Pull arm-soc: soc specific changes (part 2) from Olof Johansson:
 "This adds support for the spear13xx platform, which has first been
  under review a long time ago and finally been completed after generic
  spear work has gone into the clock, dt and pinctrl branches.

  Also a number of updates for the samsung socs are part of this branch."

Fix up trivial conflicts in drivers/gpio/gpio-samsung.c that look much
worse than they are: the exonys5 init code was refactored in commit
fd454997d687 ("gpio: samsung: refactor gpiolib init for exynos4/5"), and
then commit f10590c9836c ("ARM: EXYNOS: add GPC4 bank instance") added a
new gpio chip define and did tiny updates to the init code.

So the conflict diff looks like hell, but it's actually a fairly simple
change.

* tag 'soc2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (34 commits)
  ARM: exynos: fix building with CONFIG_OF disabled
  ARM: EXYNOS: Add AUXDATA for i2c controllers
  ARM: dts: Update device tree source files for EXYNOS5250
  ARM: EXYNOS: Add device tree support for interrupt combiner
  ARM: EXYNOS: Add irq_domain support for interrupt combiner
  ARM: EXYNOS: Remove a new bus_type instance for EXYNOS5
  ARM: EXYNOS: update irqs for EXYNOS5250 SoC
  ARM: EXYNOS: Add pre-divider and fout mux clocks for bpll and mpll
  ARM: EXYNOS: add GPC4 bank instance
  ARM: EXYNOS: Redefine IRQ_MCT_L0,1 definition
  ARM: EXYNOS: Modify the GIC physical address for static io-mapping
  ARM: EXYNOS: Add watchdog timer clock instance
  pinctrl: SPEAr1310: Fix pin numbers for clcd_high_res
  SPEAr: Update MAINTAINERS and Documentation
  SPEAr13xx: Add defconfig
  SPEAr13xx: Add compilation support
  SPEAr13xx: Add dts and dtsi files
  pinctrl: Add SPEAr13xx pinctrl drivers
  pinctrl: SPEAr: Create macro for declaring GPIO PINS
  SPEAr13xx: Add common clock framework support
  ...

Pull arm-soc cleanups (part 2) from Olof Johansson:
 "More cleanups, continuing an earlier set with omap and samsung
  specific cleanups.  These could not go into the first set because they
  have dependencies on various other series that in turn depend on the
  first cleanups."

Fixed up conflicts in arch/arm/plat-omap/counter_32k.c due to commit
bd0493eaaf5c: "move read_{boot,persistent}_clock to the architecture
level" that changed how the persistent clocks were handled.  And trivial
conflicts in arch/arm/mach-omap1/common.h due to just independent
changes close to each other.

* tag 'cleanup2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (35 commits)
  ARM: SAMSUNG: merge plat-s5p into plat-samsung
  ARM: SAMSUNG: move options for common s5p into plat-samsung/Kconfig
  ARM: SAMSUNG: move setup code for s5p mfc and mipiphy into plat-samsung
  ARM: SAMSUNG: move platform device for s5p uart into plat-samsung
  ARM: SAMSUNG: move hr timer for common s5p into plat-samsung
  ARM: SAMSUNG: move pm part for common s5p into plat-samsung
  ARM: SAMSUNG: move interrupt part for common s5p into plat-samsung
  ARM: SAMSUNG: move clock part for common s5p into plat-samsung
  ARM: S3C24XX: Use common macro to define resources on dev-uart.c
  ARM: S3C24XX: move common clock init into common.c
  ARM: S3C24XX: move common power-management code to mach-s3c24xx
  ARM: S3C24XX: move plat-s3c24xx/dev-uart.c into common.c
  ARM: S3C24XX: move plat-s3c24xx/cpu.c
  ARM: OMAP2+: Kconfig: convert SOC_OMAPAM33XX to SOC_AM33XX
  ARM: OMAP2+: Kconfig: convert SOC_OMAPTI81XX to SOC_TI81XX
  GPMC: add ECC control definitions
  ARM: OMAP2+: dmtimer: remove redundant sysconfig context restore
  ARM: OMAP: AM35xx: convert 3517 detection/flags to AM35xx
  ARM: OMAP: AM35xx: remove redunant cpu_is checks for AM3505
  ARM: OMAP1: Pass dma request lines in platform data to MMC driver
  ...

Pull first batch of arm-soc cleanups from Olof Johansson:
 "These cleanups are basically all over the place.  The idea is to
  collect changes with minimal impact but large number of changes so we
  can avoid them from distracting in the diffstat in the other series.

  A significant number of lines get removed here, in particular because
  the ixp2000 and ixp23xx platforms get removed.  These have never been
  extremely popular and have fallen into disuse over time with no active
  maintainer taking care of them.  The u5500 soc never made it into a
  product, so we are removing it from the ux500 platform.

  Many good cleanups also went into the at91 and omap platforms, as has
  been the case for a number of releases."

Trivial modify-delete conflicts in arch/arm/mach-{ixp2000,ixp23xx}

* tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (152 commits)
  ARM: clps711x: Cleanup IRQ handling
  ARM clps711x: Removed unused header mach/time.h
  ARM: clps711x: Added note about support EP731x CPU to Kconfig
  ARM: clps711x: Added missing register definitions
  ARM: clps711x: Used own subarch directory for store header file
  Dove: Fix Section mismatch warnings
  ARM: orion5x: ts78xx debugging changes
  ARM: orion5x: remove PM dependency from ts78xx
  ARM: orion5x: ts78xx fix NAND resource off by one
  ARM: orion5x: ts78xx whitespace cleanups
  Orion5x: Fix Section mismatch warnings
  Orion5x: Fix warning: struct pci_dev declared inside paramter list
  ARM: clps711x: Combine header files into one for clps711x-targets
  ARM: S3C24XX: Use common macro to define resources on mach-qt2410.c
  ARM: S3C24XX: Use common macro to define resources on mach-osiris.c
  ARM: EXYNOS: Adapt to cpuidle core time keeping and irq enable
  ARM: S5PV210: Use common macro to define resources on mach-smdkv210.c
  ARM: S5PV210: Use common macro to define resources on dev-audio.c
  ARM: S5PC100: Use common macro to define resources on dev-audio.c
  ARM: S5P64X0: Use common macro to define resources on dev-audio.c
  ...

Pull smp hotplug cleanups from Thomas Gleixner:
 "This series is merily a cleanup of code copied around in arch/* and
  not changing any of the real cpu hotplug horrors yet.  I wish I'd had
  something more substantial for 3.5, but I underestimated the lurking
  horror..."

Fix up trivial conflicts in arch/{arm,sparc,x86}/Kconfig and
arch/sparc/include/asm/thread_info_32.h

* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (79 commits)
  um: Remove leftover declaration of alloc_task_struct_node()
  task_allocator: Use config switches instead of magic defines
  sparc: Use common threadinfo allocator
  score: Use common threadinfo allocator
  sh-use-common-threadinfo-allocator
  mn10300: Use common threadinfo allocator
  powerpc: Use common threadinfo allocator
  mips: Use common threadinfo allocator
  hexagon: Use common threadinfo allocator
  m32r: Use common threadinfo allocator
  frv: Use common threadinfo allocator
  cris: Use common threadinfo allocator
  x86: Use common threadinfo allocator
  c6x: Use common threadinfo allocator
  fork: Provide kmemcache based thread_info allocator
  tile: Use common threadinfo allocator
  fork: Provide weak arch_release_[task_struct|thread_info] functions
  fork: Move thread info gfp flags to header
  fork: Remove the weak insanity
  sh: Remove cpu_idle_wait()
  ...

Kukjin Kim <kgene.kim@samsung.com> writes:
  We can remove plat-s5p directory with this series and I think, the
  plat-s3c24xx can be removed next time for one plat-samsung of Samsung
  stuff.
  Note, this is including cleanup-samsung-iommu which is removing s5p
  iommu stuff in plat-s5p.

* 'next/cleanup-plat-s3c24xx-s5p' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: SAMSUNG: merge plat-s5p into plat-samsung
  ARM: SAMSUNG: move options for common s5p into plat-samsung/Kconfig
  ARM: SAMSUNG: move setup code for s5p mfc and mipiphy into plat-samsung
  ARM: SAMSUNG: move platform device for s5p uart into plat-samsung
  ARM: SAMSUNG: move hr timer for common s5p into plat-samsung
  ARM: SAMSUNG: move pm part for common s5p into plat-samsung
  ARM: SAMSUNG: move interrupt part for common s5p into plat-samsung
  ARM: SAMSUNG: move clock part for common s5p into plat-samsung
  ARM: S3C24XX: Use common macro to define resources on dev-uart.c
  ARM: S3C24XX: move common clock init into common.c
  ARM: S3C24XX: move common power-management code to mach-s3c24xx
  ARM: S3C24XX: move plat-s3c24xx/dev-uart.c into common.c
  ARM: S3C24XX: move plat-s3c24xx/cpu.c

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>

Since just plat-samsung can support all of Samsung stuff so
that there is no more need to keep the plat-s5p for S5P SoCs.

Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

All OMAP2PLUS arch based machines makes use of mach-omap2 directory.
So just add one entry so that there is no need to patch this file
for any OMAP2+ devices.

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>

Same code. Use the generic version. The special Makefile treatment is
pointless anyway as init_task.o contains only data which is handled by
the linker script. So no point on being treated like head text.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Russell King <linux@arm.linux.org.uk>
Link: http://lkml.kernel.org/r/20120503085034.221811388@linutronix.de