernel.org</email>
</author>
<published>2022-09-24T18:19:15+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=ce697ccee1a8661da4e23fbe5f3d45d8d6922c20'/>
<id>ce697ccee1a8661da4e23fbe5f3d45d8d6922c20</id>
<content type='text'>
Kbuild puts the objects listed in head-y at the head of vmlinux.
Conventionally, we do this for head*.S, which contains the kernel entry
point.

A counter approach is to control the section order by the linker script.
Actually, the code marked as __HEAD goes into the ".head.text" section,
which is placed before the normal ".text" section.

I do not know if both of them are needed. From the build system
perspective, head-y is not mandatory. If you can achieve the proper code
placement by the linker script only, it would be cleaner.

I collected the current head-y objects into head-object-list.txt. It is
a whitelist. My hope is it will be reduced in the long run.

Signed-off-by: Masahiro Yamada &lt;masahiroy@kernel.org&gt;
Tested-by: Nick Desaulniers &lt;ndesaulniers@google.com&gt;
Reviewed-by: Nicolas Schier &lt;nicolas@fjasle.eu&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Kbuild puts the objects listed in head-y at the head of vmlinux.
Conventionally, we do this for head*.S, which contains the kernel entry
point.

A counter approach is to control the section order by the linker script.
Actually, the code marked as __HEAD goes into the ".head.text" section,
which is placed before the normal ".text" section.

I do not know if both of them are needed. From the build system
perspective, head-y is not mandatory. If you can achieve the proper code
placement by the linker script only, it would be cleaner.

I collected the current head-y objects into head-object-list.txt. It is
a whitelist. My hope is it will be reduced in the long run.

Signed-off-by: Masahiro Yamada &lt;masahiroy@kernel.org&gt;
Tested-by: Nick Desaulniers &lt;ndesaulniers@google.com&gt;
Reviewed-by: Nicolas Schier &lt;nicolas@fjasle.eu&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>kbuild: use more subdir- for visiting subdirectories while cleaning</title>
<updated>2021-10-24T04:49:46+00:00</updated>
<author>
<name>Masahiro Yamada</name>
<email>masahiroy@kernel.org</email>
</author>
<published>2021-10-13T06:36:22+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=8212f8986d311ccf6a72305e6bdbd814691701d6'/>
<id>8212f8986d311ccf6a72305e6bdbd814691701d6</id>
<content type='text'>
Documentation/kbuild/makefiles.rst suggests to use "archclean" for
cleaning arch/$(SRCARCH)/boot/, but it is not a hard requirement.

Since commit d92cc4d51643 ("kbuild: require all architectures to have
arch/$(SRCARCH)/Kbuild"), we can use the "subdir- += boot" trick for
all architectures. This can take advantage of the parallel option (-j)
for "make clean".

I also cleaned up the comments in arch/$(SRCARCH)/Makefile. The "archdep"
target no longer exists.

Signed-off-by: Masahiro Yamada &lt;masahiroy@kernel.org&gt;
Reviewed-by: Kees Cook &lt;keescook@chromium.org&gt;
Acked-by: Geert Uytterhoeven &lt;geert@linux-m68k.org&gt;
Acked-by: Michael Ellerman &lt;mpe@ellerman.id.au&gt; (powerpc)
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Documentation/kbuild/makefiles.rst suggests to use "archclean" for
cleaning arch/$(SRCARCH)/boot/, but it is not a hard requirement.

Since commit d92cc4d51643 ("kbuild: require all architectures to have
arch/$(SRCARCH)/Kbuild"), we can use the "subdir- += boot" trick for
all architectures. This can take advantage of the parallel option (-j)
for "make clean".

I also cleaned up the comments in arch/$(SRCARCH)/Makefile. The "archdep"
target no longer exists.

Signed-off-by: Masahiro Yamada &lt;masahiroy@kernel.org&gt;
Reviewed-by: Kees Cook &lt;keescook@chromium.org&gt;
Acked-by: Geert Uytterhoeven &lt;geert@linux-m68k.org&gt;
Acked-by: Michael Ellerman &lt;mpe@ellerman.id.au&gt; (powerpc)
</pre>
</div>
</content>
</entry>
<entry>
<title>alpha: move core-y in arch/alpha/Makefile to arch/alpha/Kbuild</title>
<updated>2021-05-26T14:11:47+00:00</updated>
<author>
<name>Masahiro Yamada</name>
<email>masahiroy@kernel.org</email>
</author>
<published>2021-05-12T07:57:26+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=5519f498d59528dd43f4a3f65d638c1c080aa80b'/>
<id>5519f498d59528dd43f4a3f65d638c1c080aa80b</id>
<content type='text'>
Use obj-y to clean up Makefile.

Signed-off-by: Masahiro Yamada &lt;masahiroy@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Use obj-y to clean up Makefile.

Signed-off-by: Masahiro Yamada &lt;masahiroy@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>arch: alpha: Remove CONFIG_OPROFILE support</title>
<updated>2021-01-22T06:41:34+00:00</updated>
<author>
<name>Viresh Kumar</name>
<email>viresh.kumar@linaro.org</email>
</author>
<published>2021-01-14T11:35:14+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=a5644fbf4d1e92c9f1a610f7552cb95ffed5b656'/>
<id>a5644fbf4d1e92c9f1a610f7552cb95ffed5b656</id>
<content type='text'>
The "oprofile" user-space tools don't use the kernel OPROFILE support
any more, and haven't in a long time. User-space has been converted to
the perf interfaces.

Remove the old oprofile's architecture specific support.

Suggested-by: Christoph Hellwig &lt;hch@infradead.org&gt;
Suggested-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
Signed-off-by: Viresh Kumar &lt;viresh.kumar@linaro.org&gt;
Acked-by: Robert Richter &lt;rric@kernel.org&gt;
Acked-by: William Cohen &lt;wcohen@redhat.com&gt;
Acked-by: Al Viro &lt;viro@zeniv.linux.org.uk&gt;
Acked-by: Thomas Gleixner &lt;tglx@linutronix.de&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The "oprofile" user-space tools don't use the kernel OPROFILE support
any more, and haven't in a long time. User-space has been converted to
the perf interfaces.

Remove the old oprofile's architecture specific support.

Suggested-by: Christoph Hellwig &lt;hch@infradead.org&gt;
Suggested-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
Signed-off-by: Viresh Kumar &lt;viresh.kumar@linaro.org&gt;
Acked-by: Robert Richter &lt;rric@kernel.org&gt;
Acked-by: William Cohen &lt;wcohen@redhat.com&gt;
Acked-by: Al Viro &lt;viro@zeniv.linux.org.uk&gt;
Acked-by: Thomas Gleixner &lt;tglx@linutronix.de&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>kconfig: make arch/*/configs/defconfig the default of KBUILD_DEFCONFIG</title>
<updated>2019-06-09T06:08:18+00:00</updated>
<author>
<name>Masahiro Yamada</name>
<email>yamada.masahiro@socionext.com</email>
</author>
<published>2019-05-27T14:37:24+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=bd305f259cd33f6cd550e479d0a0a856cd8b7941'/>
<id>bd305f259cd33f6cd550e479d0a0a856cd8b7941</id>
<content type='text'>
Until recently, if KBUILD_DEFCONFIG was not set by the arch Makefile,
the default path arch/*/defconfig was used.

The last users of the default are gone by the following commits:

- Commit f3e20ad67b4c ("s390: move arch/s390/defconfig to
  arch/s390/configs/defconfig")

- Commit 986a13769c4b ("alpha: move arch/alpha/defconfig to
  arch/alpha/configs/defconfig")

Let's set arch/*/configs/defconfig as a new default. This saves
KBUILD_DEFCONFIG for some architectures.

Signed-off-by: Masahiro Yamada &lt;yamada.masahiro@socionext.com&gt;
Acked-by: Catalin Marinas &lt;catalin.marinas@arm.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Until recently, if KBUILD_DEFCONFIG was not set by the arch Makefile,
the default path arch/*/defconfig was used.

The last users of the default are gone by the following commits:

- Commit f3e20ad67b4c ("s390: move arch/s390/defconfig to
  arch/s390/configs/defconfig")

- Commit 986a13769c4b ("alpha: move arch/alpha/defconfig to
  arch/alpha/configs/defconfig")

Let's set arch/*/configs/defconfig as a new default. This saves
KBUILD_DEFCONFIG for some architectures.

Signed-off-by: Masahiro Yamada &lt;yamada.masahiro@socionext.com&gt;
Acked-by: Catalin Marinas &lt;catalin.marinas@arm.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>alpha: move arch/alpha/defconfig to arch/alpha/configs/defconfig</title>
<updated>2019-05-18T02:49:55+00:00</updated>
<author>
<name>Masahiro Yamada</name>
<email>yamada.masahiro@socionext.com</email>
</author>
<published>2019-05-13T02:14:05+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=986a13769c4bd00f1b894b08af2f1068f88d3d5e'/>
<id>986a13769c4bd00f1b894b08af2f1068f88d3d5e</id>
<content type='text'>
As of Linux 5.1, alpha and s390 are the last architectures that
have defconfig in arch/*/ instead of arch/*/configs/.

  $ find arch -name defconfig | sort
  arch/alpha/defconfig
  arch/arm64/configs/defconfig
  arch/csky/configs/defconfig
  arch/nds32/configs/defconfig
  arch/riscv/configs/defconfig
  arch/s390/defconfig

The arch/$(ARCH)/defconfig is the hard-coded default in Kconfig,
and I want to deprecate it after evacuating the remaining defconfig
into the standard location, arch/*/configs/.

Define KBUILD_DEFCONFIG like other architectures, and move defconfig
into the configs/ subdirectory.

Signed-off-by: Masahiro Yamada &lt;yamada.masahiro@socionext.com&gt;
Reviewed-by: Paul Walmsley &lt;paul@pwsan.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
As of Linux 5.1, alpha and s390 are the last architectures that
have defconfig in arch/*/ instead of arch/*/configs/.

  $ find arch -name defconfig | sort
  arch/alpha/defconfig
  arch/arm64/configs/defconfig
  arch/csky/configs/defconfig
  arch/nds32/configs/defconfig
  arch/riscv/configs/defconfig
  arch/s390/defconfig

The arch/$(ARCH)/defconfig is the hard-coded default in Kconfig,
and I want to deprecate it after evacuating the remaining defconfig
into the standard location, arch/*/configs/.

Define KBUILD_DEFCONFIG like other architectures, and move defconfig
into the configs/ subdirectory.

Signed-off-by: Masahiro Yamada &lt;yamada.masahiro@socionext.com&gt;
Reviewed-by: Paul Walmsley &lt;paul@pwsan.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>alpha: generate uapi header and syscall table header files</title>
<updated>2018-12-21T16:57:56+00:00</updated>
<author>
<name>Firoz Khan</name>
<email>firoz.khan@linaro.org</email>
</author>
<published>2018-11-13T09:31:53+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=a8faab540f0ab2a03afd12e361d3c6e463226fae'/>
<id>a8faab540f0ab2a03afd12e361d3c6e463226fae</id>
<content type='text'>
System call table generation script must be run to gener-
ate unistd_32.h and syscall_table.h files. This patch will
have changes which will invokes the script.

This patch will generate unistd_32.h and syscall_table.h
files by the syscall table generation script invoked by
alpha/Makefile and the generated files against the removed
files must be identical.

The generated uapi header file will be included in uapi/-
asm/unistd.h and generated system call table header file
will be included by kernel/systbls.S file.

Signed-off-by: Firoz Khan &lt;firoz.khan@linaro.org&gt;
Signed-off-by: Matt Turner &lt;mattst88@gmail.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
System call table generation script must be run to gener-
ate unistd_32.h and syscall_table.h files. This patch will
have changes which will invokes the script.

This patch will generate unistd_32.h and syscall_table.h
files by the syscall table generation script invoked by
alpha/Makefile and the generated files against the removed
files must be identical.

The generated uapi header file will be included in uapi/-
asm/unistd.h and generated system call table header file
will be included by kernel/systbls.S file.

Signed-off-by: Firoz Khan &lt;firoz.khan@linaro.org&gt;
Signed-off-by: Matt Turner &lt;mattst88@gmail.com&gt;
</pre>
</div>
</content>
</entry>
</feed>
