Pull "mvebu fixes for 4.10 (part 1)" from Gregory CLEMENT:

More consistent naming for some orion5x based boards helping the
switch to device tree for debian users.

* tag 'mvebu-fixes-4.10-1' of git://git.infradead.org/linux-mvebu:
  ARM: orion5x: fix Makefile for linkstation-lschl.dtb
  ARM: dts: orion5x-lschl: More consistent naming on linkstation series
  ARM: dts: orion5x-lschl: Fix model name

The rename of orion5x-lschl.dts needs to be reflected in the Makefile:

make[3]: *** No rule to make target 'arch/arm/boot/dts/orion5x-lschl.dtb', needed by '__build'.

Fixes: 6cfd3cd8d836 ("ARM: dts: orion5x-lschl: More consistent naming on linkstation series")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

DTS files, which includes orion5x-linkstation.dtsi, are named:
  orion5x-linkstation-*.dts

So we rename the file below:
  arch/arm/boot/dts/orion5x-lschl.dts
to the new name:
  arch/arm/boot/dts/orion5x-linkstation-lschl.dts

Because DTS conversion of this device was just introduced in 4.9, Debian
is still using legacy device support, other distros are the same,
so here we won't expect any impact actually.

Fixes: f94f268979a2 ("ARM: dts: orion5x: convert ls-chl to FDT")
Cc: Ashley Hughes <ashley.hughes@blueyonder.co.uk>
Signed-off-by: Roger Shimizu <rogershimizu@gmail.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

Model name should be consistent with legacy device file, so that user
can migrate their system from legacy device support to device-tree
safely.

Legacy device file is currently removed, but it can be found on 4.8
or previous version of linux:
  arch/arm/mach-orion5x/ls-chl-setup.c

Fixes: f94f268979a2 ("ARM: dts: orion5x: convert ls-chl to FDT")
Cc: Ashley Hughes <ashley.hughes@blueyonder.co.uk>
Signed-off-by: Roger Shimizu <rogershimizu@gmail.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

STi DT fix:

Since v4.10-rc1, xhci is complaining in loop with :
    [  801.953836] usb usb6-port1: Cannot enable. Maybe the USB cable is bad?
    [  801.960455] xhci-hcd xhci-hcd.0.auto: Cannot set link state.
    [  801.966611] usb usb6-port1: cannot disable (err = -32)

set property "snps,dis_u3_susphy_quirk" in DT fix it.

* tag 'sti-dt-for-v4.10-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti:
  ARM: dts: STiH407-family: set snps,dis_u3_susphy_quirk

Signed-off-by: Olof Johansson <olof@lixom.net>

Pull "i.MX fixes for 4.10, 3rd round" from Shawn Guo:
 - Fix a 'defined but not used' warning in MMDC driver when
   CONFIG_PERF_EVENTS is disabled.
 - Fix i.MX6DL device tree GPIO4_11 range setting.
 - A bandaid fix for boot failure found on a couple of platforms due to
   missing 'chosen' and 'memory' node.

* tag 'imx-fixes-4.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: dts: imx: Pass 'chosen' and 'memory' nodes
  ARM: dts: imx6dl: fix GPIO4 range
  ARM: imx: hide unused variable in #ifdef

Since v4.10-rc1, the following logs appears in loop :
[  801.953836] usb usb6-port1: Cannot enable. Maybe the USB cable is bad?
[  801.960455] xhci-hcd xhci-hcd.0.auto: Cannot set link state.
[  801.966611] usb usb6-port1: cannot disable (err = -32)
[  806.083772] usb usb6-port1: Cannot enable. Maybe the USB cable is bad?
[  806.090370] xhci-hcd xhci-hcd.0.auto: Cannot set link state.
[  806.096494] usb usb6-port1: cannot disable (err = -32)

After analysis, xhci try to set link in U3 and returns an error.
Using snps,dis_u3_susphy_quirk fix this issue.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>

Commit 7f107887d199 ("ARM: dts: imx: Remove skeleton.dtsi") causes boot
issues when the bootloader does not create a 'chosen' node if such node
is not present in the dtb.

The reason for the boot failure is well explained by Javier Martinez
Canillas: "the decompressor relies on a pre-existing chosen node to be
available to insert the command line and merge other ATAGS info."

, so pass an empty 'chosen' node to fix the boot problem.

This issue has been seen in the kernelci reports with Barebox as
bootloader.

Also pass the 'memory' node in order to fix boot issues on the SolidRun
iMX6 platforms.

Fixes: 7f107887d199 ("ARM: dts: imx: Remove skeleton.dtsi")
Reported-by: kernelci.org bot <bot@kernelci.org>
Reported-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

GPIO4_11 is on pin 152(MX6DL_PAD_KEY_ROW2) and not on pin
151(MX6DL_PAD_KEY_ROW1).

I found the error while booting a mainline kernel on APF6S SoM and
noticed the following message:

[    2.609337] imx6dl-pinctrl 20e0000.iomuxc: pin MX6DL_PAD_KEY_ROW1
already requested by 20a8000.gpio:105; cannot claim for 20a8000.gpio:107
[    2.621884] imx6dl-pinctrl 20e0000.iomuxc: pin-151 (20a8000.gpio:107)
status -22
[    2.629303] spi_imx 2008000.ecspi: Can't get CS GPIO 107

With this patch, the message is gone and spi_imx driver probes correctly.

Fixes: bb728d662bed ("ARM: dts: add gpio-ranges property to iMX GPIO controllers")
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Read access to the SPI flash are broken on da850-evm, i.e. the data
read is not what is actually programmed on the flash.
According to the datasheet for the M25P64 part present on the da850-evm,
if the SPI frequency is higher than 20MHz then the READ command is not
usable anymore and only the FAST_READ command can be used to read data.

This commit specifies in the DTS that we should use FAST_READ command
instead of the READ command.

Cc: stable@vger.kernel.org
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Fabien Parent <fparent@baylibre.com>
[nsekhar@ti.com: subject line adjustment]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

Signed-off-by: Olof Johansson <olof@lixom.net>