linux-toradex.git/arch/arc/mm/cache.c, branch v4.10

ARC: Revert "ARC: mm: IOC: Don't enable IOC by default"

2017-01-19T03:21:06+00:00

The programming model has been fixed with prev patches so re-enable it
by default

This reverts commit 23cb1f644019bac49d87b4dd7c1eac0569cc4f53.

Signed-off-by: Vineet Gupta

ARC: mm: split arc_cache_init to allow __init reaping of bulk

2017-01-19T03:21:02+00:00

arc_cache_init() is called for each core so can't be tagged __init.
However bulk of it is only executed by master core and thus is candidate
for __init reaping.

So split it up to allow that.

Signed-off-by: Vineet Gupta

ARCv2: IOC: Use actual memory size to setup aperture size

2017-01-18T22:52:43+00:00

vs. fixed 512M before.

But this still assumes that all of memory is under IOC which may not be
true for the SoC. Improve that later when this becomes a real issue, by
specifying this from DT.

Signed-off-by: Vineet Gupta

ARCv2: IOC: Adhere to progamming model guidelines to avoid DMA corruption

2017-01-18T22:48:33+00:00

On AXS103 release bitfiles, DMA data corruptions were seen because IOC
setup was not following the recommended way in documentation.

Flipping IOC on when caches are enabled or coherency transactions are in
flight, might cause some of the memory operations to not observe
coherency as expected.

So strictly follow the programming model recommendations as documented
in comment header above arc_ioc_setup()

Signed-off-by: Vineet Gupta

ARCv2: IOC: refactor the IOC and SLC operations into own functions

2017-01-18T22:35:10+00:00

 - Move IOC setup into arc_ioc_setup()
 - Move SLC disabling into arc_slc_disable()

Signed-off-by: Vineet Gupta

ARC: mmu: clarify the MMUv3 programming model

2017-01-05T01:12:09+00:00

Signed-off-by: Vineet Gupta

ARC: mm: arc700: Don't assume 2 colours for aliasing VIPT dcache

2016-12-19T19:55:17+00:00

An ARC700 customer reported linux boot crashes when upgrading to bigger
L1 dcache (64K from 32K). Turns out they had an aliasing VIPT config and
current code only assumed 2 colours, while theirs had 4. So default to 4
colours and complain if there are fewer. Ideally this needs to be a
Kconfig option, but heck that's too much of hassle for a single user.

Cc: stable@vger.kernel.org
Signed-off-by: Vineet Gupta

ARC: mm: No need to save cache version in @cpuinfo

2016-12-19T19:54:41+00:00

Historical MMU revisions have been paired with Cache revision updates
which are captured in MMU and Cache Build Configuration Registers respectively.

This was used in boot code to check for configurations mismatches,
speically in simulations (such as running with non existent caches,
non pairing MMU and Cache version etc). This can instead be inferred
from other cache params such as line size. So remove @ver from post
processed @cpuinfo which could be used later to save soem other
interesting info.

Signed-off-by: Vineet Gupta

ARC: mm: IOC: Don't enable IOC by default

2016-11-28T17:18:36+00:00

Signed-off-by: Vineet Gupta

ARCv2: boot log: print IOC exists as well as enabled status

2016-10-28T17:06:48+00:00

Previously we would not print the case when IOC existed but was not
enabled.

And while at it, reduce one line off boot printing by consolidating
the Peripheral address space and IO-Coherency which in a way
applies to them

Signed-off-by: Vineet Gupta