linux-toradex.git/arch/arm/boot, branch v4.2.4

ARM: dts: fix usb pin control for imx-rex dts

2015-10-22T21:49:17+00:00

commit 0af822110871400908d5b6f83a8908c45f881d8f upstream.

This fixes a duplicated pin control causing this error:

imx6q-pinctrl 20e0000.iomuxc: pin MX6Q_PAD_GPIO_1 already
requested by regulators:regulator@2; cannot claim for 2184000.usb
imx6q-pinctrl 20e0000.iomuxc: pin-137 (2184000.usb) status -22
imx6q-pinctrl 20e0000.iomuxc: could not request pin 137
(MX6Q_PAD_GPIO_1) from group usbotggrp  on device 20e0000.iomuxc
imx_usb 2184000.usb: Error applying setting, reverse things
back
imx6q-pinctrl 20e0000.iomuxc: pin MX6Q_PAD_EIM_D31 already
requested by regulators:regulator@1; cannot claim for 2184200.usb
imx6q-pinctrl 20e0000.iomuxc: pin-52 (2184200.usb) status -22
imx6q-pinctrl 20e0000.iomuxc: could not request pin 52 (MX6Q_PAD_EIM_D31)
from group usbh1grp  on device 20e0000.iomuxc
imx_usb 2184200.usb: Error applying setting, reverse things
back

Signed-off-by: Felipe F. Tonello 
Fixes: e2047e33f2bd ("ARM: dts: add initial Rex Pro board support")
Signed-off-by: Shawn Guo 
Signed-off-by: Greg Kroah-Hartman

ARM: dts: Fix wrong clock binding for sysmmu_fimd1_1 on exynos5420

2015-10-22T21:49:17+00:00

commit c7d2ecd9f64c351cb4d551f1f472d0fc09c3cae8 upstream.

The sysmmu_fimd1_1 should bind the clock CLK_SMMU_FIMD1M1, not the clock
CLK_SMMU_FIMD1M0. CLK_SMMU_FIMD1M0 is a clock for the sysmmu_fimd1_0.

This wrong clock binding causes the problem that is blocked in iommu_map
function when IOMMU is enabled and exynos-drm driver tries to allocate
buffer via DMA mapping API on Odroid-XU3 board.

Fixes: b70045167815 ("ARM: dts: add sysmmu nodes for exynos5420")
Signed-off-by: Joonyoung Shim 
Reviewed-by: Javier Martinez Canillas 
Acked-by: Marek Szyprowski 
Signed-off-by: Krzysztof Kozlowski 
Signed-off-by: Greg Kroah-Hartman

ARM: dts: sunxi: Raise minimum CPU voltage for sun7i-a20 to meet SoC specifications

2015-10-22T21:49:17+00:00

commit eaeef1ad9b6ea6df1d1220c254d9563da60cb9d1 upstream.

sun7i-a20.dtsi contains a cpufreq operating point at 0.9 volts. The minimum
CPU voltage for the Allwinner A20 SoC, however, is 1.0 volts. Thus, raise
the voltage for the lowest operating point to 1.0 volts in order to stay
within the SoC specifications. It is an undervolted setting that isn't
stable across all SoCs and boards out there.

Fixes: d96b7161916f ("ARM: dts: sun7i: Add cpu clock reference and operating points to dtsi")
Signed-off-by: Timo Sigurdsson 
Acked-by: Iain Paton 
Signed-off-by: Maxime Ripard 
Signed-off-by: Greg Kroah-Hartman

ARM: dts: omap3-beagle: make i2c3, ddc and tfp410 gpio work again

2015-10-22T21:49:16+00:00

commit 3a2fa775bd1d0579113666c1a2e37654a34018a0 upstream.

Let's fix pinmux address of gpio 170 used by tfp410 powerdown-gpio.

According to the OMAP35x Technical Reference Manual
  CONTROL_PADCONF_I2C3_SDA[15:0]  0x480021C4 mode0: i2c3_sda
  CONTROL_PADCONF_I2C3_SDA[31:16] 0x480021C4 mode4: gpio_170
the pinmux address of gpio 170 must be 0x480021C6.

The former wrong address broke i2c3 (used by hdmi ddc), resulting in
kernel message:
  omap_i2c 48060000.i2c: controller timed out

Fixes: 8cecf52befd7 ("ARM: omap3-beagle.dts: add display information")
Signed-off-by: Carl Frederik Werner 
Signed-off-by: Tony Lindgren 
Signed-off-by: Greg Kroah-Hartman

ARM: dts: omap5-uevm.dts: fix i2c5 pinctrl offsets

2015-10-22T21:49:16+00:00

commit 1dbdad75074d16c3e3005180f81a01cdc04a7872 upstream.

The i2c5 pinctrl offsets are wrong. If the bootloader doesn't set the
pins up, communication with tca6424a doesn't work (controller timeouts)
and it is not possible to enable HDMI.

Fixes: 9be495c42609 ("ARM: dts: omap5-evm: Add I2c pinctrl data")
Signed-off-by: Grazvydas Ignotas 
Signed-off-by: Tony Lindgren 
Signed-off-by: Greg Kroah-Hartman

lib/decompressors: use real out buf size for gunzip with kernel

2015-09-29T17:33:37+00:00

commit 2d3862d26e67a59340ba1cf1748196c76c5787de upstream.

When loading x86 64bit kernel above 4GiB with patched grub2, got kernel
gunzip error.

| early console in decompress_kernel
| decompress_kernel:
|       input: [0x807f2143b4-0x807ff61aee]
|      output: [0x807cc00000-0x807f3ea29b] 0x027ea29c: output_len
| boot via startup_64
| KASLR using RDTSC...
|  new output: [0x46fe000000-0x470138cfff] 0x0338d000: output_run_size
|  decompress: [0x46fe000000-0x47007ea29b] <=== [0x807f2143b4-0x807ff61aee]
|
| Decompressing Linux... gz...
|
| uncompression error
|
| -- System halted

the new buffer is at 0x46fe000000ULL, decompressor_gzip is using
0xffffffb901ffffff as out_len.  gunzip in lib/zlib_inflate/inflate.c cap
that len to 0x01ffffff and decompress fails later.

We could hit this problem with crashkernel booting that uses kexec loading
kernel above 4GiB.

We have decompress_* support:
    1. inbuf[]/outbuf[] for kernel preboot.
    2. inbuf[]/flush() for initramfs
    3. fill()/flush() for initrd.
This bug only affect kernel preboot path that use outbuf[].

Add __decompress and take real out_buf_len for gunzip instead of guessing
wrong buf size.

Fixes: 1431574a1c4 (lib/decompressors: fix "no limit" output buffer length)
Signed-off-by: Yinghai Lu 
Cc: Alexandre Courbot 
Cc: Jon Medhurst 
Cc: Stephen Warren 
Cc: "H. Peter Anvin" 
Cc: Thomas Gleixner 
Cc: Ingo Molnar 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

ARM: dts: rockchip: fix rk3288 watchdog irq

2015-09-21T17:10:58+00:00

commit 1a1b698b115467242303daf5fe1d3c9886c2fa17 upstream.

The watchdog irq is actually SPI 79, which translates to the original
111 in the manual where the SPI irqs start at 32.
The current dw_wdt driver does not use the irq at all, so this issue
never surfaced. Nevertheless fix this for a time we want to use the irq.

Fixes: 2ab557b72d46 ("ARM: dts: rockchip: add core rk3288 dtsi")
Signed-off-by: Heiko Stuebner 
Reviewed-by: Douglas Anderson 
Signed-off-by: Greg Kroah-Hartman

ARM: dts: fix clock-frequency of display timing0 for exynos3250-rinato

2015-09-21T17:10:58+00:00

commit 65e3293381e1cf1abcfe1aa22b914650a40e3af4 upstream.

After the commit abc0b1447d49 ("drm: Perform basic sanity checks on
probed modes"), proper clock-frequency becomes mandatory for
validating the mode of panel.  The display does not work if there is
no mode validated. Also, this clock-frequency must be set
appropriately for getting required frame rate.

Fixes: abc0b1447d49 ("drm: Perform basic sanity checks on probed modes")
Signed-off-by: Hyungwon Hwang 
Signed-off-by: Krzysztof Kozlowski 
Sigend-off-by: Kukjin Kim 
Signed-off-by: Greg Kroah-Hartman

Merge tag 'armsoc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2015-08-16T22:44:33+00:00

Pull ARM SoC fixes from Olof Johansson:
 "A smallish batch of fixes, a little more than expected this late, but
  all fixes are contained to their platforms and seem reasonably low
  risk:

   - a somewhat large SMP fix for ux500 that still seemed warranted to
     include here
   - OMAP DT fixes for pbias regulator specification that broke due to
     some DT reshuffling
   - PCIe IRQ routing bugfix for i.MX
   - networking fixes for keystone
   - runtime PM for OMAP GPMC
   - a couple of error path bug fixes for exynos"

* tag 'armsoc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: dts: keystone: Fix the mdio bindings by moving it to soc specific file
  ARM: dts: keystone: fix the clock node for mdio
  memory: omap-gpmc: Don't try to save uninitialized GPMC context
  ARM: imx6: correct i.MX6 PCIe interrupt routing
  ARM: ux500: add an SMP enablement type and move cpu nodes
  ARM: dts: dra7: Fix broken pbias device creation
  ARM: dts: OMAP5: Fix broken pbias device creation
  ARM: dts: OMAP4: Fix broken pbias device creation
  ARM: dts: omap243x: Fix broken pbias device creation
  ARM: EXYNOS: fix double of_node_put() on error path
  ARM: EXYNOS: Fix potentian kfree() of ro memory

Merge tag 'keystone-dts-late-fixes-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into fixes

2015-08-16T19:29:57+00:00

ARM: Couple of Keysyone MDIO DTS fixes for 4.2-rc6+

These are necessary to get the NIC card working on all Keystone
EVMs. Couple of boards are broken without these two fixes.

* tag 'keystone-dts-late-fixes-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
  ARM: dts: keystone: Fix the mdio bindings by moving it to soc specific file
  ARM: dts: keystone: fix the clock node for mdio

Signed-off-by: Olof Johansson