Renesas fixes for v5.7 (take two)
- Fix a wrong clock configuration on R-Mobile A1,
- Minor fixes that are fast-tracked to avoid introducing regressions
during conversion of DT bindings to json-schema.
* tag 'renesas-fixes-for-v5.7-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
ARM: dts: iwg20d-q7-dbcm-ca: Remove unneeded properties in hdmi@39
ARM: dts: renesas: Make hdmi encoder nodes compliant with DT bindings
arm64: dts: renesas: Make hdmi encoder nodes compliant with DT bindings
ARM: dts: r8a7740: Add missing extal2 to CPG node
Link: https://lore.kernel.org/r/20200515125043.22811-1-geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Remove the adi,input-style and adi,input-justification properties of hdmi@39 to make it compliant with the "adi,adv7511w" DT binding. Signed-off-by: Ricardo Cañuelo <ricardo.canuelo@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/20200511110611.3142-6-ricardo.canuelo@collabora.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Small fixes to make these DTs compliant with the adi,adv7511w and
adi,adv7513 bindings:
r8a7745-iwg22d-sodimm-dbhd-ca.dts
r8a7790-lager.dts
r8a7790-stout.dts
r8a7791-koelsch.dts
r8a7791-porter.dts
r8a7792-blanche.dts
r8a7793-gose.dts
r8a7794-silk.dts:
Remove the adi,input-style and adi,input-justification properties.
r8a7792-wheat.dts:
Reorder the I2C slave addresses of hdmi@3d and hdmi@39 and remove
the adi,input-style and adi,input-justification properties.
Signed-off-by: Ricardo Cañuelo <ricardo.canuelo@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20200511110611.3142-3-ricardo.canuelo@collabora.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Fixes for omaps for v5.6-rc cycle Few device tree fixes for various devices: - A regression fix for non-existing can device on am534x-idk - Fix missing dma-ranges for dra7 pcie - Fix flakey wlan on droid4 where some devices would not connect at all because of internal pull being used with an external pull - Fix occasional missed wake-up events on droid4 modem uart * tag 'omap-for-v5.6/fixes-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: omap4-droid4: Fix occasional lost wakeirq for uart1 ARM: dts: omap4-droid4: Fix flakey wlan by disabling internal pull for gpio ARM: dts: dra7: Fix bus_dma_limit for PCIe ARM: dts: am574x-idk: Disable m_can node Link: https://lore.kernel.org/r/pull-1588872844-804667@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Some fixes for the newly added Pinebook Pro and other fixes to make dtc and the new dtscheck against yaml bindings happy. * tag 'v5.7-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: fix pinctrl sub nodename for spi in rk322x.dtsi arm64: dts: rockchip: Fix Pinebook Pro FUSB302 interrupt ARM: dts: rockchip: swap clock-names of gpu nodes arm64: dts: rockchip: swap interrupts interrupt-names rk3399 gpu node arm64: dts: rockchip: fix status for &gmac2phy in rk3328-evb.dts arm64: dts: rockchip: remove extra assigned-clocks property from &gmac2phy node in rk3328-evb.dts ARM: dts: rockchip: fix phy nodename for rk3229-xms6 ARM: dts: rockchip: fix phy nodename for rk3228-evb arm64: dts: rockchip: Rename dwc3 device nodes on rk3399 to make dtc happy arm64: dts: rockchip: drop #address-cells, #size-cells from rk3399 pmugrf node arm64: dts: rockchip: drop #address-cells, #size-cells from rk3328 grf node arm64: dts: rockchip: drop non-existent gmac2phy pinmux options from rk3328 arm64: dts: rockchip: Replace RK805 PMIC node name with "pmic" on rk3328 boards arm64: dts: rockchip: enable DC charger detection pullup on Pinebook Pro arm64: dts: rockchip: fix inverted headphone detection on Pinebook Pro arm64: dts: rockchip: Correct PMU compatibles for PX30 and RK3308 Link: https://lore.kernel.org/r/1738941.6LdaBJIBqS@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Renesas fixes for v5.7
- Fix IOMMU support on R-Car V3H,
- Minor fixes that are fast-tracked to avoid introducing regressions
during conversion of DT bindings to json-schema.
* tag 'renesas-fixes-for-v5.7-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
ARM: dts: r7s9210: Remove bogus clock-names from OSTM nodes
arm64: dts: renesas: r8a77980: Fix IPMMU VIP[01] nodes
ARM: dts: r8a73a4: Add missing CMT1 interrupts
Link: https://lore.kernel.org/r/20200430084834.1384-1-geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
i.MX fixes for 5.7: - Set correct AHB clock for i.MX8MN SDMA1 device to fix a "Timeout waiting for CH0" error. - Fix a linker error for i.MX6 configurations that have ARM_CPU_SUSPEND=n, which can happen if neither CONFIG_PM, CONFIG_CPU_IDLE, nor ARM_PSCI_FW are selected. - Fix I2C1 pinctrl configuration for i.MX27 phytec-phycard board. - Fix i.MX8M AIPS 'reg' properties to remove DTC simple_bus_reg warnings. - Add missing compatible "fsl,vf610-edma" for LS1028A EDMA device, so that bootloader can fix up the IOMMU entries there. Otherwise, EDMA just doesn't work on LS1028A with shipped bootloader. - Fix imx6dl-yapp4-ursa board Ethernet connection. - Fix input_val for AUDIOMIX_BIT_STREAM pinctrl defines on i.MX8MP according to Reference Manual. * tag 'imx-fixes-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: dts: freescale: imx8mp: update input_val for AUDIOMIX_BIT_STREAM arm64: dts: imx8m: Fix AIPS reg properties arm64: dts: imx8mn: Change SDMA1 ahb clock for imx8mn ARM: dts: imx27-phytec-phycard-s-rdk: Fix the I2C1 pinctrl entries ARM: imx: provide v7_cpu_resume() only on ARM_CPU_SUSPEND=y ARM: dts: imx6dl-yapp4: Fix Ursa board Ethernet connection arm64: dts: ls1028a: add "fsl,vf610-edma" compatible dt-bindings: dma: fsl-edma: fix ls1028a-edma compatible Link: https://lore.kernel.org/r/20200429063226.GT32592@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Clock Pulse Generator (CPG) device node lacks the extal2 clock.
This may lead to a failure registering the "r" clock, or to a wrong
parent for the "usb24s" clock, depending on MD_CK2 pin configuration and
boot loader CPG_USBCKCR register configuration.
This went unnoticed, as this does not affect the single upstream board
configuration, which relies on the first clock input only.
Fixes: d9ffd583bf345e2e ("ARM: shmobile: r8a7740: add SoC clocks to DTS")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
Link: https://lore.kernel.org/r/20200508095918.6061-1-geert+renesas@glider.be
Looks like using the UART CTS pin does not always trigger for a wake-up when the SoC is idle. This is probably because the modem first uses gpio_149 to signal the SoC that data will be sent, and the CTS will only get used later when the data transfer is starting. Let's fix the issue by configuring the gpio_149 pad as the wakeirq for UART. We have gpio_149 managed by the USB PHY for powering up the right USB mode, and after that, the gpio gets recycled as the modem wake-up pin. If needeed, the USB PHY can also later on be configured to use gpio_149 pad as the wakeirq as a shared irq. Let's also configure the missing properties for uart-has-rtscts and current-speed for the modem port while at it. We already configure the hardware flow control pins with uart1_pins pinctrl setting. Cc: maemo-leste@lists.dyne.org Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
The wlan on droid4 is flakey on some devices, and experiments have shown this gets fixed if we disable the internal pull for wlan gpio interrupt line. The symptoms are that the wlan connection is very slow and almost useless with lots of wlcore firmware reboot warnings in the dmesg. In addition to configuring the wlan gpio pulls, let's also configure the rest of the wlan sd pins. We have not configured those eariler as we're booting using kexec. Signed-off-by: Tony Lindgren <tony@atomide.com>