linux-toradex.git/arch/arm/boot/dts/Makefile, branch v5.0 Linux kernel for Apalis and Colibri modules Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc 2019-01-05T19:30:37+00:00 Linus Torvalds torvalds@linux-foundation.org 2019-01-05T19:30:37+00:00 b23b0ea3708c3dec599966fc856836aca48835b9 Pull more ARM SoC updates from Olof Johansson: "A few updates that we merged late but are low risk for regressions for other platforms (and a few other straggling patches): - I mis-tagged the 'drivers' branch, and missed 3 patches. Merged in here. They're for a driver for the PL353 SRAM controller and a build fix for the qualcomm scm driver. - A new platform, RDA Micro RDA8810PL (Cortex-A5 w/ integrated Vivante GPU, 256MB RAM, Wifi). This includes some acked platform-specific drivers (serial, etc). This also include DTs for two boards with this SoC, OrangePi 2G and OrangePi i86. - i.MX8 is another new platform (NXP, 4x Cortex-A53 + Cortex-M4, 4K video playback offload). This is the first i.MX 64-bit SoC. - Some minor updates to Samsung boards (adding a few peripherals in DTs). - Small rework for SMP bootup on STi platforms. - A couple of TEE driver fixes. - A couple of new config options (bcm2835 thermal, Uniphier MDMAC) enabled in defconfigs" * tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (27 commits) ARM: multi_v7_defconfig: enable CONFIG_UNIPHIER_MDMAC arm64: defconfig: Re-enable bcm2835-thermal driver MAINTAINERS: Add entry for RDA Micro SoC architecture tty: serial: Add RDA8810PL UART driver ARM: dts: rda8810pl: Add interrupt support for UART dt-bindings: serial: Document RDA Micro UART ARM: dts: rda8810pl: Add timer support ARM: dts: Add devicetree for OrangePi i96 board ARM: dts: Add devicetree for OrangePi 2G IoT board ARM: dts: Add devicetree for RDA8810PL SoC ARM: Prepare RDA8810PL SoC dt-bindings: arm: Document RDA8810PL and reference boards dt-bindings: Add RDA Micro vendor prefix ARM: sti: remove pen_release and boot_lock arm64: dts: exynos: Add Bluetooth chip to TM2(e) boards arm64: dts: imx8mq-evk: enable watchdog arm64: dts: imx8mq: add watchdog devices MAINTAINERS: add i.MX8 DT path to i.MX architecture arm64: add support for i.MX8M EVK board arm64: add basic DTS for i.MX8MQ ... 
Pull more ARM SoC updates from Olof Johansson:
 "A few updates that we merged late but are low risk for regressions for
  other platforms (and a few other straggling patches):

   - I mis-tagged the 'drivers' branch, and missed 3 patches. Merged in
     here. They're for a driver for the PL353 SRAM controller and a
     build fix for the qualcomm scm driver.

   - A new platform, RDA Micro RDA8810PL (Cortex-A5 w/ integrated
     Vivante GPU, 256MB RAM, Wifi). This includes some acked
     platform-specific drivers (serial, etc). This also include DTs for
     two boards with this SoC, OrangePi 2G and OrangePi i86.

   - i.MX8 is another new platform (NXP, 4x Cortex-A53 + Cortex-M4, 4K
     video playback offload). This is the first i.MX 64-bit SoC.

   - Some minor updates to Samsung boards (adding a few peripherals in
     DTs).

   - Small rework for SMP bootup on STi platforms.

   - A couple of TEE driver fixes.

   - A couple of new config options (bcm2835 thermal, Uniphier MDMAC)
     enabled in defconfigs"

* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (27 commits)
  ARM: multi_v7_defconfig: enable CONFIG_UNIPHIER_MDMAC
  arm64: defconfig: Re-enable bcm2835-thermal driver
  MAINTAINERS: Add entry for RDA Micro SoC architecture
  tty: serial: Add RDA8810PL UART driver
  ARM: dts: rda8810pl: Add interrupt support for UART
  dt-bindings: serial: Document RDA Micro UART
  ARM: dts: rda8810pl: Add timer support
  ARM: dts: Add devicetree for OrangePi i96 board
  ARM: dts: Add devicetree for OrangePi 2G IoT board
  ARM: dts: Add devicetree for RDA8810PL SoC
  ARM: Prepare RDA8810PL SoC
  dt-bindings: arm: Document RDA8810PL and reference boards
  dt-bindings: Add RDA Micro vendor prefix
  ARM: sti: remove pen_release and boot_lock
  arm64: dts: exynos: Add Bluetooth chip to TM2(e) boards
  arm64: dts: imx8mq-evk: enable watchdog
  arm64: dts: imx8mq: add watchdog devices
  MAINTAINERS: add i.MX8 DT path to i.MX architecture
  arm64: add support for i.MX8M EVK board
  arm64: add basic DTS for i.MX8MQ
  ...
ARM: dts: Add devicetree for OrangePi i96 board 2018-12-31T21:09:46+00:00 Manivannan Sadhasivam manivannan.sadhasivam@linaro.org 2018-12-18T15:02:33+00:00 7581d836bdbe2533e732f3bceb97a89d4f81de7b Add initial devicetree for Orange Pi i96 board from Xunlong. It is one of the 96Boards IoT Edition board. Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Olof Johansson <olof@lixom.net> 
Add initial devicetree for Orange Pi i96 board from Xunlong. It
is one of the 96Boards IoT Edition board.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
ARM: dts: Add devicetree for OrangePi 2G IoT board 2018-12-31T21:09:44+00:00 Manivannan Sadhasivam manivannan.sadhasivam@linaro.org 2018-12-18T15:02:32+00:00 f0d319d26ea60f9dceaf00051b5876de039e49ca Add initial devicetree support for OrangePi 2G IoT board from Xunlong. Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Olof Johansson <olof@lixom.net> 
Add initial devicetree support for OrangePi 2G IoT board from Xunlong.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
Merge tag 'sunxi-h3-h5-for-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt 2018-12-12T21:59:58+00:00 Olof Johansson olof@lixom.net 2018-12-12T21:59:58+00:00 69c5f266d8808cd507a12b2c7c9ed7fc678c6487 Allwinner H3/H5 changes for 4.21 Our usual pull request with the changes shared between the H3 and H5 SoCs. The major changes for this release are: - Addition of the video engine for the H5 - H3 Camera support - New board: Emlid Neutis N5, Mapleboard MP130 * tag 'sunxi-h3-h5-for-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: dts: allwinner: h5: Add Video Engine node ARM/arm64: dts: allwinner: Move H3/H5 syscon label over to soc-specific nodes arm64: dts: allwinner: h5: Add system-control node with SRAM C1 ARM: dts: sun8i: h3: Fix the system-control register range ARM: dts: sun8i: Add the H3/H5 CSI controller ARM: dts: sun8i-h3: Add dts for the Mapleboard MP130 arm64: dts: allwinner: new board - Emlid Neutis N5 dt-bindings: vendor-prefix: new vendor - Emlid ARM: dts: sun8i-h3: add sy8106a to orange pi plus Signed-off-by: Olof Johansson <olof@lixom.net> 
Allwinner H3/H5 changes for 4.21

Our usual pull request with the changes shared between the H3 and H5 SoCs.

The major changes for this release are:
  - Addition of the video engine for the H5
  - H3 Camera support
  - New board: Emlid Neutis N5, Mapleboard MP130

* tag 'sunxi-h3-h5-for-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  arm64: dts: allwinner: h5: Add Video Engine node
  ARM/arm64: dts: allwinner: Move H3/H5 syscon label over to soc-specific nodes
  arm64: dts: allwinner: h5: Add system-control node with SRAM C1
  ARM: dts: sun8i: h3: Fix the system-control register range
  ARM: dts: sun8i: Add the H3/H5 CSI controller
  ARM: dts: sun8i-h3: Add dts for the Mapleboard MP130
  arm64: dts: allwinner: new board - Emlid Neutis N5
  dt-bindings: vendor-prefix: new vendor - Emlid
  ARM: dts: sun8i-h3: add sy8106a to orange pi plus

Signed-off-by: Olof Johansson <olof@lixom.net>
Merge tag 'v4.21-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt 2018-12-12T21:06:47+00:00 Olof Johansson olof@lixom.net 2018-12-12T21:06:47+00:00 33afb48f32e56700ca77d7d345555927d205d6af RV1108 improvements (uart-dma, clocks, interrupt numbers, gmac support timer and emmc pins) from its first real-world user. RK3188 improvements (OPPv2, cpu node updates) to prepare for a new devicetree, the BQ Edison 2 Quad-Core. VPU device node for rk3288, right now only the jpeg encoder part will be in the kernel but hopefully other codecs will follow. * tag 'v4.21-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: Add internal timer support for rv1108 ARM: dts: rockchip: add BQ Edison 2 QC devicetree ARM: dts: rockchip: add VPU device node for RK3288 ARM: dts: rockchip: update cpu supplies on rk3188 ARM: dts: rockchip: add phandles to secondary cpu cores ARM: dts: rockchip: add cpu-core resets for rk3188 ARM: dts: rockchip: convert rk3188 to opp-v2 ARM: dts: rockchip: add #sound-dai-cells to Cortex-A9 i2s ARM: dts: rockchip: Add UART DMA support for rv1108 ARM: dts: rockchip: Assign the proper GPIO clocks for rv1108 ARM: dts: rockchip: Fix the PMU interrupt number for rv1108 ARM: dts: rockchip: Pass the 'arm,cpu-registers-not-fw-configured' property on rv1108 ARM: dts: rockchip: Pass the 'clock-latency' property on rv1108 ARM: dts: rockchip: Add rv1108 GMAC support ARM: dts: rockchip: add rv1108 eMMC pin settings Signed-off-by: Olof Johansson <olof@lixom.net> 
RV1108 improvements (uart-dma, clocks, interrupt numbers, gmac support
timer and emmc pins) from its first real-world user.
RK3188 improvements (OPPv2, cpu node updates) to prepare for a new
devicetree, the BQ Edison 2 Quad-Core.
VPU device node for rk3288, right now only the jpeg encoder part
will be in the kernel but hopefully other codecs will follow.

* tag 'v4.21-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  ARM: dts: rockchip: Add internal timer support for rv1108
  ARM: dts: rockchip: add BQ Edison 2 QC devicetree
  ARM: dts: rockchip: add VPU device node for RK3288
  ARM: dts: rockchip: update cpu supplies on rk3188
  ARM: dts: rockchip: add phandles to secondary cpu cores
  ARM: dts: rockchip: add cpu-core resets for rk3188
  ARM: dts: rockchip: convert rk3188 to opp-v2
  ARM: dts: rockchip: add #sound-dai-cells to Cortex-A9 i2s
  ARM: dts: rockchip: Add UART DMA support for rv1108
  ARM: dts: rockchip: Assign the proper GPIO clocks for rv1108
  ARM: dts: rockchip: Fix the PMU interrupt number for rv1108
  ARM: dts: rockchip: Pass the 'arm,cpu-registers-not-fw-configured' property on rv1108
  ARM: dts: rockchip: Pass the 'clock-latency' property on rv1108
  ARM: dts: rockchip: Add rv1108 GMAC support
  ARM: dts: rockchip: add rv1108 eMMC pin settings

Signed-off-by: Olof Johansson <olof@lixom.net>
Merge tag 'imx7ulp-dt-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt 2018-12-12T20:56:36+00:00 Olof Johansson olof@lixom.net 2018-12-12T20:56:36+00:00 fafda335f81a6e5af64a3452185299c86ec32b5e i.MX7ULP device tree for 4.21: - It includes the initial device tree for i.MX7ULP SoC and EVK board support. * tag 'imx7ulp-dt-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx: add imx7ulp evk support ARM: dts: imx: add common imx7ulp dtsi support dt-bindings: fsl: add imx7ulp pm related components bindings dt-bindings: fsl: add compatible for imx7ulp evk clk: imx: add imx7ulp clk driver clk: imx: implement new clk_hw based APIs clk: imx: make mux parent strings const dt-bindings: clock: add imx7ulp clock binding doc clk: imx: add imx7ulp composite clk support clk: imx: add pfdv2 support clk: imx: add pllv4 support clk: fractional-divider: add CLK_FRAC_DIVIDER_ZERO_BASED flag support clk: imx: add gatable clock divider support Signed-off-by: Olof Johansson <olof@lixom.net> 
i.MX7ULP device tree for 4.21:
 - It includes the initial device tree for i.MX7ULP SoC and EVK board
   support.

* tag 'imx7ulp-dt-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: dts: imx: add imx7ulp evk support
  ARM: dts: imx: add common imx7ulp dtsi support
  dt-bindings: fsl: add imx7ulp pm related components bindings
  dt-bindings: fsl: add compatible for imx7ulp evk
  clk: imx: add imx7ulp clk driver
  clk: imx: implement new clk_hw based APIs
  clk: imx: make mux parent strings const
  dt-bindings: clock: add imx7ulp clock binding doc
  clk: imx: add imx7ulp composite clk support
  clk: imx: add pfdv2 support
  clk: imx: add pllv4 support
  clk: fractional-divider: add CLK_FRAC_DIVIDER_ZERO_BASED flag support
  clk: imx: add gatable clock divider support

Signed-off-by: Olof Johansson <olof@lixom.net>
Merge tag 'imx7d-pico-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt 2018-12-12T20:55:34+00:00 Olof Johansson olof@lixom.net 2018-12-12T20:55:34+00:00 2b6464560852f6c2ee2a37230cf29a23f324737c i.MX7D PICO boards update for 4.21: - It contains a series from Otavio Salvador that improves i.MX7D PICO SoM, and then adds Hobbit baseboard support on top of the improvement. * tag 'imx7d-pico-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx7d-pico: Add the imx7d-pico-hobbit variant ARM: dts: imx7d-pico-pi: Extend peripherals support ARM: dts: imx7d-pico: Extend peripherals support ARM: dts: imx7d-pico: Improve WiFi regulator name ARM: dts: imx7d-pico: Pass the Ethernet PHY reset GPIO ARM: dts: imx7d-pico: Pass the USBOTG1_PWR pinctrl ARM: dts: imx7d-pico-pi: Move SoM related part to imx7d-pico.dtsi ARM: dts: imx7d-pico: Switch to SPDX identifier ARM: dts: imx7d-pico: Do not harcode the memory size ARM: dts: imx7d-nitrogen7: Fix the description of the Wifi clock ARM: imx: update the cpu power up timing setting on i.mx6sx ARM: dts: imx7d-pico: Describe the Wifi clock ARM: dts: imx51-zii-rdu1: Remove EEPROM node Signed-off-by: Olof Johansson <olof@lixom.net> 
i.MX7D PICO boards update for 4.21:
 - It contains a series from Otavio Salvador that improves i.MX7D PICO
  SoM, and then adds Hobbit baseboard support on top of the improvement.

* tag 'imx7d-pico-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: dts: imx7d-pico: Add the imx7d-pico-hobbit variant
  ARM: dts: imx7d-pico-pi: Extend peripherals support
  ARM: dts: imx7d-pico: Extend peripherals support
  ARM: dts: imx7d-pico: Improve WiFi regulator name
  ARM: dts: imx7d-pico: Pass the Ethernet PHY reset GPIO
  ARM: dts: imx7d-pico: Pass the USBOTG1_PWR pinctrl
  ARM: dts: imx7d-pico-pi: Move SoM related part to imx7d-pico.dtsi
  ARM: dts: imx7d-pico: Switch to SPDX identifier
  ARM: dts: imx7d-pico: Do not harcode the memory size
  ARM: dts: imx7d-nitrogen7: Fix the description of the Wifi clock
  ARM: imx: update the cpu power up timing setting on i.mx6sx
  ARM: dts: imx7d-pico: Describe the Wifi clock
  ARM: dts: imx51-zii-rdu1: Remove EEPROM node

Signed-off-by: Olof Johansson <olof@lixom.net>
Merge tag 'imx-dt-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt 2018-12-12T20:54:48+00:00 Olof Johansson olof@lixom.net 2018-12-12T20:54:48+00:00 80b451cd68b490ee612c7f5ca04854d488b4a20d i.MX device tree update for 4.21: - New boards support: emtrion emCON-MX6, imx6ul-pico-pi, imx7d-sdb-reva and vf610 based Liebherr's BK4 device, ZII SCU4 AIB board. - Add flexcan support for i.MX6UL SoC, turn on stop mode wakeup feature for flexcan, and enable devices on a few i.MX6 NXP boards. - Enable AUO G101EVN010 lcd panel and Goodix touch support for imx6ul-ccimx6ulsbcpro board. - Enable sensors support for imx6qdl-sabresd board: egalax touch, light, magnetometer and accelerometer sensor. - Switch more boards to use SPDX identifier. - Fix memory node duplication in i.MX device tree sources. - Correct GIC PPI interrupts mask for i.MX6UL and i.MX7 SoCs. - Drop 'snps,dw-pcie' compatible from LS1021A PCIe device to avoid incorrect device matching. - Add the gpu nodes for the adreno 200 GPU on iMX51 and iMX53, which are now supported by the freedreno driver. - Add DCP device support for i.MX6ULL, which requires explicit clock enabling. - Add '#thermal-sensor-cells' for thermal device and '#cooling-cells' for cooling devices. - Add missing clock information for EPIT on i.MX25 SoC. - Add PWM and qdma devices for LS1021A SoC. - Update cooling maps of LS1021A SoC to include all devices affected by individual trip points. - Random device addition and cleanup on various boards. * tag 'imx-dt-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (82 commits) ARM: dts: imx51-zii-rdu1: Do not specify "power-gpio" for hpa1 ARM: dts: imx6ul: Remove extra space between node name and brace ARM: dts: imx6qdl-sabresd: Use GPIO_ACTIVE_HIGH for regulators ARM: dts: imx6ul: add flexcan support ARM: dts: imx5: add gpu nodes ARM: dts: imx6qdl-sabresd: add accelerometer sensor support ARM: dts: imx6qdl-sabresd: add magnetometer sensor support ARM: dts: imx6qdl-sabresd: add light sensor support ARM: dts: imx6qdl-sabresd: Move regulators outside of "simple-bus" ARM: dts: imx6qdl: Fix memory node duplication ARM: dts: imx6dl-mamoj: Add a memory node ARM: dts: imx53-voipac-dmm-668: Fix memory node duplication ARM: dts: vf610-zii-scu4-aib: Add HI8435 support ARM: dts: imx6qdl-sabresd: add egalax touch screen support on i2c2 bus ARM: dts: imx7s: Add flexcan stop mode wakeup support ARM: dts: imx6ul: Add flexcan stop mode wakeup support ARM: dts: imx6qdl: Add flexcan stop mode wakeup support ARM: dts: imx6sx: Add flexcan stop mode wakeup support ARM: dts: imx6ul-pico: Add the imx6ul-pico-pi variant ARM: dts: imx6ul-pico-hobbit: Extend peripherals support ... Signed-off-by: Olof Johansson <olof@lixom.net> 
i.MX device tree update for 4.21:
 - New boards support: emtrion emCON-MX6, imx6ul-pico-pi, imx7d-sdb-reva
   and vf610 based Liebherr's BK4 device, ZII SCU4 AIB board.
 - Add flexcan support for i.MX6UL SoC, turn on stop mode wakeup feature
   for flexcan, and enable devices on a few i.MX6 NXP boards.
 - Enable AUO G101EVN010 lcd panel and Goodix touch support for
   imx6ul-ccimx6ulsbcpro board.
 - Enable sensors support for imx6qdl-sabresd board: egalax touch, light,
   magnetometer and accelerometer sensor.
 - Switch more boards to use SPDX identifier.
 - Fix memory node duplication in i.MX device tree sources.
 - Correct GIC PPI interrupts mask for i.MX6UL and i.MX7 SoCs.
 - Drop 'snps,dw-pcie' compatible from LS1021A PCIe device to avoid
   incorrect device matching.
 - Add the gpu nodes for the adreno 200 GPU on iMX51 and iMX53, which
   are now supported by the freedreno driver.
 - Add DCP device support for i.MX6ULL, which requires explicit clock
   enabling.
 - Add '#thermal-sensor-cells' for thermal device and '#cooling-cells'
   for cooling devices.
 - Add missing clock information for EPIT on i.MX25 SoC.
 - Add PWM and qdma devices for LS1021A SoC.
 - Update cooling maps of LS1021A SoC to include all devices affected by
   individual trip points.
 - Random device addition and cleanup on various boards.

* tag 'imx-dt-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (82 commits)
  ARM: dts: imx51-zii-rdu1: Do not specify "power-gpio" for hpa1
  ARM: dts: imx6ul: Remove extra space between node name and brace
  ARM: dts: imx6qdl-sabresd: Use GPIO_ACTIVE_HIGH for regulators
  ARM: dts: imx6ul: add flexcan support
  ARM: dts: imx5: add gpu nodes
  ARM: dts: imx6qdl-sabresd: add accelerometer sensor support
  ARM: dts: imx6qdl-sabresd: add magnetometer sensor support
  ARM: dts: imx6qdl-sabresd: add light sensor support
  ARM: dts: imx6qdl-sabresd: Move regulators outside of "simple-bus"
  ARM: dts: imx6qdl: Fix memory node duplication
  ARM: dts: imx6dl-mamoj: Add a memory node
  ARM: dts: imx53-voipac-dmm-668: Fix memory node duplication
  ARM: dts: vf610-zii-scu4-aib: Add HI8435 support
  ARM: dts: imx6qdl-sabresd: add egalax touch screen support on i2c2 bus
  ARM: dts: imx7s: Add flexcan stop mode wakeup support
  ARM: dts: imx6ul: Add flexcan stop mode wakeup support
  ARM: dts: imx6qdl: Add flexcan stop mode wakeup support
  ARM: dts: imx6sx: Add flexcan stop mode wakeup support
  ARM: dts: imx6ul-pico: Add the imx6ul-pico-pi variant
  ARM: dts: imx6ul-pico-hobbit: Extend peripherals support
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>
Merge tag 'sunxi-dt-for-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt 2018-12-12T20:48:57+00:00 Olof Johansson olof@lixom.net 2018-12-12T20:48:57+00:00 2c94db389bbae850a6f353d9b93ee22c170d8497 Allwinner DT changes for 4.21 This is a quite big pull request this time, with a huge number of changes (and patches) due to us fixing the vast majority of the DTC warnings our DT had. We also have a bunch of other good, more meaningful, changes: - Support for the new Allwinner T3 (rebranded R40) and f1c100s (armv5) SoCs - AXP803 PMIC AC Power supply support - Rework of the oscillators tree - Two new boards: the t3-cqa3t-bv3 and Lichee Pi Nano Plus a few enhancements here and there. * tag 'sunxi-dt-for-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (84 commits) ARM: dts: sunxi: Fix PMU compatible strings ARM: dts: sun8i: r40: Add RTC device node ARM: dts: sunxi: h3/h5: Fix up RTC device node and clock references ARM: dts: sun8i: a23/a33: Fix up RTC device node ARM: dts: sun8i: r40: Add clock accuracy for external oscillators ARM: dts: sunxi: h3/h5: Add clock accuracy for external oscillators ARM: dts: sun8i: a33: Drop audio codec oversampling rate to 128 fs ARM: dts: sun8i: h3: Remove unnecessary reserved memory node ARM: dts: sun8i: a33: Remove unnecessary reserved memory node ARM: dts: suniv: Add device tree for Lichee Pi Nano ARM: dts: suniv: add initial DTSI file for F1C100s ARM: dts: axp81x: add AC power supply subnode ARM: dts: sun8i: v3s: Remove skeleton and memory to avoid warnings ARM: dts: sun8i: v3s: Provide default muxing for relevant controllers ARM: dts: sun8i: v3s: Change pinctrl nodes to avoid warning ARM: dts: sun8i: v3s: Change LRADC node names to avoid warnings ARM: dts: sun8i: h3: Remove leading zeros from unit-addresses ARM: dts: sun8i: BPI-M2M: Remove i2c nodes ARM: dts: sun8i: a23/a33: Provide default muxing for relevant controllers ARM: dts: sunxi: reference: Move the muxing back to the common DTSI ... Signed-off-by: Olof Johansson <olof@lixom.net> 
Allwinner DT changes for 4.21

This is a quite big pull request this time, with a huge number of changes
(and patches) due to us fixing the vast majority of the DTC warnings our DT
had.

We also have a bunch of other good, more meaningful, changes:
  - Support for the new Allwinner T3 (rebranded R40) and f1c100s (armv5)
    SoCs
  - AXP803 PMIC AC Power supply support
  - Rework of the oscillators tree
  - Two new boards: the t3-cqa3t-bv3 and Lichee Pi Nano

Plus a few enhancements here and there.

* tag 'sunxi-dt-for-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (84 commits)
  ARM: dts: sunxi: Fix PMU compatible strings
  ARM: dts: sun8i: r40: Add RTC device node
  ARM: dts: sunxi: h3/h5: Fix up RTC device node and clock references
  ARM: dts: sun8i: a23/a33: Fix up RTC device node
  ARM: dts: sun8i: r40: Add clock accuracy for external oscillators
  ARM: dts: sunxi: h3/h5: Add clock accuracy for external oscillators
  ARM: dts: sun8i: a33: Drop audio codec oversampling rate to 128 fs
  ARM: dts: sun8i: h3: Remove unnecessary reserved memory node
  ARM: dts: sun8i: a33: Remove unnecessary reserved memory node
  ARM: dts: suniv: Add device tree for Lichee Pi Nano
  ARM: dts: suniv: add initial DTSI file for F1C100s
  ARM: dts: axp81x: add AC power supply subnode
  ARM: dts: sun8i: v3s: Remove skeleton and memory to avoid warnings
  ARM: dts: sun8i: v3s: Provide default muxing for relevant controllers
  ARM: dts: sun8i: v3s: Change pinctrl nodes to avoid warning
  ARM: dts: sun8i: v3s: Change LRADC node names to avoid warnings
  ARM: dts: sun8i: h3: Remove leading zeros from unit-addresses
  ARM: dts: sun8i: BPI-M2M: Remove i2c nodes
  ARM: dts: sun8i: a23/a33: Provide default muxing for relevant controllers
  ARM: dts: sunxi: reference: Move the muxing back to the common DTSI
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>
Merge tag 'renesas-arm-dt2-for-v4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt 2018-12-11T16:03:48+00:00 Olof Johansson olof@lixom.net 2018-12-11T16:03:48+00:00 857f00213315e4502e5bc1170baf740b639ae73d Second Round of Renesas ARM Based SoC DT Updates for v4.21 * RZ/G1N (r8a7744) SoC - Describe in DT: SYS-DMAC, GPIO, Ethernet AVB, SMP, [H]SCIF{A|B}, I2C, USB 2.0 and 3.0 hosts, USB-DMAC, HSUSB, RWDT, Audio, CAN, IRQC, thermal, CMT, VIN, VSP, IPMMU, PMU, TPU, QSPI MSIOF, and PCIE - iWave G20D-Q7 board - Initial support - Enable eMMC, SDHI and SPIO NOR support - Add camera daughterboard * RZ/G1M (r8a7743) SoC - Remove legacy "renesas,rcar-thermal" compatibility * tag 'renesas-arm-dt2-for-v4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (34 commits) ARM: dts: r8a7744-iwg20m: Add SPI NOR support ARM: dts: iwg20d-q7-common: Move cmt/rwdt node out of RZ/G1M SOM ARM: dts: r8a7744: Add PCIe Controller device node ARM: dts: r8a7744: Add xhci support ARM: dts: r8a7744: Add MSIOF[012] support ARM: dts: r8a7744: Add QSPI support ARM: dts: r8a7744-iwg20d-q7-dbcm-ca: Add device tree for camera DB ARM: dts: r8a7744: Add TPU support ARM: dts: r8a7744: Add PWM SoC support ARM: dts: r8a7744: Add IPMMU DT nodes ARM: dts: r8a7744: Add VSP support ARM: dts: r8a7744: add VIN dt support ARM: dts: r8a7744: Add CMT SoC specific support ARM: dts: r8a7744: Add thermal device to DT ARM: dts: r8a7744: Add IRQC support ARM: dts: r8a7744: Add CAN support ARM: dts: r8a7744: Add audio support ARM: dts: r8a7744: Add RWDT node ARM: dts: r8a7744: Add USB-DMAC and HSUSB device nodes ARM: dts: r8a7744: USB 2.0 host support ... Signed-off-by: Olof Johansson <olof@lixom.net> 
Second Round of Renesas ARM Based SoC DT Updates for v4.21

* RZ/G1N (r8a7744) SoC
  - Describe in DT: SYS-DMAC, GPIO, Ethernet AVB, SMP, [H]SCIF{A|B},
    I2C, USB 2.0 and 3.0 hosts, USB-DMAC, HSUSB, RWDT, Audio, CAN, IRQC,
    thermal, CMT, VIN, VSP, IPMMU, PMU, TPU, QSPI MSIOF, and PCIE
  - iWave G20D-Q7 board
    - Initial support
    - Enable eMMC, SDHI and SPIO NOR support
  - Add camera daughterboard

* RZ/G1M (r8a7743) SoC
  - Remove legacy "renesas,rcar-thermal" compatibility

* tag 'renesas-arm-dt2-for-v4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (34 commits)
  ARM: dts: r8a7744-iwg20m: Add SPI NOR support
  ARM: dts: iwg20d-q7-common: Move cmt/rwdt node out of RZ/G1M SOM
  ARM: dts: r8a7744: Add PCIe Controller device node
  ARM: dts: r8a7744: Add xhci support
  ARM: dts: r8a7744: Add MSIOF[012] support
  ARM: dts: r8a7744: Add QSPI support
  ARM: dts: r8a7744-iwg20d-q7-dbcm-ca: Add device tree for camera DB
  ARM: dts: r8a7744: Add TPU support
  ARM: dts: r8a7744: Add PWM SoC support
  ARM: dts: r8a7744: Add IPMMU DT nodes
  ARM: dts: r8a7744: Add VSP support
  ARM: dts: r8a7744: add VIN dt support
  ARM: dts: r8a7744: Add CMT SoC specific support
  ARM: dts: r8a7744: Add thermal device to DT
  ARM: dts: r8a7744: Add IRQC support
  ARM: dts: r8a7744: Add CAN support
  ARM: dts: r8a7744: Add audio support
  ARM: dts: r8a7744: Add RWDT node
  ARM: dts: r8a7744: Add USB-DMAC and HSUSB device nodes
  ARM: dts: r8a7744: USB 2.0 host support
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>