Pull sound fixes from Takashi Iwai:
 "Hopefully the final pull request for 3.19: this ended up with a
  slightly higher volume than wished, but I put them all as they are
  either stable or 3.19 regression fixes.

  Most of commits are from ASoC, and have been stewed for a while in
  linux-next.  The only change in the common code is the regression
  fixes for ASoC AC97 stuff wrt device registrations.  The rest are
  device-specific, mostly small fixes in various ASoC drivers and ak411x
  on ice1724 boards"

* tag 'sound-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ASoC: Intel: fix sst firmware path for cht-bsw-rt5672
  ARM: dts: Fix I2S1, I2S2 compatible for exynos4 SoCs
  ASoC: sgtl5000: add delay before first I2C access
  MAINTAINERS: ASoC: add maintainer for Intel BDW/HSW ASoC driver
  ASoC: atmel_ssc_dai: fix the setting for DSP mode
  ASoC: sgtl5000: Use shift mask when setting codec mode
  ASoC: tlv320aic3x: Fix data delay configuration
  ALSA: ak411x: Fix stall in work callback
  ASoC: Intel: Used lock version to update shim registers
  ASoC: wm8731: init mutex in i2c init path
  ASoC: atmel_ssc_dai: fix start event for I2S mode
  ASoC: rt5640: Add RT5642 ACPI ID for Intel Baytrail
  ASoC: wm97xx: Reset AC'97 device before registering it
  ASoC: Add support for allocating AC'97 device before registering it

I2S1, I2S2 on Exynos4 SoC series have limited functionality compared
to I2S0, "samsung,s3c6410-i2s" compatible should be used for them.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org

Pull ARM fixes from Russell King:
 "A number of ARM fixes, the biggest is fixing a regression caused by
  appended DT blobs exceeding 64K, causing the decompressor fixup code
  to fail to patch the DT blob.  Another important fix is for the ASID
  allocator from Will Deacon which prevents some rare crashes seen on
  some systems.  Lastly, there's a build fix for v7M systems when printk
  support is disabled.

  The last two remaining fixes are more cosmetic - the IOMMU one
  prevents an annoying harmless warning message, and we disable the
  kernel strict memory permissions on non-MMU which can't support it
  anyway"

* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  ARM: 8299/1: mm: ensure local active ASID is marked as allocated on rollover
  ARM: 8298/1: ARM_KERNMEM_PERMS only works with MMU enabled
  ARM: 8295/1: fix v7M build for !CONFIG_PRINTK
  ARM: 8294/1: ATAG_DTB_COMPAT: remove the DT workspace's hardcoded 64KB size
  ARM: 8288/1: dma-mapping: don't detach devices without an IOMMU during teardown

Pull ARM SoC fixes from Olof Johansson:
 "One more week's worth of fixes.  Worth pointing out here are:

   - A patch fixing detaching of iommu registrations when a device is
     removed -- earlier the ops pointer wasn't managed properly
   - Another set of Renesas boards get the same GIC setup fixup as
     others have in previous -rcs
   - Serial port aliases fixups for sunxi.  We did the same to tegra but
     we caught that in time before the merge window due to more machines
     being affected.  Here it took longer for anyone to notice.
   - A couple more DT tweaks on sunxi
   - A follow-up patch for the mvebu coherency disabling in last -rc
     batch"

* tag 'armsoc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  arm: dma-mapping: Set DMA IOMMU ops in arm_iommu_attach_device()
  ARM: shmobile: r8a7790: Instantiate GIC from C board code in legacy builds
  ARM: shmobile: r8a73a4: Instantiate GIC from C board code in legacy builds
  ARM: mvebu: don't set the PL310 in I/O coherency mode when I/O coherency is disabled
  ARM: sunxi: dt: Fix aliases
  ARM: dts: sun4i: Add simplefb node with de_fe0-de_be0-lcd0-hdmi pipeline
  ARM: dts: sun6i: ippo-q8h-v5: Fix serial0 alias
  ARM: dts: sunxi: Fix usb-phy support for sun4i/sun5i

There is currently a hardcoded limit of 64KB for the DTB to live in and
be extended with ATAG info.  Some DTBs have outgrown that limit:

$ du -b arch/arm/boot/dts/omap3-n900.dtb
70212   arch/arm/boot/dts/omap3-n900.dtb

Furthermore, the actual size passed to atags_to_fdt() included the stack
size which is obviously wrong.

The initial DTB size is known, so use it to size the allocated workspace
with a 50% growth assumption and relocate the temporary stack above that.
This is also clamped to 32KB min / 1MB max for robustness against bad
DTB data.

Reported-by: Pali Rohár <pali.rohar@gmail.com>
Tested-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Pull networking fixes from David Miller:

 1) Don't OOPS on socket AIO, from Christoph Hellwig.

 2) Scheduled scans should be aborted upon RFKILL, from Emmanuel
    Grumbach.

 3) Fix sleep in atomic context in kvaser_usb, from Ahmed S Darwish.

 4) Fix RCU locking across copy_to_user() in bpf code, from Alexei
    Starovoitov.

 5) Lots of crash, memory leak, short TX packet et al bug fixes in
    sh_eth from Ben Hutchings.

 6) Fix memory corruption in SCTP wrt.  INIT collitions, from Daniel
    Borkmann.

 7) Fix return value logic for poll handlers in netxen, enic, and bnx2x.
    From Eric Dumazet and Govindarajulu Varadarajan.

 8) Header length calculation fix in mac80211 from Fred Chou.

 9) mv643xx_eth doesn't handle highmem correctly in non-TSO code paths.
    From Ezequiel Garcia.

10) udp_diag has bogus logic in it's hash chain skipping, copy same fix
    tcp diag used.  From Herbert Xu.

11) amd-xgbe programs wrong rx flow control register, from Thomas
    Lendacky.

12) Fix race leading to use after free in ping receive path, from Subash
    Abhinov Kasiviswanathan.

13) Cache redirect routes otherwise we can get a heavy backlog of rcu
    jobs liberating DST_NOCACHE entries.  From Hannes Frederic Sowa.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (48 commits)
  net: don't OOPS on socket aio
  stmmac: prevent probe drivers to crash kernel
  bnx2x: fix napi poll return value for repoll
  ipv6: replacing a rt6_info needs to purge possible propagated rt6_infos too
  sh_eth: Fix DMA-API usage for RX buffers
  sh_eth: Check for DMA mapping errors on transmit
  sh_eth: Ensure DMA engines are stopped before freeing buffers
  sh_eth: Remove RX overflow log messages
  ping: Fix race in free in receive path
  udp_diag: Fix socket skipping within chain
  can: kvaser_usb: Fix state handling upon BUS_ERROR events
  can: kvaser_usb: Retry the first bulk transfer on -ETIMEDOUT
  can: kvaser_usb: Send correct context to URB completion
  can: kvaser_usb: Do not sleep in atomic context
  ipv4: try to cache dst_entries which would cause a redirect
  samples: bpf: relax test_maps check
  bpf: rcu lock must not be held when calling copy_to_user()
  net: sctp: fix slab corruption from use after free on INIT collisions
  net: mv643xx_eth: Fix highmem support in non-TSO egress path
  sh_eth: Fix serialisation of interrupt disable with interrupt & NAPI handlers
  ...

Merge "Allwinner fixes for 3.19" from Maxime Ripard:

Allwinner fixes for 3.19

A few minor fixes for the 3.19 kernel:
  - The 8250 uart driver now respects the aliases, which pointed out that we
    were using them wrong. Fixed them.
  - The simplefb pipeline that was used on the A10 caused flickering and
    tearing, and rendered it pretty much useless. Added a new simplefb node
    with another pipeline that removes this issue. Note that we need to keep
    the old node because u-boot 2015.01 uses it.
  - Added a fix for the USB phy node on sun4i/sun5i

* tag 'sunxi-fixes-for-3.19' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
  ARM: sunxi: dt: Fix aliases
  ARM: dts: sun4i: Add simplefb node with de_fe0-de_be0-lcd0-hdmi pipeline
  ARM: dts: sun6i: ippo-q8h-v5: Fix serial0 alias
  ARM: dts: sunxi: Fix usb-phy support for sun4i/sun5i

Signed-off-by: Olof Johansson <olof@lixom.net>

Pull ARM SoC fixes from Olof Johansson:
 "A week's worth of fixes for various ARM platforms.  Diff wise, the
  largest fix is for OMAP to deal with how GIC now registers interrupts
  (irq_domain_add_legacy() -> irq_domain_add_linear() changes).

  Besides this, a few more renesas platforms needed the GIC instatiation
  done for legacy boards.  There's also a fix that disables coherency of
  mvebu due to issues, and a few other smaller fixes"

* tag 'armsoc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  arm64: dts: add baud rate to Juno stdout-path
  ARM: dts: imx25: Fix PWM "per" clocks
  bus: mvebu-mbus: fix support of MBus window 13
  Merge tag 'mvebu-fixes-3.19-3' of git://git.infradead.org/linux-mvebu into fixes
  ARM: mvebu: completely disable hardware I/O coherency
  ARM: OMAP: Work around hardcoded interrupts
  ARM: shmobile: r8a7779: Instantiate GIC from C board code in legacy builds
  ARM: shmobile: r8a7778: Instantiate GIC from C board code in legacy builds
  arm: boot: dts: dra7: enable dwc3 suspend PHY quirk

Commit f77d55a3b56a ("serial: 8250_dw: get index of serial line from DT
aliases") made the serial driver now use the serial aliases to get the tty
number, pointing out that our aliases have been wrong all along.

Remove them from the DTSI and add custom ones in the relevant boards.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>