linux-toradex.git/arch/alpha/include, branch v3.0.16

Fix node_start/end_pfn() definition for mm/page_cgroup.c

2011-06-27T21:13:09+00:00

commit 21a3c96 uses node_start/end_pfn(nid) for detection start/end
of nodes. But, it's not defined in linux/mmzone.h but defined in
/arch/???/include/mmzone.h which is included only under
CONFIG_NEED_MULTIPLE_NODES=y.

Then, we see
  mm/page_cgroup.c: In function 'page_cgroup_init':
  mm/page_cgroup.c:308: error: implicit declaration of function 'node_start_pfn'
  mm/page_cgroup.c:309: error: implicit declaration of function 'node_end_pfn'

So, fixiing page_cgroup.c is an idea...

But node_start_pfn()/node_end_pfn() is a very generic macro and
should be implemented in the same manner for all archs.
(m32r has different implementation...)

This patch removes definitions of node_start/end_pfn() in each archs
and defines a unified one in linux/mmzone.h. It's not under
CONFIG_NEED_MULTIPLE_NODES, now.

A result of macro expansion is here (mm/page_cgroup.c)

for !NUMA
 start_pfn = ((&contig_page_data)->node_start_pfn);
  end_pfn = ({ pg_data_t *__pgdat = (&contig_page_data); __pgdat->node_start_pfn + __pgdat->node_spanned_pages;});

for NUMA (x86-64)
  start_pfn = ((node_data[nid])->node_start_pfn);
  end_pfn = ({ pg_data_t *__pgdat = (node_data[nid]); __pgdat->node_start_pfn + __pgdat->node_spanned_pages;});

Changelog:
 - fixed to avoid using "nid" twice in node_end_pfn() macro.

Reported-and-acked-by: Randy Dunlap 
Reported-and-tested-by: Ingo Molnar 
Acked-by: Mel Gorman 
Signed-off-by: KAMEZAWA Hiroyuki 
Signed-off-by: Linus Torvalds

ns: Wire up the setns system call

2011-05-28T17:48:39+00:00

32bit and 64bit on x86 are tested and working.  The rest I have looked
at closely and I can't find any problems.

setns is an easy system call to wire up.  It just takes two ints so I
don't expect any weird architecture porting problems.

While doing this I have noticed that we have some architectures that are
very slow to get new system calls.  cris seems to be the slowest where
the last system calls wired up were preadv and pwritev.  avr32 is weird
in that recvmmsg was wired up but never declared in unistd.h.  frv is
behind with perf_event_open being the last syscall wired up.  On h8300
the last system call wired up was epoll_wait.  On m32r the last system
call wired up was fallocate.  mn10300 has recvmmsg as the last system
call wired up.  The rest seem to at least have syncfs wired up which was
new in the 2.6.39.

v2: Most of the architecture support added by Daniel Lezcano 
v3: ported to v2.6.36-rc4 by: Eric W. Biederman 
v4: Moved wiring up of the system call to another patch
v5: ported to v2.6.39-rc6
v6: rebased onto parisc-next and net-next to avoid syscall  conflicts.
v7: ported to Linus's latest post 2.6.39 tree.

>  arch/blackfin/include/asm/unistd.h     |    3 ++-
>  arch/blackfin/mach-common/entry.S      |    1 +
Acked-by: Mike Frysinger 

Oh - ia64 wiring looks good.
Acked-by: Tony Luck 

Signed-off-by: Eric W. Biederman 
Signed-off-by: Linus Torvalds

Remove unused PROC_CHANGE_PENALTY constant

2011-05-25T15:39:43+00:00

This constant hasn't been used since before the git era (2.6.12) and thus
can be dropped.

Signed-off-by: Stephen Boyd 
Cc: Russell King 
Cc: Richard Weinberger 
Cc: Hirokazu Takata 
Cc: Kyle McMartin 
Cc: Richard Henderson 
Cc: Ivan Kokshaysky 
Cc: Matt Turner 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

alpha: hook up gpiolib support

2011-05-25T15:39:38+00:00

Allow people to use gpiolib on Alpha if they want to, mostly for build
coverage.  The header is a stright copy of that for Microblaze, which in
turn was taken from PowerPC.

[akpm@linux-foundation.org: define GENERIC_GPIO]
Signed-off-by: Mark Brown 
Cc: Richard Henderson 
Cc: Ivan Kokshaysky 
Cc: Matt Turner 
Acked-by: Grant Likely 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

alpha: Wire up syscalls new to 2.6.39

2011-05-13T23:16:11+00:00

Wire up the syscalls:
   name_to_handle_at
   open_by_handle_at
   clock_adjtime
   syncfs
and adjust some whitespace in the neighbourhood to align commments.

Signed-off-by: Michael Cree 
Signed-off-by: Matt Turner

Fix common misspellings

2011-03-31T14:26:23+00:00

Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi

remove dma64_addr_t

2011-03-24T02:47:18+00:00

There is no user now.

Signed-off-by: FUJITA Tomonori 
Cc: David Miller 
Cc: Ralf Baechle 
Cc: Richard Henderson 
Cc: Ivan Kokshaysky 
Cc: Matt Turner 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

bitops: remove minix bitops from asm/bitops.h

2011-03-24T02:46:22+00:00

minix bit operations are only used by minix filesystem and useless by
other modules.  Because byte order of inode and block bitmaps is different
on each architecture like below:

m68k:
	big-endian 16bit indexed bitmaps

h8300, microblaze, s390, sparc, m68knommu:
	big-endian 32 or 64bit indexed bitmaps

m32r, mips, sh, xtensa:
	big-endian 32 or 64bit indexed bitmaps for big-endian mode
	little-endian bitmaps for little-endian mode

Others:
	little-endian bitmaps

In order to move minix bit operations from asm/bitops.h to architecture
independent code in minix filesystem, this provides two config options.

CONFIG_MINIX_FS_BIG_ENDIAN_16BIT_INDEXED is only selected by m68k.
CONFIG_MINIX_FS_NATIVE_ENDIAN is selected by the architectures which use
native byte order bitmaps (h8300, microblaze, s390, sparc, m68knommu,
m32r, mips, sh, xtensa).  The architectures which always use little-endian
bitmaps do not select these options.

Finally, we can remove minix bit operations from asm/bitops.h for all
architectures.

Signed-off-by: Akinobu Mita 
Acked-by: Arnd Bergmann 
Acked-by: Greg Ungerer 
Cc: Geert Uytterhoeven 
Cc: Roman Zippel 
Cc: Andreas Schwab 
Cc: Martin Schwidefsky 
Cc: Heiko Carstens 
Cc: Yoshinori Sato 
Cc: Michal Simek 
Cc: "David S. Miller" 
Cc: Hirokazu Takata 
Acked-by: Ralf Baechle 
Acked-by: Paul Mundt 
Cc: Chris Zankel 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

bitops: remove ext2 non-atomic bitops from asm/bitops.h

2011-03-24T02:46:21+00:00

As the result of conversions, there are no users of ext2 non-atomic bit
operations except for ext2 filesystem itself.  Now we can put them into
architecture independent code in ext2 filesystem, and remove from
asm/bitops.h for all architectures.

Signed-off-by: Akinobu Mita 
Cc: Jan Kara 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

bitops: introduce little-endian bitops for most architectures

2011-03-24T02:46:15+00:00

Introduce little-endian bit operations to the big-endian architectures
which do not have native little-endian bit operations and the
little-endian architectures.  (alpha, avr32, blackfin, cris, frv, h8300,
ia64, m32r, mips, mn10300, parisc, sh, sparc, tile, x86, xtensa)

These architectures can just include generic implementation
(asm-generic/bitops/le.h).

Signed-off-by: Akinobu Mita 
Cc: Richard Henderson 
Cc: Ivan Kokshaysky 
Cc: Mikael Starvik 
Cc: David Howells 
Cc: Yoshinori Sato 
Cc: "Luck, Tony" 
Cc: Ralf Baechle 
Cc: Kyle McMartin 
Cc: Matthew Wilcox 
Cc: Grant Grundler 
Cc: Paul Mundt 
Cc: Kazumoto Kojima 
Cc: Hirokazu Takata 
Cc: "David S. Miller" 
Cc: Chris Zankel 
Cc: Ingo Molnar 
Cc: Thomas Gleixner 
Acked-by: Hans-Christian Egtvedt 
Acked-by: "H. Peter Anvin" 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds