commit e1e5b7e4251c7538ca08c2c5545b0c2fbd8a6635 upstream.

This patch zeroes the SCTLR.TRE bit prior to setting the mapping as
cacheable for ARMv7 cores in the decompressor, ensuring that the
memory region attributes are obtained from the C and B bits, not from
the page tables.

Cc: Nicolas Pitre <nico@fluxnic.net>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Matthew Leach <matthew.leach@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit a46d2619d7180bda12bad2bf15bbd0731dfc2dcf upstream.

The binding doc and dts use properties "fsl,{cd,wp}-internal" while
esdhc driver uses "fsl,{cd,wp}-controller".  Fix binding doc and dts
to get them match driver code.

Reported-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

commit 9c5fd9e85f574d9d0361b2b878f55732290afe5b upstream.

atags_to_fdt() returns 1 when it fails to find a valid FDT signature.
The CONFIG_ARM_ATAG_DTB_COMPAT code is supposed to retry with another
location, but only does so when the initial call doesn't fail.

Fix this by using the correct condition in the assembly code.

Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

* 'fixes' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm:
  ARM: wire up process_vm_writev and process_vm_readv syscalls
  ARM: 7160/1: setup: avoid overflowing {elf,arch}_name from proc_info_list
  ARM: 7158/1: add new MFP implement for NUC900
  ARM: 7157/1: fix a building WARNING for nuc900
  ARM: 7156/1: l2x0: fix compile error on !CONFIG_USE_OF
  ARM: 7155/1: arch.h: Declare 'pt_regs' locally
  ARM: 7154/1: mach-bcmring: fix build error in dma.c
  ARM: 7153/1: mach-bcmring: fix build error in core.c
  ARM: 7152/1: distclean: Remove generated .dtb files
  ARM: 7150/1: Allow kernel unaligned accesses on ARMv6+ processors
  ARM: 7149/1: spi/pl022: Enable clock in probe
  Revert "ARM: 7098/1: kdump: copy kernel relocation code at the kexec prepare stage"

Ventana uses the same SDHCI GPIOs as Seaboard; PI6 (70) is the power GPIO
for the SD port, and there is no power GPIO for the MMC chip.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

The patch 'arm/dt: Add dtb make rule' adds support to
create a .dtb file. But this is never removed afterwards.
Remove the generated .dtb file if 'distclean' is called.

Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Shawn Guo <shawn.guo@freescale.com>
Cc: Jason Liu <jason.hui@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

* 'next/soc' of git://git.linaro.org/people/arnd/arm-soc: (21 commits)
  MAINTAINERS: add ARM/FREESCALE IMX6 entry
  arm/imx: merge i.MX3 and i.MX6
  arm/imx6q: add suspend/resume support
  arm/imx6q: add device tree machine support
  arm/imx6q: add smp and cpu hotplug support
  arm/imx6q: add core drivers clock, gpc, mmdc and src
  arm/imx: add gic_handle_irq function
  arm/imx6q: add core definitions and low-level debug uart
  arm/imx6q: add device tree source
  ARM: highbank: add suspend support
  ARM: highbank: Add cpu hotplug support
  ARM: highbank: add SMP support
  MAINTAINERS: add Calxeda Highbank ARM platform
  ARM: add Highbank core platform support
  ARM: highbank: add devicetree source
  ARM: l2x0: add empty l2x0_of_init
  picoxcell: add a definition of VMALLOC_END
  picoxcell: remove custom ioremap implementation
  picoxcell: add the DTS for the PC7302 board
  picoxcell: add the DTS for pc3x2 and pc3x3 devices
  ...

Fix up trivial conflicts in arch/arm/Kconfig, and some more header file
conflicts in arch/arm/mach-omap2/board-generic.c (as per an ealier merge
by Arnd).

* 'next/dt' of git://git.linaro.org/people/arnd/arm-soc:
  ARM: gic: use module.h instead of export.h
  ARM: gic: fix irq_alloc_descs handling for sparse irq
  ARM: gic: add OF based initialization
  ARM: gic: add irq_domain support
  irq: support domains with non-zero hwirq base
  of/irq: introduce of_irq_init
  ARM: at91: add at91sam9g20 and Calao USB A9G20 DT support
  ARM: at91: dt: at91sam9g45 family and board device tree files
  arm/mx5: add device tree support for imx51 babbage
  arm/mx5: add device tree support for imx53 boards
  ARM: msm: Add devicetree support for msm8660-surf
  msm_serial: Add devicetree support
  msm_serial: Use relative resources for iomem

Fix up conflicts in arch/arm/mach-at91/{at91sam9260.c,at91sam9g45.c}

* 'next/cleanup2' of git://git.linaro.org/people/arnd/arm-soc: (31 commits)
  ARM: OMAP: Warn if omap_ioremap is called before SoC detection
  ARM: OMAP: Move set_globals initialization to happen in init_early
  ARM: OMAP: Map SRAM later on with ioremap_exec()
  ARM: OMAP: Remove calls to SRAM allocations for framebuffer
  ARM: OMAP: Avoid cpu_is_omapxxxx usage until map_io is done
  ARM: OMAP1: Use generic map_io, init_early and init_irq
  arm/dts: OMAP3+: Add mpu, dsp and iva nodes
  arm/dts: OMAP4: Add a main ocp entry bound to l3-noc driver
  ARM: OMAP2+: l3-noc: Add support for device-tree
  ARM: OMAP2+: board-generic: Add i2c static init
  ARM: OMAP2+: board-generic: Add DT support to generic board
  arm/dts: Add support for OMAP3 Beagle board
  arm/dts: Add initial device tree support for OMAP3 SoC
  arm/dts: Add support for OMAP4 SDP board
  arm/dts: Add support for OMAP4 PandaBoard
  arm/dts: Add initial device tree support for OMAP4 SoC
  ARM: OMAP: omap_device: Add a method to build an omap_device from a DT node
  ARM: OMAP: omap_device: Add omap_device_[alloc|delete] for DT integration
  of: Add helpers to get one string in multiple strings property
  ARM: OMAP2+: devices: Remove all omap_device_pm_latency structures
  ...

Fix up trivial header file conflicts in arch/arm/mach-omap2/board-generic.c

* 'next/devel' of git://git.linaro.org/people/arnd/arm-soc: (50 commits)
  ARM: tegra: update defconfig
  arm/tegra: Harmony: Configure PMC for low-level interrupts
  arm/tegra: device tree support for ventana board
  arm/tegra: add support for ventana pinmuxing
  arm/tegra: prepare Seaboard pinmux code for derived boards
  arm/tegra: pinmux: ioremap registers
  gpio/tegra: Convert to a platform device
  arm/tegra: Convert pinmux driver to a platform device
  arm/dt: Tegra: Add pinmux node to tegra20.dtsi
  arm/tegra: Prep boards for gpio/pinmux conversion to pdevs
  ARM: mx5: fix clock usage for suspend
  ARM i.MX entry-macro.S: remove now unused code
  ARM i.MX boards: use CONFIG_MULTI_IRQ_HANDLER
  ARM i.MX tzic: add handle_irq function
  ARM i.MX avic: add handle_irq function
  ARM: mx25: Add the missing IIM base definition
  ARM i.MX avic: convert to use generic irq chip
  mx31moboard: Add poweroff support
  ARM: mach-qong: Add watchdog support
  ARM: davinci: AM18x: Add wl1271/wlan support
  ...

Fix up conflicts in:
	arch/arm/mach-at91/at91sam9g45.c
	arch/arm/mach-mx5/devices-imx53.h
	arch/arm/plat-mxc/include/mach/memory.h