linux-toradex.git/arch/arm/boot/dts/Makefile, branch v6.7 Linux kernel for Apalis and Colibri modules ARM: dts: Move .dts files to vendor sub-directories 2023-06-21T17:39:50+00:00 Rob Herring robh@kernel.org 2023-05-04T23:38:52+00:00 724ba6751532055db75992fc6ae21c3e322e94a7 The arm dts directory has grown to 1559 boards which makes it a bit unwieldy to maintain and use. Past attempts stalled out due to plans to move .dts files out of the kernel tree. Doing that is no longer planned (any time soon at least), so let's go ahead and group .dts files by vendors. This move aligns arm with arm64 .dts file structure. There's no change to dtbs_install as the flat structure is maintained on install. The naming of vendor directories is roughly in this order of preference: - Matching original and current SoC vendor prefix/name (e.g. ti, qcom) - Current vendor prefix/name if still actively sold (SoCs which have been aquired) (e.g. nxp/imx) - Existing platform name for older platforms not sold/maintained by any company (e.g. gemini, nspire) The whole move was scripted with the exception of MAINTAINERS and a few makefile fixups. Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Neil Armstrong <neil.armstrong@linaro.org> Acked-by: Paul Barker <paul.barker@sancloud.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Nick Hawkins <nick.hawkins@hpe.com> Acked-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Peter Rosin <peda@axentia.se> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom Acked-by: Manivannan Sadhasivam <mani@kernel.org> Reviewed-by: Jisheng Zhang <jszhang@kernel.org> Acked-by: Patrice Chotard <patrice.chotard@foss.st.com> Acked-by: Romain Perier <romain.perier@gmail.com> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org> 
The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.

There's no change to dtbs_install as the flat structure is maintained on
install.

The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
  been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
  company (e.g. gemini, nspire)

The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
ARM: dts: Add .dts files missing from the build 2023-06-21T13:51:08+00:00 Rob Herring robh@kernel.org 2023-05-02T17:25:29+00:00 86684c2481b6e6a46c2282acee13554e34e66071 Comparing .dts files to built .dtb files yielded a few .dts files which are never built. Add them to the build. Signed-off-by: Rob Herring <robh@kernel.org> 
Comparing .dts files to built .dtb files yielded a few .dts files which
are never built. Add them to the build.

Signed-off-by: Rob Herring <robh@kernel.org>
Merge tag 'arm-soc/for-6.5/devicetree' of https://github.com/Broadcom/stblinux into soc/dt 2023-06-20T21:04:38+00:00 Arnd Bergmann arnd@arndb.de 2023-06-20T21:04:37+00:00 313c22bb31953c5ac7f3be94279126307dd5865c This pull request contains Broadcom ARM-based SoCs Device Tree changes for 6.5, please pull the following: - Krzysztof adds missing cache properties for the BCM63xx DSL routers - Rafal relicenses a number of the BCM5301X DTS files to the GPL 2.0+ / MIT license, and he fixes a number of Device Tree nodes warnings, adds MAC address for all Luxul routers and adds Netgear R8000 Wi-Fi regulatory information to the DTS - Stanislav updates the "BCM mobile" SoCs DTS files to fix various warnings - Aurelien enables the BCM283x DTS files to be built with relocation information to make them usable with DT overlays - Christian fixes the Meraki DTS to have correct NAND ECC properties, correct partition numbers and fixed-link node(s) properties * tag 'arm-soc/for-6.5/devicetree' of https://github.com/Broadcom/stblinux: (33 commits) ARM: dts: BCM5301X: Add cells sizes to PCIe nodes dt-bindings: firmware: brcm,kona-smc: convert to YAML ARM: dts: BCM5301X: Add Netgear R8000 WiFi regulator mappings dt-bindings: net: wireless: brcm,bcm4329-fmac: allow generic properties dt-bindings: net: wireless: brcm,bcm4329-fmac: add BCM4366 binding ARM: dts: BCM5301X: fix duplex-full => full-duplex ARM: dts: BCM5301X: MR32: remove partition index numbers ARM: dts: BCM5301X: MR26: MR32: remove bogus nand-ecc-algo property dt-bindings: power: reset: bcm21664-resetmgr: convert to YAML ARM: dts: bcm21664-garnet: use node labels ARM: dts: bcm11351/21664: add UART, I2C node labels ARM: dts: bcm-mobile: move status properties to the end of nodes ARM: dts: bcm21664/23550: use CCU compatibles directly ARM: dts: bcm-mobile: change "" includes to <> where applicable ARM: dts: BCM5301X: Describe switch ports in the main DTS ARM: dts: BCM5301X: Relicense Christian's code to the GPL 2.0+ / MIT ARM: dts: BCM5301X: Drop invalid properties from Meraki MR32 keys ARM: dts: BCM5301X: Drop invalid #usb-cells dt-bindings: arm: bcm: Add bindings for Buffalo WZR-1166DHP(2) ARM: dts: BCM5301X: Use updated "spi-gpio" binding properties ... Link: https://lore.kernel.org/r/20230619134920.3384844-1-florian.fainelli@broadcom.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> 
This pull request contains Broadcom ARM-based SoCs Device Tree changes
for 6.5, please pull the following:

- Krzysztof adds missing cache properties for the BCM63xx DSL routers

- Rafal relicenses a number of the BCM5301X DTS files to the GPL 2.0+ / MIT license,
  and he fixes a number of Device Tree nodes warnings, adds MAC address
  for all Luxul routers and adds Netgear R8000 Wi-Fi regulatory
  information to the DTS

- Stanislav updates the "BCM mobile" SoCs DTS files to fix various
  warnings

- Aurelien enables the BCM283x DTS files to be built with relocation
  information to make them usable with DT overlays

- Christian fixes the Meraki DTS to have correct NAND ECC properties,
  correct partition numbers and fixed-link node(s) properties

* tag 'arm-soc/for-6.5/devicetree' of https://github.com/Broadcom/stblinux: (33 commits)
  ARM: dts: BCM5301X: Add cells sizes to PCIe nodes
  dt-bindings: firmware: brcm,kona-smc: convert to YAML
  ARM: dts: BCM5301X: Add Netgear R8000 WiFi regulator mappings
  dt-bindings: net: wireless: brcm,bcm4329-fmac: allow generic properties
  dt-bindings: net: wireless: brcm,bcm4329-fmac: add BCM4366 binding
  ARM: dts: BCM5301X: fix duplex-full => full-duplex
  ARM: dts: BCM5301X: MR32: remove partition index numbers
  ARM: dts: BCM5301X: MR26: MR32: remove bogus nand-ecc-algo property
  dt-bindings: power: reset: bcm21664-resetmgr: convert to YAML
  ARM: dts: bcm21664-garnet: use node labels
  ARM: dts: bcm11351/21664: add UART, I2C node labels
  ARM: dts: bcm-mobile: move status properties to the end of nodes
  ARM: dts: bcm21664/23550: use CCU compatibles directly
  ARM: dts: bcm-mobile: change "" includes to <> where applicable
  ARM: dts: BCM5301X: Describe switch ports in the main DTS
  ARM: dts: BCM5301X: Relicense Christian's code to the GPL 2.0+ / MIT
  ARM: dts: BCM5301X: Drop invalid properties from Meraki MR32 keys
  ARM: dts: BCM5301X: Drop invalid #usb-cells
  dt-bindings: arm: bcm: Add bindings for Buffalo WZR-1166DHP(2)
  ARM: dts: BCM5301X: Use updated "spi-gpio" binding properties
  ...

Link: https://lore.kernel.org/r/20230619134920.3384844-1-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
arm: dts: Enable device-tree overlay support for AT91 boards 2023-06-20T21:03:19+00:00 Cristian Birsan cristian.birsan@microchip.com 2023-06-16T15:29:32+00:00 11d5441cde740c89252290e04ad79f133c366bdb Add the '-@' DTC option for AT91 boards that have device-tree overlays. This option populates the '__symbols__' node that contains all the necessary symbols for supporting device-tree overlays (from bootloader) on these devices. This change increases the size of the resulting DTB with ~30%-40%. Below are the measurements performed v6.4-rc6: at91-sam9x60_curiosity.dtb 28499 -> 36641 bytes at91-sam9x60ek.dtb 30867 -> 39609 bytes at91-sama5d27_som1_ek.dtb 26086 -> 34166 bytes at91-sama5d27_wlsom1_ek.dtb 26045 -> 33184 bytes at91-sama5d2_icp.dtb 27521 -> 36155 bytes at91-sama5d2_ptc_ek.dtb 23237 -> 29612 bytes at91-sama5d2_xplained.dtb 27262 -> 35326 bytes at91-sama5d3_eds.dtb 27924 -> 39939 bytes at91-sama5d3_xplained.dtb 28400 -> 40650 bytes at91-sama5d4_xplained.dtb 26456 -> 36107 bytes at91-sama7g5ek.dtb 29212 -> 37289 bytes Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com> Link: https://lore.kernel.org/r/20230616152932.1484154-1-cristian.birsan@microchip.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> 
Add the '-@' DTC option for AT91 boards that have device-tree overlays.
This option populates the '__symbols__' node that contains all the
necessary symbols for supporting device-tree overlays (from bootloader)
on these devices.

This change increases the size of the resulting DTB with ~30%-40%. Below
are the measurements performed v6.4-rc6:

at91-sam9x60_curiosity.dtb	28499 -> 36641 bytes
at91-sam9x60ek.dtb		30867 -> 39609 bytes
at91-sama5d27_som1_ek.dtb	26086 -> 34166 bytes
at91-sama5d27_wlsom1_ek.dtb	26045 -> 33184 bytes
at91-sama5d2_icp.dtb		27521 -> 36155 bytes
at91-sama5d2_ptc_ek.dtb		23237 -> 29612 bytes
at91-sama5d2_xplained.dtb	27262 -> 35326 bytes
at91-sama5d3_eds.dtb		27924 -> 39939 bytes
at91-sama5d3_xplained.dtb	28400 -> 40650 bytes
at91-sama5d4_xplained.dtb	26456 -> 36107 bytes
at91-sama7g5ek.dtb		29212 -> 37289 bytes

Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com>
Link: https://lore.kernel.org/r/20230616152932.1484154-1-cristian.birsan@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Merge tag 'mvebu-dt-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/dt 2023-06-20T21:00:37+00:00 Arnd Bergmann arnd@arndb.de 2023-06-20T21:00:37+00:00 e86147a28a152cf683538a98653a126754bf8d8b mvebu dt for 6.5 (part 1) Add Endian 4i Edge 200 board (kirkwood based) Add missing phy-modes on Armada 388 clearfog board Replace deprecated spi-gpio properties on Armada XP Align MTD partition nodes to dtschema for all mvebu boards * tag 'mvebu-dt-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: ARM: dts: mvebu: align MTD partition nodes to dtschema ARM: dts: armada-xp: Replace deprecated spi-gpio properties ARM: dts: armada388-clearfog: add missing phy-modes ARM: dts: kirkwood: Add Endian 4i Edge 200 board Link: https://lore.kernel.org/r/87a5wzh8b1.fsf@BL-laptop Signed-off-by: Arnd Bergmann <arnd@arndb.de> 
mvebu dt for 6.5 (part 1)

Add Endian 4i Edge 200 board (kirkwood based)
Add missing phy-modes on Armada 388 clearfog board
Replace deprecated spi-gpio properties on Armada XP
Align MTD partition nodes to dtschema for all mvebu boards

* tag 'mvebu-dt-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
  ARM: dts: mvebu: align MTD partition nodes to dtschema
  ARM: dts: armada-xp: Replace deprecated spi-gpio properties
  ARM: dts: armada388-clearfog: add missing phy-modes
  ARM: dts: kirkwood: Add Endian 4i Edge 200 board

Link: https://lore.kernel.org/r/87a5wzh8b1.fsf@BL-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Merge tag 'qcom-dts-for-6.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt 2023-06-20T20:57:30+00:00 Arnd Bergmann arnd@arndb.de 2023-06-20T20:57:29+00:00 d09d747ee5cb0727a9f0588bc166c3a79fa3bc3d More Qualcomm ARM32 DeviceTree updates for v6.5 On MSM8960, support for USB is added and the Samsung Galaxy Express is added. GPIO keys and on-board LEDs are described for the APQ8074 Dragonboard. On MSM8226, QFPROM, tsens and thermal zones are defined, and the description of the clock hierarchy is improved. The PCIe endpoint controller on SDX55 gains a interconnect path to DDR defined. Sony Xperia X2 Tablet and Samsung Galaxy Tab 4 are updated following changes in the LP855X DeviceTree binding. * tag 'qcom-dts-for-6.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: arm: dts: qcom: sdx55: Add interconnect path ARM: dts: qcom: msm8226: Add thermal zones node ARM: dts: qcom: msm8226: Add tsens node and related nvmem cells ARM: dts: qcom: msm8226: Add qfprom node ARM: dts: qcom: pm8941: Add thermal zone config ARM: dts: qcom: pm8841: Add thermal zone config ARM: dts: qcom: pm8226: Add thermal sensor and thermal zone config ARM: dts: qcom: msm8974: rename labels for DSI nodes ARM: dts: qcom: apq8074-dragonboard: add gpio keys ARM: dts: qcom: apq8074-dragonboard: add onboard leds ARM: dts: qcom: Add Samsung Galaxy Express support ARM: dts: qcom: msm8960: Add USB node ARM: dts: qcom: adapt to LP855X bindings changes ARM: dts: qcom: msm8226: Provide clocks to mmcc node ARM: dts: qcom: msm8226: Use XO from rpmcc where possible Link: https://lore.kernel.org/r/20230615163926.1462225-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> 
More Qualcomm ARM32 DeviceTree updates for v6.5

On MSM8960, support for USB is added and the Samsung Galaxy Express is
added.

GPIO keys and on-board LEDs are described for the APQ8074 Dragonboard.

On MSM8226, QFPROM, tsens and thermal zones are defined, and the
description of the clock hierarchy is improved.

The PCIe endpoint controller on SDX55 gains a interconnect path to DDR
defined.

Sony Xperia X2 Tablet and Samsung Galaxy Tab 4 are updated following
changes in the LP855X DeviceTree binding.

* tag 'qcom-dts-for-6.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
  arm: dts: qcom: sdx55: Add interconnect path
  ARM: dts: qcom: msm8226: Add thermal zones node
  ARM: dts: qcom: msm8226: Add tsens node and related nvmem cells
  ARM: dts: qcom: msm8226: Add qfprom node
  ARM: dts: qcom: pm8941: Add thermal zone config
  ARM: dts: qcom: pm8841: Add thermal zone config
  ARM: dts: qcom: pm8226: Add thermal sensor and thermal zone config
  ARM: dts: qcom: msm8974: rename labels for DSI nodes
  ARM: dts: qcom: apq8074-dragonboard: add gpio keys
  ARM: dts: qcom: apq8074-dragonboard: add onboard leds
  ARM: dts: qcom: Add Samsung Galaxy Express support
  ARM: dts: qcom: msm8960: Add USB node
  ARM: dts: qcom: adapt to LP855X bindings changes
  ARM: dts: qcom: msm8226: Provide clocks to mmcc node
  ARM: dts: qcom: msm8226: Use XO from rpmcc where possible

Link: https://lore.kernel.org/r/20230615163926.1462225-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Merge tag 'imx-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt 2023-06-20T20:38:10+00:00 Arnd Bergmann arnd@arndb.de 2023-06-20T20:38:10+00:00 f50a4e594db87ad8beed9bb42a067224724d07de i.MX ARM device tree for 6.5: - New board support: Marantec Maveo Box. - Add HDMI support for TQMa6x/MBa6 board. - A series from Andrew Lunn to add phy-mode and fixed links for Ethernet devices on imx51, imx6qdl and vf610. - A bunch of changes from Fabio Estevam to clean up deprecated and invalid properies, fix up node names to remove dt-schema warnings. - A series of maintenance updates for Protonic Holland boards, mostly on the USB subsystem configuration, thermal zones, and the naming of GPIO keys. - Update dma-apbh device node name to remove dtbs_check warnings. - Remove invalid nodes from fan-controller for a couple of Gateworks boards. - Small random updates and clean-ups on various boards. * tag 'imx-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (53 commits) ARM: dts: imx6qdl: vicut1: rename power to power-button ARM: dts: imx6dl: prtrvt, prtvt7, prti6q, prtwd2: fix USB related warnings ARM: dts: imx6dl: plybas: fix USB over-current detection on USB OTG port ARM: dts: imx6ul: prti6g: fix USB over-current detection on USB OTG port ARM: dts: imx6qp: prtwd3: Enable USB over current detection on USB OTG port ARM: dts: imx6dl: prtmvt: fix different USB related warnings ARM: dts: imx6dl: alti6p: fix different USB related warnings ARM: dts: imx6dl: vicut1: Address USB related warnings ARM: dts: imx6dl: Add trip points to thermal zones on several devices ARM: dts: imx6dl: lanmcu: Configure over-current polarity for USB OTG node ARM: dts: imx6dl: lanmcu: Disable unused USB PHY nodes ARM: dts: imx6q: prtwd2: Correct iomux configuration for ENET MDIO and MDC ARM: dts: imx6dl: prtvt7: Remove touchscreen inversion ARM: dts: imx6dl: prtvt7: Adjust default backlight brightness to 65 ARM: dts: imx6qdl: vicut1: The sgtl5000 uses i2s not ac97 ARM: dts: imx: Use 'eeprom' as node name ARM: dts: imx6ul-ccimx6ulsom: Fix the "coin" regulator name ARM: dts: imx: Use 'pmic' as node name ARM: dts: imx6: Use the mux- prefix ARM: dts: imx7d-sdb: Allow UHS modes ... Link: https://lore.kernel.org/r/20230610072530.418847-2-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> 
i.MX ARM device tree for 6.5:

- New board support: Marantec Maveo Box.
- Add HDMI support for TQMa6x/MBa6 board.
- A series from Andrew Lunn to add phy-mode and fixed links for Ethernet
  devices on imx51, imx6qdl and vf610.
- A bunch of changes from Fabio Estevam to clean up deprecated and
  invalid properies, fix up node names to remove dt-schema warnings.
- A series of maintenance updates for Protonic Holland boards, mostly
  on the USB subsystem configuration, thermal zones, and the naming of
  GPIO keys.
- Update dma-apbh device node name to remove dtbs_check warnings.
- Remove invalid nodes from fan-controller for a couple of Gateworks
  boards.
- Small random updates and clean-ups on various boards.

* tag 'imx-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (53 commits)
  ARM: dts: imx6qdl: vicut1: rename power to power-button
  ARM: dts: imx6dl: prtrvt, prtvt7, prti6q, prtwd2: fix USB related warnings
  ARM: dts: imx6dl: plybas: fix USB over-current detection on USB OTG port
  ARM: dts: imx6ul: prti6g: fix USB over-current detection on USB OTG port
  ARM: dts: imx6qp: prtwd3: Enable USB over current detection on USB OTG port
  ARM: dts: imx6dl: prtmvt: fix different USB related warnings
  ARM: dts: imx6dl: alti6p: fix different USB related warnings
  ARM: dts: imx6dl: vicut1: Address USB related warnings
  ARM: dts: imx6dl: Add trip points to thermal zones on several devices
  ARM: dts: imx6dl: lanmcu: Configure over-current polarity for USB OTG node
  ARM: dts: imx6dl: lanmcu: Disable unused USB PHY nodes
  ARM: dts: imx6q: prtwd2: Correct iomux configuration for ENET MDIO and MDC
  ARM: dts: imx6dl: prtvt7: Remove touchscreen inversion
  ARM: dts: imx6dl: prtvt7: Adjust default backlight brightness to 65
  ARM: dts: imx6qdl: vicut1: The sgtl5000 uses i2s not ac97
  ARM: dts: imx: Use 'eeprom' as node name
  ARM: dts: imx6ul-ccimx6ulsom: Fix the "coin" regulator name
  ARM: dts: imx: Use 'pmic' as node name
  ARM: dts: imx6: Use the mux- prefix
  ARM: dts: imx7d-sdb: Allow UHS modes
  ...

Link: https://lore.kernel.org/r/20230610072530.418847-2-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Merge tag 'sunxi-dt-for-6.5-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt 2023-06-20T20:36:27+00:00 Arnd Bergmann arnd@arndb.de 2023-06-20T20:36:26+00:00 52d38cff94f8d601493774dfe0b161de1adba7e1 - fix DCLK clock names - new board ICnova A20 ADB4006 - add D1 SPI node - add bluetooth node for chip board - add extra mmc2 pinmux to sun5i - add axp209 iio-hwmon node * tag 'sunxi-dt-for-6.5-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: dts: axp209: Add iio-hwmon node for internal temperature ARM: dts: sun5i: Add port E pinmux settings for mmc2 ARM: dts: sun5i: chip: Enable bluetooth riscv: dts: allwinner: d1: Add SPI controllers node arm: dts: sunxi: Add ICnova A20 ADB4006 board dt-bindings: arm: sunxi: add ICnova A20 ADB4006 binding ARM: dts: sunxi: rename tcon's clock output Link: https://lore.kernel.org/r/20230609210452.GA17638@jernej-laptop Signed-off-by: Arnd Bergmann <arnd@arndb.de> 
- fix DCLK clock names
- new board ICnova A20 ADB4006
- add D1 SPI node
- add bluetooth node for chip board
- add extra mmc2 pinmux to sun5i
- add axp209 iio-hwmon node

* tag 'sunxi-dt-for-6.5-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  ARM: dts: axp209: Add iio-hwmon node for internal temperature
  ARM: dts: sun5i: Add port E pinmux settings for mmc2
  ARM: dts: sun5i: chip: Enable bluetooth
  riscv: dts: allwinner: d1: Add SPI controllers node
  arm: dts: sunxi: Add ICnova A20 ADB4006 board
  dt-bindings: arm: sunxi: add ICnova A20 ADB4006 binding
  ARM: dts: sunxi: rename tcon's clock output

Link: https://lore.kernel.org/r/20230609210452.GA17638@jernej-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Merge tag 'stm32-dt-for-v6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt 2023-06-20T20:31:22+00:00 Arnd Bergmann arnd@arndb.de 2023-06-20T20:31:22+00:00 b1062d1971ff389e5ebc1f52334f444dd24da86c STM32 DT for v6.5, round 1 Highlights: ---------- - MCU/MPU: - Replace deprecated st,hw-flow-ctrl by uart-has-rtscts. - Fix LTDC/DSI warnings. - MPU: - STMP32MP15: - Add OTP part number and Vrefint calibration in bsec. - M4 hold management updated. As SMC call is deprecated, the service is moved on a SCMI service. - Add ADC internal channels (VREFINT/VDDCORE). - ST: - Enable ADC1&2 on STM32MP15 DKx boards. - Adopt generic IIO bindings on STM32MP157C ED1 - Add supplies for OV5640 in STM32MP157C EV1 to fix yaml validation. - Fix i2s bindings to match with the YAML validation (DKx boards). - DH: - Rearrange MAC EEPROM. - Rename AV96 sound card. - Adopt generic IIo bindings. - Fix audio routing. -PHYTEC: - Add PHYTEC STM32MP1-3 Dev board based on STM32MP15 PHYTEC SOM. This SOM embeds up to 1GB DDR3LP RAM, up to 1GB eMMC, up to 16 MB QSPI and up to 128 GB NAND flash. * tag 'stm32-dt-for-v6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (34 commits) ARM: dts: stm32: fix i2s endpoint format property for stm32mp15xx-dkx ARM: dts: stm32: Fix audio routing on STM32MP15xx DHCOM PDK2 ARM: dts: stm32: add required supplies of ov5640 in stm32mp157c-ev1 ARM: dts: stm32: Update to generic ADC channel binding on DHSOM systems ARM: dts: stm32: adopt generic iio bindings for adc channels on dhcor-testbench ARM: dts: stm32: adopt generic iio bindings for adc channels on dhcor-drc ARM: dts: stm32: adopt generic iio bindings for adc channels on emstamp-argon ARM: dts: stm32: adopt generic iio bindings for adc channels on stm32mp157c-ed1 ARM: dts: stm32: enable adc on stm32mp15xx-dkx boards ARM: dts: stm32: add vrefint support to adc2 on stm32mp15 ARM: dts: stm32: add vrefint calibration on stm32mp15 ARM: dts: stm32: add adc internal channels to stm32mp15 ARM: dts: stm32: fix ltdc warnings in stm32mp15 boards ARM: dts: stm32: fix dsi warnings on stm32mp15 boards dt-bindings: display: st,stm32-dsi: Remove unnecessary fields ARM: dts: stm32: fix warnings on stm32f469-disco board ARM: dts: stm32: Shorten the AV96 HDMI sound card name ARM: dts: stm32: fix m4_rproc references to use SCMI for stm32mp15 ARM: dts: stm32: Update Cortex-M4 reset declarations on stm32mp15 ARM: dts: stm32: add STM32MP1-based Phytec board ... Link: https://lore.kernel.org/r/08d711de-bb6d-a976-735b-5e18b19818ea@foss.st.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> 
STM32 DT for v6.5, round 1

Highlights:
----------

- MCU/MPU:
  - Replace deprecated st,hw-flow-ctrl by uart-has-rtscts.
  - Fix LTDC/DSI warnings.

- MPU:
  - STMP32MP15:
    - Add OTP part number and Vrefint calibration in bsec.
    - M4 hold management updated. As SMC call is deprecated,
      the service is moved on a SCMI service.
    - Add ADC internal channels (VREFINT/VDDCORE).

  - ST:
    - Enable ADC1&2 on STM32MP15 DKx boards.
    - Adopt generic IIO bindings on STM32MP157C ED1
    - Add supplies for OV5640 in STM32MP157C EV1
      to fix yaml validation.
    - Fix i2s bindings to match with the YAML validation (DKx boards).

  - DH:
    - Rearrange MAC EEPROM.
    - Rename AV96 sound card.
    - Adopt generic IIo bindings.
    - Fix audio routing.

  -PHYTEC:
    - Add PHYTEC STM32MP1-3 Dev board based on STM32MP15 PHYTEC SOM.
      This SOM embeds up to 1GB DDR3LP RAM, up to 1GB eMMC,
      up to 16 MB QSPI and up to 128 GB NAND flash.

* tag 'stm32-dt-for-v6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (34 commits)
  ARM: dts: stm32: fix i2s endpoint format property for stm32mp15xx-dkx
  ARM: dts: stm32: Fix audio routing on STM32MP15xx DHCOM PDK2
  ARM: dts: stm32: add required supplies of ov5640 in stm32mp157c-ev1
  ARM: dts: stm32: Update to generic ADC channel binding on DHSOM systems
  ARM: dts: stm32: adopt generic iio bindings for adc channels on dhcor-testbench
  ARM: dts: stm32: adopt generic iio bindings for adc channels on dhcor-drc
  ARM: dts: stm32: adopt generic iio bindings for adc channels on emstamp-argon
  ARM: dts: stm32: adopt generic iio bindings for adc channels on stm32mp157c-ed1
  ARM: dts: stm32: enable adc on stm32mp15xx-dkx boards
  ARM: dts: stm32: add vrefint support to adc2 on stm32mp15
  ARM: dts: stm32: add vrefint calibration on stm32mp15
  ARM: dts: stm32: add adc internal channels to stm32mp15
  ARM: dts: stm32: fix ltdc warnings in stm32mp15 boards
  ARM: dts: stm32: fix dsi warnings on stm32mp15 boards
  dt-bindings: display: st,stm32-dsi: Remove unnecessary fields
  ARM: dts: stm32: fix warnings on stm32f469-disco board
  ARM: dts: stm32: Shorten the AV96 HDMI sound card name
  ARM: dts: stm32: fix m4_rproc references to use SCMI for stm32mp15
  ARM: dts: stm32: Update Cortex-M4 reset declarations on stm32mp15
  ARM: dts: stm32: add STM32MP1-based Phytec board
  ...

Link: https://lore.kernel.org/r/08d711de-bb6d-a976-735b-5e18b19818ea@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
ARM: dts: qcom: Add Samsung Galaxy Express support 2023-06-13T22:57:12+00:00 Rudraksha Gupta guptarud@gmail.com 2023-06-07T05:00:23+00:00 2b01dda16124696c4b64edcd31e8c2d37c559998 Add a very basic device tree file for the Samsung Galaxy Express SGH-I437. Currently, the following things work: UART, eMMC, SD Card, and USB. Signed-off-by: Rudraksha Gupta <guptarud@gmail.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230607050025.86636-5-guptarud@gmail.com 
Add a very basic device tree file for the Samsung Galaxy Express SGH-I437.
Currently, the following things work: UART, eMMC, SD Card, and USB.

Signed-off-by: Rudraksha Gupta <guptarud@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230607050025.86636-5-guptarud@gmail.com